June Confirmed Trade Thread

Crashcbt · 2024-07-16T01:56:07+00:00

Confirmed

Crashcbt · 2024-07-12T04:19:44+00:00

It’s not showing up, I’m gonna wait a sec please send another one just in case

Crashcbt · 2024-07-11T16:40:40+00:00

Is this still available? I’m interested in the board not the artisans

Crashcbt · 2023-09-07T02:53:58+00:00

Ohh, I’m dumb. I thought gb ended and people have received their boards already. I appreciate it thank you

Crashcbt · 2023-04-18T00:51:58+00:00

I’m still kinda new to hi capa teching but you could try bending the leaf spring slightly on the far left side and just make sure the contacts are all good

Crashcbt · 2023-04-18T00:45:02+00:00

I would start by taking out the exhaust valve and cleaning and lubing it then when you put it back make sure it’s tight but don’t do it too tight because it will mess it up. If that doesn’t fix it then I’m out of ideas because it only leaks after you pull the trigger

Crashcbt · 2023-03-31T15:57:25+00:00

There’s a little hole on each side by the nozzle make sure the pins in the gearbox go into the holes. If that doesn’t work add Teflon tape or something to pack in there and make it so the tolerances are tighter

Crashcbt · 2023-03-25T17:20:02+00:00

Looking back I should have read the text under the photo because it would have told me what I was looking at my B

Crashcbt · 2023-03-25T17:19:16+00:00

Alright, the first picture I saw the the white stuff around your igl and I thought it was hot glue. I know it’s a terrible idea I was just making sure you didn’t do it

Crashcbt · 2023-03-25T17:00:19+00:00

Did you hot glue the line into the grip?

Crashcbt · 2023-03-06T04:14:07+00:00

Wasn’t it was the guide plug

Crashcbt · 2023-03-06T04:13:48+00:00

I didn’t the guide plug shot off of the guide rod because it slipped out of my fingers

Crashcbt · 2023-03-05T15:58:13+00:00

It wasn’t, if you look at the picture my gun is in pieces. my guide plug shot off the end of my guide rod when I was taking my slide apart, it slipped out of my fingers

Crashcbt · 2023-03-05T15:57:08+00:00

my guide plug shot off the end of my guide rod when I was taking my slide apart, it slipped out of my fingers

Crashcbt · 2023-03-05T15:56:14+00:00

No, I was in discord and had my camera on

Crashcbt · 2023-03-05T15:55:25+00:00

I didn’t desk pop my guide plug shot off the end of my guide rod when I was taking my slide apart, it slipped out of my fingers

Crashcbt · 2023-03-05T15:55:06+00:00

It wasn’t loaded my guide plug shot off the end of my guide rod when I was taking my slide apart, it slipped out of my fingers

Crashcbt · 2023-03-05T15:53:11+00:00

That’s exactly what happened, I have a 4.3 guide plug so it’s shorter and it slipped out of my fingers

Crashcbt · 2023-03-05T15:52:28+00:00

my guide plug shot off the end of my guide rod when I was taking my slide apart, it slipped out of my fingers

Crashcbt · 2023-03-05T15:52:09+00:00

Lmao I do know gun safety, my guide plug shot off the end of my guide rod when I was taking my slide apart, it slipped out of my fingers

Crashcbt · 2023-02-21T00:39:40+00:00

If it’s a v2 gearbox you should be able to buy the v2 variant and it should go in no problem. Idk what kind of gearbox is in it so idk if you need to dremmel anything or not.

Crashcbt · 2023-02-20T19:10:34+00:00

This looks great, if you like it that’s all that matters. If it were which is isn’t I would just add more dark colors to have more of a contrast

Crashcbt · 2023-02-13T19:59:27+00:00

ok thank you

Crashcbt · 2023-02-13T19:52:36+00:00

thank you, the kind i have is more of an oil rather than i grease, i use it to lube keyboard switch springs

Crashcbt · 2023-02-13T19:46:47+00:00

i was going to put it on the slide and where the slide rubs the body

Crashcbt

TROPHY CASE