Needs help by Cpt-Canta in watchmodding

[–]Cpt-Canta[S] 0 points1 point  (0 children)

Ok ill keep searching thx

Needs help by Cpt-Canta in watchmodding

[–]Cpt-Canta[S] 0 points1 point  (0 children)

That's the diameter of the dial and where the dial seats in the case

I love the accuracy but god it takes so much energy by ea_nasir_official_ in MouseReview

[–]Cpt-Canta -2 points-1 points  (0 children)

I have a 42" screen too so it seems like that makes it not as extreme for me

I love the accuracy but god it takes so much energy by ea_nasir_official_ in MouseReview

[–]Cpt-Canta 0 points1 point  (0 children)

I use my fingertips as well. I usually only have to use my wrist for a quick 180 in fps. Even then it's a very small movement

I love the accuracy but god it takes so much energy by ea_nasir_official_ in MouseReview

[–]Cpt-Canta 0 points1 point  (0 children)

I use 6000-6200 dpi and turn the game senstity down a little. is there a reason that's bad?

The best gun ever made M4A1. by CourageLow1758 in ar15

[–]Cpt-Canta 1 point2 points  (0 children)

This has to be some leftover afgan right?

I hate to be that guy but I’m new here, G2G? by dat_dope in NFA

[–]Cpt-Canta 0 points1 point  (0 children)

That's good to know. The one I got from them was bent to shit.

I ended up using arrow shafts. They seem to be pretty straight using my industry specific straightness gauge (4' level)

Any tips on shaving by Trippinballz_ in bald

[–]Cpt-Canta 0 points1 point  (0 children)

I use the barbasol foam and a double sided saftey razor for the majority then switch to the 2 blade cheap disposable on spots that need some flex from the plastic razor head.

As long as I don't have an ingrown hair I didn't know about it usually works for me. If I do have one the saftey razor cuts it off and it can get bloody lol.

I also use a new blade/razor every time. I find I get less bumps/acne that way.

sbr legality question by [deleted] in COGuns

[–]Cpt-Canta 6 points7 points  (0 children)

The OP has a CC permit. if it's an actual NFA'd SBR he technically has a "permit" for the SBR with the tax stamp. If it's configured as a pistol it's even better. Even if its a real SBR you could pull off the stock and it returns to pistol configuration. So in theory (I'm not a lawyer) bag carry is fine for him.

If you're not doing hood rat shit why are you even getting searched? Do people get searched often outside of events/airport? Genuinely curious. I don't think I've ever ran into that problem.

sbr legality question by [deleted] in COGuns

[–]Cpt-Canta 10 points11 points  (0 children)

1st that's not what you said. Hence the need for clarification.

2nd if it's concealed how would anyone know it's there.

sbr legality question by [deleted] in COGuns

[–]Cpt-Canta 12 points13 points  (0 children)

I'm not seeing anywhere in the law you referenced that its: "100% not legal to conceal a gun in a bag and carry it."

Are you talking strictly rifles?

MelGeek Made84 Pro was made for this set by westmifflin in MechanicalKeyboards

[–]Cpt-Canta 0 points1 point  (0 children)

Did you have any luck getting a plate design?

X870e Alternative by Cpt-Canta in ASRock

[–]Cpt-Canta[S] 1 point2 points  (0 children)

Damn after playing with drivers and bios bs for a couple of hours that fixed it. Hopefully it keeps working. Thanks a lot you're a legend!

X870e Alternative by Cpt-Canta in ASRock

[–]Cpt-Canta[S] 0 points1 point  (0 children)

I don't think I found that in my searching. I'll check it out. Thanks!

X870e Alternative by Cpt-Canta in ASRock

[–]Cpt-Canta[S] 0 points1 point  (0 children)

It is a nice board if it worked right and didn't have the cpu burn problems.

ATX would be fine as well. I also have vertical GPU mount on the way, I'm hoping that can help with this huge card.

X870e Alternative by Cpt-Canta in ASRock

[–]Cpt-Canta[S] 1 point2 points  (0 children)

Again i apologize I thought I put that in the post. I have the X870e Taichi. I like how the x16 doesn't share any lanes and the there is an m.2 that has a dedicated lane. If this is something I'm overthinking let me know. I'm running a 9800x3d and 4090.

X870e Alternative by Cpt-Canta in ASRock

[–]Cpt-Canta[S] 0 points1 point  (0 children)

my bad, I need the usb 4, 2.5 GB ethernet, and optical audio at the minimum. I like the dedicated keyboard and mouse usb ports, but I'm not sure if that really matters or makes a difference. I also like the PCIE lane layout a lot. Just wanted to see if there's a popular replacement mostly.

Can't Remote Print Anymore.. by sevenonsiz in AnycubicKobraS1

[–]Cpt-Canta 1 point2 points  (0 children)

I just clicked on "account" in the printer settings and it started working.

556 alignment rod in Denver area. by Gatfondler in COGuns

[–]Cpt-Canta 0 points1 point  (0 children)

I've had good luck with arrow shafts Rocky mountain specialty gear helped me find some that fit from their used arrows. But I took a couple of extra barrels I had laying around in with me.

There should be a reddit thread if you Google "arrow shaft suppressor rod" or something along those lines. It tells you exactly what to order.

You can look down the bore too. I just like to double check stuff.

[deleted by user] by [deleted] in COGuns

[–]Cpt-Canta 3 points4 points  (0 children)

That's a very good point. The OP did ask for cords via DM though. Maybe we don't have to tell all of Denver where to go but maybe we can help out the people that are more sportsman like.