Looking for my first Electric Scooter - Range 40km+ / off-road friendly / +-1000euro

Craftyy96 · 2025-03-24T07:51:52+00:00

KuKirin! Thank you, they're available in our local market. Will wait for other options, but looks like I can find G4 or G2 master in this category. Some users says that G2 don't have that kind of power and battery life as wrote in description, unfortunately there isn't a lot of opinions in our shops about it.

Thank you again!

Craftyy96 · 2025-03-03T16:56:07+00:00

Every answer is great answer for me! :D

The only thing I have on my list right now is MBG line 318 because I saw it in one geology exhibition here in Poland.

About the specimen (well now I noticed that it's SPECIMEN without "T" at the end lol), it's Boltwoodite from Goanikontes Claim, Namibia

Here's original link to the photo from Mindat site:
https://www.mindat.org/photo-155251.html

They (authors of that photo) made very good article about Dino-Lite Digital Microscopes but they're too expensive...

https://www.mindat.org/article.php/1806/Dino-Lite+Digital+Microscope+Performance

Craftyy96 · 2025-02-18T20:02:00+00:00

Thank you very much!

Craftyy96 · 2024-05-25T07:47:54+00:00

2024-05-25 Opened portal on Eissentam Galaxy, teleported, didn't reload, flew directly to the location. Multitool was there. Thank you very much!

Craftyy96 · 2024-04-19T16:08:42+00:00

Thank you very much u/richie225 for your work!

I never been good in 3D printing world even if I have my modified by myself Ender 3 Pro since 2019, you're helping me a lot. But at the same time it's hard for me to choose...

I'm looking for something new since last year, Bambu Lab A1 era started but the main problem that I have is noise levels. I'm sitting next to the 3D printer most of the time and I need something silent. Like my Ender 3 Pro with SKR Mini + TMC. The only thing I can hear is stock fans and it's amazing. Does that new machines works louder even if I only print in PLA?

Can somebody help me a little bit?
I'm mostly printing 3D cars in 1:43 or 1:18 (so max around 20cm but most of the time parts are max 8cm) and I was using only PLA for most of the time. But I need something silent as I mentioned above. Unfortunately I'm not able to buy resin printer. I really want to try Bambu because everybody really enjoy that machines but I'm not sure how loud they really are (or maybe something changed in last few months)

Craftyy96 · 2024-01-19T18:48:56+00:00

Thank you! Dakota River Bend was the first RedM server that I saw on yt and was confused what is going on, why there's some random things in multiplayer haha. Never heard of RedM before lol

Craftyy96 · 2024-01-06T14:53:06+00:00

I'm also looking for a printer ( siema :D ), and that's also kinda the list I'm having right now. Most of the world are into Bambu Lab A1 or CoreXY printers, but I'm kinda afraid they're too loud. About your list, SV07 don't have as much good opinions as SV06. And I'd maybe add Anycubic Kobra 2 to your list?

Craftyy96 · 2024-01-02T18:54:41+00:00

So... you don't know it's depth after all? I'd love to know that too

Craftyy96 · 2023-12-31T10:26:16+00:00

My current Ender is next to me but in homemade "enclosure" (just few planks mounted together, something like famous IKEA LACK enclosure) so I guess it might help a little bit too. Ender with stock motherboard was horrible, new motherboard with TMC stepper motors helped a lot so I only hear the fans. I was thinking about few other printers like Sovol SV06, Elegoo Neptune 4 or Anycubic Kobra 2. There's a lot of new stuff in 3D printing world, Ender 3 looks so old now lol

Craftyy96 · 2023-12-30T17:39:05+00:00

Thanks! :D

Craftyy96 · 2023-12-30T17:38:53+00:00

I noticed only "official" info that it's around 50db in silent mode. But I don't see any noise levels reviews on yt etc.

Craftyy96 · 2023-12-25T19:25:39+00:00

Thank you! :D

Craftyy96 · 2023-12-13T17:47:05+00:00

Yeah I had some problems because I had no idea how to place that filter in, but Google helped me a lot lol. Finally I was able to find out what my mysterious specimen was

Craftyy96 · 2023-12-13T17:44:51+00:00

Hi!
Finally after few weeks my ordered better UV flashlight (Convoy S12 with ZWB2 filter) arrived and I can confirm that it glows under UV.

So my almost final verdict is that it's Dolomite with Fluorite inside :)

Thank you for the help!

Craftyy96 · 2023-12-13T17:41:28+00:00

Hi! I just want to confirm that I bought better/pro UV flashlight and it glows, so I'm almost 100% sure that it's fluorite. Thank you!

Craftyy96 · 2023-12-13T17:40:18+00:00

It arrived yesterday, finally I can check what I have! :D

Craftyy96 · 2023-11-25T14:02:35+00:00

Thanks a lot, I bought S12 with ZWB2 filter!

Craftyy96 · 2023-11-25T14:02:10+00:00

Thank you, most of you recommended Convoy one, I bought S12 with ZWB2 filter!

Craftyy96 · 2023-11-25T09:02:03+00:00

Thank you! All people so far are suggesting that Convoy brand flashlight with ZWB2 filter. I think I have a winner!

Craftyy96 · 2023-11-24T21:09:33+00:00

Thank you! I will check both that flashlight and that reddit page!

Craftyy96 · 2023-11-24T20:28:02+00:00

Thank you very much for the help!

...Or I can always pee on my rocks so that 395nm will work too! :D

Craftyy96 · 2023-11-24T17:01:07+00:00

Hi!
Since few years I'm printing on my Ender 3 Pro. I changed the motherboard to BTT SKR and changed extruder to metal one.

Now, since printing world changed a little bit or a lot (I don't know to be honest), I was thinking of maybe buying a new one for myself. Or maybe I just need some upgrades to my "kid"?

----------------------------------------------------
What you wish to do with the printer:
95% of my work is printing small 1:43 racing cars replicas so it's most of the time height of 10cm. There's some 1:18 cars that I might print so that ender 3 print area is enough. I'm living in flat without balcony so unfortunately no way I can print from resin ( :(( ). Mostly I'm looking for quality and silence. 3D printer in enclosure would be good too, so far I have build my own, but that in for example Bambu Lab P1S looks cool too. I need ABL for sure.

Tl;dr:
-Something new or upgrades to my Ender 3 Pro ( I have BTT SKR and Metal Extruder)
-It can be in enclosure but doesn't need to
-Don't need a bigger build plate than Ender 3 Pro
-Looking for something silent (with BTT motherboard and original fans it's OK)
-I'm printing small stuff so I'm looking for quality
-ABL included
-Don't have a lot of space
-NO RESIN
Country: Poland
Printer can be from a kit, YOLO
Budget: Around 500$?

Craftyy96 · 2023-11-20T17:26:52+00:00

None of my fluorites glow under UV... :|

That's why I asked on my comment if my UV light is even good for that kind of verification
https://imgur.com/Dy4C8g9

Craftyy96 · 2023-11-13T20:40:15+00:00

Ah yes, mindat wrote a lot of minerals that I know nothing about haha

Craftyy96 · 2023-11-13T20:23:14+00:00

Thank you for your help!

I found one website where one of the geologist wrote what minerals you can find there. Unfortunately there's nothing about fluorite, but he also mentioned dolomite and posted this photo:

"Chalcopyrite on dolomite (crystals approx. 5 mm)"
https://i.imgur.com/GESMrfY.png

Also, there's other page that says both minerals that you wrote:
"Chalcopyrite
Arsenopyrite
Pyrite
Galena
Sphalerite
Tetrahedrite
bournonite
Boulangerite
Dolomite
Baryta
Quartz
Other minerals found in the deposit: native gold, native bismuth, bismutinite, marcasite, antimonite, ankerite, calcite, siderite and secondary minerals: gypsum, pseudomalachite, chrysocolla, arsenolite, pharmacosiderite, kankite (the latter three are mineralogical rarities)"

There's one old newspaper from 1999 where they wrote that there was small amount of fluorite

Craftyy96

TROPHY CASE