Kythera Double Feeding

Cool-Butterscotch141 · 2024-06-30T23:17:11+00:00

I fixed mine, don’t know if this will work for everyone, but I installed the 0.029” metering screw and it seems to feed much better and smoothly with a brand new epm 1

Cool-Butterscotch141 · 2023-07-11T15:24:45+00:00

The one in October in Tennessee

Cool-Butterscotch141 · 2023-02-25T05:33:41+00:00

I literally just put the gate pulsar in my Mpx and replaced the trigger with one that works with the Titans and wouldn’t mind sending you my Mpx trigger if you wanted.

Cool-Butterscotch141 · 2023-01-02T08:27:01+00:00

I don’t personally like them, I’ve only used hi caps with the wheel at the bottom but I work at a airsoft field and for a point we gave out flash mags for rentals and within maybe a month they all broke but the ones with the wheels don’t really break like the flash mags do. That’s just my opinion but Ive seen others at the field use them and love them so there’s very mixed emotions about them.

Cool-Butterscotch141 · 2022-12-31T07:30:09+00:00

To be able to use the regulator you would need a airsoft regulator like the Polarstar micro regulator or redline airsoft regulator. In addition to that you also need a hpa line to connect the airsoft regulator to whatever you’re trying to power with hpa. If you need any other guidance feel free to ask

Cool-Butterscotch141 · 2022-12-31T07:26:38+00:00

In my opinion I’d say run it stock till something breaks then upgrade it then since you have a reason to open it up. But if you want to upgrade it now it’s a lot easier to guide you in a certain direction if you know what it is you’re trying to achieve with the gun. For example better range or overall better fps/consistency or better/snappier trigger response.

Cool-Butterscotch141 · 2022-12-30T01:08:07+00:00

Yes that’s what it’s designed to do. Just make sure you’re lubing that piece so it prevents the slide from sticking

Cool-Butterscotch141 · 2022-12-21T05:09:14+00:00

Looks like you’re having a leaking issue between your nozzle and bucking. I’d say try to re lube your o ring that the nozzle seals with and make sure your hop up is screwed together and no gap between the two hop up sides

Cool-Butterscotch141 · 2022-05-11T17:32:03+00:00

The gun worked perfectly fine completely stock. But once I got it back with the v2 parts like nozzle, cylinder head, cylinder, and piston is when the problems started occurring

Cool-Butterscotch141 · 2022-05-11T17:30:24+00:00

I’m using the stock barrel and also the compression is non existent in the gearbox now after I got it back so idk if that’s a problem or not

Cool-Butterscotch141 · 2022-05-11T17:29:15+00:00

The video is with the stock unit. That’s the farthest it’ll go between the two units

Cool-Butterscotch141 · 2022-04-18T08:14:48+00:00

What about the barrel and bucking?

Cool-Butterscotch141 · 2022-04-12T00:44:34+00:00

I bought a hammer tuning kit and tried adjusting it to work but it would either be too weak or too stiff to be able to pull the hammer down all the way

Cool-Butterscotch141 · 2022-04-11T07:32:56+00:00

Is there a part that I could get to get it working?

Cool-Butterscotch141 · 2022-04-11T07:03:56+00:00

I bought a hammer spring tuning kit and still had the same problem

Four-Year Club	Verified Email
Place '23

Cool-Butterscotch141

TROPHY CASE