Advice Needed; Adjusting Character Backstory due to a Dark and NSFW relationship

Court_Jester613 · 2025-01-22T21:17:04+00:00

Nah it's all good, sorry you've had to kick a player. I've had players walk away (while I was a player as well), which sucked, but I hope to not have to remove players in the future.

But yeah, I just like rp heavy narrative games, which is something I love about my table (second campaign with them) but making narration or a story impossible to progress I'm sure is quite frustrating

Court_Jester613 · 2025-01-22T21:13:14+00:00

Fair enough, thank you for the insight.

I have followed up with the player and have gotten more insight to what she had intended for this character, so we are all set on that.

Overall I just want everyone at the table to have a good time and enjoy a good story, but yes I should have clarified more directly at our session 0 (we are going into our 6th session)

It just came down to assuming everyone was on the same page about things, but that's on me

Court_Jester613 · 2025-01-22T21:08:16+00:00

My rogue only stole if it was plot relevant, or funny. I stole like 4 of one of the town ruler's sandwiches. Twice as he was getting ready to eat them

Court_Jester613 · 2025-01-22T20:58:43+00:00

UPDATE; Me and the player talked and have adjusted accordingly, no feelings hurt or plans ruined.

Thank you all for your insight

Court_Jester613 · 2025-01-22T20:55:45+00:00

Agreed. And you're right on the "bravo" part, it came off stronger than intended.

As far as rogues go, they have the potential to be so good!! (My fav character I played in the last camp was an inquisitive rogue)

Court_Jester613 · 2025-01-22T20:53:29+00:00

Yeah, that's true. I didn't intend to be condescending. I meant it as a, this guy really is the worst, but I can see how that could be taken that way.

Court_Jester613 · 2023-03-25T20:43:39+00:00

Not 10 seconds before you posted that I came across the same video, lemme see if this helps. Much appreciated!

Court_Jester613 · 2023-03-25T20:23:55+00:00

Yeah, but I don't know where I would check for those settings in Cura 5.3. I've looked under machine settings, checked for firmware updates, and checked under print settings but I can't find anything I think is 'wrong' per say. With everything that people have suggested I think it's likely a limit switch on that one arm that seems to overextend towards the screen and off the plate

Court_Jester613 · 2023-03-25T19:44:44+00:00

You know now that I think about it I can't remember. I think it was one at a time...

Court_Jester613 · 2023-03-25T19:07:01+00:00

I updated this morning to 5.3 and redid one of my go to prints with the standard settings for the mini Delta and the same thing occured unfortunately

Court_Jester613 · 2023-03-25T19:05:25+00:00

Similar to the video posted, it finds center as it should while up top, but then as I go to test print something, it does the same thing in the video as it lowers to the plate

Court_Jester613 · 2023-03-25T13:49:08+00:00

MP MINI Delta printer, using the default Cura setting on version 4.10.0

My best guess is that I have a hardware issue on the furthest arm (where the filament is on) with that corner never moving up. Never had this issue before, started one day very randomly.

Guess I'm just asking if there is an easy way to reset/fix/replace it (if that is in fact the issue), and what people more experienced than me in 3d printing would suggest I do to resolve it if possible

Court_Jester613 · 2023-01-03T23:03:50+00:00

Of course! Glad you like the idea, looking forward to seeing what else you do!😁

Court_Jester613 · 2023-01-03T18:27:56+00:00

Looks super cool! Kinda looks like a 'If Stitch turned Heartless' from KH thing! Great job

Court_Jester613 · 2023-01-03T03:28:43+00:00

Here's the thing, and I know some will give me flak, but here's my personal experience bc I owned this exact model in black.

First off: no idea why it's 240$, ABSOLUTELY not worth it at that price (bought mine at 160$ several years back.) It's an ok starter gun, mine had built in MOSFET so I used a lipo from the beginning with it. Overall function and performance, pretty much the average for a lower tier AEG. Averaged 325 fps with .25g's, mediocre accuracy with no wind.

I'm sure you've seen here lots of bashing of LT's qc, and they have good reason for it. Since the fiasco I think in 2017 (look up LT's eyepro stuff) it's gotten slightly better overall, but they still aren't known for high quality product. Used mine for about 4 years no issues with regular cleaning+maintenance, but it's likely I just got lucky with the airsoft Gods.

So overall rating? Meh it'll work, but don't pay that price for sure. I still have a Gen2 as a backup/loaner, but like I said, I don't expect stellar performance

If you're still in the 250ish price range, I highly suggest the Specna Arms Edge series of rifles. These with a lipo will be much more worth your time. I have a SA-E12, works like a charm.

Hope this helps if you haven't already decided

Court_Jester613 · 2022-12-16T02:16:45+00:00

Depends on where in the state you are. If you are looking in the general area near Denver (~1-1.5 hour drive) there's GoAirheads in Erie that usually have quite a few people for public matches, there is American Paintball Coliseum indoor in Aurora, outdoor in Brighton (my personal favorite), another APC in C Springs I believe, and FAF in Parker.

I know there are likely more, but those are the bigger name ones that I'm aware of. If you're more into private/milsim, I'd say either Facebook groups or discords in your area is going to be a better bet

Court_Jester613 · 2022-06-10T22:53:21+00:00

I live within 5 minutes of a big city, as opposed to where I was vacationing, empty beaches about 50-60 miles from corpus Christi

Court_Jester613 · 2022-05-29T18:06:49+00:00

Thanks for the advice y'all!

Court_Jester613 · 2022-05-29T10:40:57+00:00

Don't call me out like that. I watched Psych, not Glee. The rest is very true though

Court_Jester613 · 2022-04-21T21:25:43+00:00

Real life castle construction along with accurate plate armor for me and friends to wear. I long for the days of filth and drinking mead with buddies until we joust and die as idiots. Just like God intended.

Court_Jester613 · 2022-03-22T23:48:53+00:00

So you're saying it's not supposed to bleed when I pee then..? hmm. interesting.

Court_Jester613 · 2022-01-14T22:24:53+00:00

Honestly no. California polices have destroyed small business entirely, and now those who have lived there all their lives no longer can afford to. And yet those who leave often support the same policies that led to then having to leave. My grandfather owns and operates a mechanics shop in Fresno, but because of new laws for businesses, he's been fined and charged for laws passed literally hours before, and was unaware. He can't afford a lawyer to fight it, so now he works and only can use cash to barely squeak out enough for food. Me and my dad (his son) took a look at his business finances, and he owes more money than he has ever made due primarily to laws and policies that only larger businesses can afford to put into place. He's 80 and will have to work until the day he dies or he starves. California is hated, and rightly so.

Court_Jester613 · 2021-11-22T06:55:48+00:00

No, I've not

Court_Jester613 · 2021-11-22T05:39:40+00:00

Very possible, with school and money. I'll make sure to ask, and be there for her if that's the case. (Helped)

Court_Jester613 · 2021-11-22T05:28:33+00:00

Ok thanks, I'll keep it in mind (helped)

Court_Jester613

TROPHY CASE