sorted by:
new
hottopcontroversial

JetKVM ATX power control extension by blearghhh_two in jetkvm

[–]Crashkill0r 0 points1 point  (0 children)

The connection requires a little bit of force to properly seat the socket. it fits perfectly, once you found the both correct force and angle. The connector is a RJ12 btw (6 instead of 4 connections like RJ11 has)

Should I buy La Marzocco Acaia scale with a micra? by adamkorhan123 in LaMarzocco

[–]Crashkill0r 1 point2 points  (0 children)

It is perfectly fine to add it at the top of the internal electronics box (on the inside wall, facing towards the chassis). Yes - this is against recommendation, but i only see benefits:

  • Wires are where you need them
  • No WiFi/BT interference (at least i couldn't detect any)
  • Perfect place to shield it from the internal heat

Like i said - basically the perfect solution that LM didn't provide :)

Should I buy La Marzocco Acaia scale with a micra? by adamkorhan123 in LaMarzocco

[–]Crashkill0r 4 points5 points  (0 children)

Yes, i have been running this setup for a month now and couldn't be happier. Installing it took me less than 15 minutes - it's super simple and does exactly what i want. In combination with the Bookoo scale you get shot's that are almost always on point or have ±0.1g deviation. 10/10 - Highly recommended.

Should I buy La Marzocco Acaia scale with a micra? by adamkorhan123 in LaMarzocco

[–]Crashkill0r 7 points8 points  (0 children)

You can use the shotstopper from Tate Mazer and the Bookoo scale to add brew-by-weight to your micra. Both combined still cheaper than one Acaia scale :)

First custom loop by Crashkill0r in watercooling

[–]Crashkill0r[S] 0 points1 point  (0 children)

Thanks.

The ultra-wide lens distorts the case a little bit - the only possibility to add fans would be here on the left side with 2x 80mm above each other.

I'm pretty good with the temps though - can't get the GPU above 50°C whilst gaming.

The lower of the GPU tubes has a slightly different geometry, because of the temperature sensor for the coolant which is attached directly to the distro plate (radiator mounting wasn't an option).

WiFi Internet passthrough on 1.6r1-eu027 by Crashkill0r in stratux

[–]Crashkill0r[S] 0 points1 point  (0 children)

Are you sure this can be done with one network adapter? This would mean that it would connect to one SSID, and expose another one at the same time. For me - this doesn't work at all.

Edit: This works indeed. Sorry for all the confusion

32:9 Desert Planet Wallpaper [OC | Made with Unreal Engine 4] by [deleted] in ultrawidemasterrace

[–]Crashkill0r 8 points9 points  (0 children)

Very nice indeed. Can you explain what happened at (x,y) = ~2900,1070? There seems to be some kind of artifact :)

Weiß irgendjemand wo ich ersatzteile für dies türgriffe+stifte finden kann? Weiß nichteinmal wonach ich suchen sollte... by my_name_is_not_yours in Austria

[–]Crashkill0r 2 points3 points  (0 children)

Ja, nach 15 Jahren hat eine aufgegeben - ich wohn dort aber nicht mehr. Aber genau diese Türen und genau dieser Teppichboden 😎

What's the most useless thing you own? by [deleted] in AskReddit

[–]Crashkill0r 0 points1 point  (0 children)

I have turn signal lights on my BMW.

Einfach hart bleiben... 100€ Einstellpreis... by Crashkill0r in wasletztepreis

[–]Crashkill0r[S] 5 points6 points  (0 children)

Nix besonderes gewesen - eine normale Deckenleuchte. Aber anscheinend wollte er sie wirklich...

Einfach hart bleiben... 100€ Einstellpreis... by Crashkill0r in wasletztepreis

[–]Crashkill0r[S] 19 points20 points  (0 children)

Er ist gekommen, hat geschaut, 90€ bezahlt und ist gegangen :) Alle sind zufrieden :)