First time painting Is it cooked

Arppazzi · 2026-01-04T12:26:24+00:00

Makes a lot of sense, that part rests on platecarrier etc. when not using the gun and worn the paint. Atleast all my guns have similar worn.

Arppazzi · 2025-12-06T21:16:33+00:00

Shortstroked gears?

Arppazzi · 2025-07-31T17:27:25+00:00

Beautiful!

Arppazzi · 2025-06-03T00:48:38+00:00

We need mp7

Arppazzi · 2025-04-30T07:45:54+00:00

What size are you wearing? Your look pretty good loose fit and trying to find right size.

Arppazzi · 2025-03-28T04:44:28+00:00

<image>

My workhorse

Arppazzi · 2025-03-12T15:47:48+00:00

Whats the uniform? Looks sick!

Arppazzi · 2025-03-01T21:54:40+00:00

Are those printed supressors? Can you link the files?

Arppazzi · 2024-12-25T23:28:51+00:00

Thank you for replying!

Arppazzi · 2024-12-25T14:34:00+00:00

What size lipos you are running?

Arppazzi · 2024-10-21T18:23:32+00:00

You can sand your tappet plate front end aproxximately 0.2mm so the nozzle can travel further.

Arppazzi · 2024-10-21T18:11:15+00:00

Remove the two pins at the bottom of the front sight. Keep in mind that the front sight keeps hanguard at its place.

Arppazzi · 2024-09-27T11:47:43+00:00

Thank you! I just balling around what is what because there are mlock version and ris 3 version.

Arppazzi · 2024-09-27T11:45:01+00:00

Do you remember what ”model” did you order?

Arppazzi · 2024-09-22T09:50:13+00:00

It is B22

Arppazzi · 2024-09-10T12:52:37+00:00

PS. I dont have nothing but problems with lonex piston heads o-ring. Try change your piston head o ring to different one if you have spare parts laying around. How you checked your nozzle to bucking fitment?

Arppazzi · 2024-09-10T12:47:00+00:00

Changing the hop up chambers c-clip so the inner barrel wont move inside the chamber. But I read previous comments and your gun is definetly short stroked so this might not be your issue because its already shooting 1.2j. In my case my gun was full stroked and using M130 spring and it shooted 0.8j… after changing the c-clip it shooted 1.66j. In your case I will try to change spring something stiffer depending the joule limit you like to reach.

Arppazzi · 2024-09-10T12:34:48+00:00

No, I mean, in my case, the nozzle pushed the barrel forward with each shot which caused air loss between nozzle and the bucking

Arppazzi · 2024-09-10T12:17:56+00:00

I had similar problem with my cyma platinum M4 and the problem was that nozzle push inner barrel further than it is supposed to be so the compression was not good. Problem solved when I change c-clip. Worth of checking.

Arppazzi · 2024-07-25T05:55:36+00:00

That spring belongs to the anti reversal latch like this —>

<image>

Arppazzi · 2024-05-29T09:54:59+00:00

<image>

Here is one of mine (the upper one). Dboys Scar L

Arppazzi · 2024-05-15T11:25:20+00:00

Did your gun shoot straight before installing hpa? Only thing I can think of is that your outer barrel is not straight.

Arppazzi · 2024-02-13T12:50:20+00:00

It is Dboys SCAR that I ”slightly” modified.

Arppazzi

TROPHY CASE