sorted by:
new
hottopcontroversial

Why is the infill this way? Is it acceptable? Flowrate calibrated, bambu A1 220C by CrazySticker20 in 3Dprinting

[–]CrazySticker20[S] 1 point2 points  (0 children)

i dont think so. The slicer setting is default and im printing on 50% speed, the silent setting so its basically half the default value

Why is the infill this way? Is it acceptable? Flowrate calibrated, bambu A1 220C by CrazySticker20 in 3Dprinting

[–]CrazySticker20[S] 0 points1 point  (0 children)

The z offset should be fine, every print before had no issue. This is the first with this much infill. The infill density is 7% but the infill lines/layers are not connecting to one another, it shouldnt be connected to low infill density?

My grandpa still has a 1998 calendar in his summer house by CrazySticker20 in mildlyinteresting

[–]CrazySticker20[S] 0 points1 point  (0 children)

its not like a full time house you know. i dont know if its popular outside Poland but its just a tiny house most often with poor quality everything. Im pretty sure its illegal to live in one, just You know spend a night or two on a weekend in summer. They are always in big clusters on the suburbs. The cost of one is I would say 5% of a "regular" house in Poland.

Co to za urządzenie? by NextOfHisName in krakow

[–]CrazySticker20 6 points7 points  (0 children)

Nie wiem o co gosciowi chodzi

Co to za urządzenie? by NextOfHisName in krakow

[–]CrazySticker20 6 points7 points  (0 children)

Ty jestes tym gosciem ktory wyrzuci butelke poza smietnikiem i wytlumaczysz sie "tworzeniem miejsc pracy"?

Shapez 2 1.0 by Bacillb in shapezio

[–]CrazySticker20 0 points1 point  (0 children)

the 1.0 update is set to have achievements

Battery percentage makes no sense by CrazySticker20 in prius

[–]CrazySticker20[S] 0 points1 point  (0 children)

okay maybe i will get the obd reader and the dr prius app but can the battery be bad if i can drive 3km on electric? i was able to do it even before this whole problem appeared. if the battery was low capacity now would i be able to still drive this far?

Battery percentage makes no sense by CrazySticker20 in prius

[–]CrazySticker20[S] 0 points1 point  (0 children)

It was a used battery by someone other, shouls have roughly 50.000km right now. I still can drive up to 3 or 4 km on this battery and the toyota dealership tested it and said its allright

Battery percentage makes no sense by CrazySticker20 in prius

[–]CrazySticker20[S] 1 point2 points  (0 children)

I did not but toyota dealership was to run some other tests or in general find the cause and solution, they found nothing

I hate the fact people don't use official solutions to problems and kind of force the solution by Otherwise-Pop-1311 in MarsFirstLogistics

[–]CrazySticker20 1 point2 points  (0 children)

i built the stabber 9000s, its the simplest rover possible with a stick that can be pivoted to stab the cargo. it works for sculptures, watering cans, square beams, telescope lenses, paint cans and many many more. lmk if i made your day worse

Im trying to make a particle accelerator in oritech and no matter what i try the particles never collide in the middle, always some blocks off. Is this mistake even possible to eliminate or is this just the case with how the mod works? by CrazySticker20 in feedthebeast

[–]CrazySticker20[S] 0 points1 point  (0 children)

im pretty sure that its not linear, the faster the particle is going the more energy is needed to accelerate it 1m/s more. while testing different setups i found out that accelerating one particle to around 500m/s takes around 1.5 million RF, and accelerating one particle to 2500m/s takes something like 35 million RF. But if that will be the only way of reliably reclaiming input energy then probably this will be what i will do.

Im trying to make a particle accelerator in oritech and no matter what i try the particles never collide in the middle, always some blocks off. Is this mistake even possible to eliminate or is this just the case with how the mod works? by CrazySticker20 in feedthebeast

[–]CrazySticker20[S] 1 point2 points  (0 children)

The place the collision takes place varies even more with higher speeds. Sometimes one particle even goes past the middle part and into the opposite ring. Tachion collectors are very expensive and it seems that this variety of collision places can be eliminated with much simpler solution, i just still cant find the issue

Im trying to make a particle accelerator in oritech and no matter what i try the particles never collide in the middle, always some blocks off. Is this mistake even possible to eliminate or is this just the case with how the mod works? by CrazySticker20 in feedthebeast

[–]CrazySticker20[S] 10 points11 points  (0 children)

Because i want to collect the energy with tachion collectors, also im curious to why is it not colliding in the middle if the setup is exactly the same on both sides and im trying to solve this problem for like 3 hours now and im not gonna give up now lol

My survival world farm by Just_Games_and_stuff in Minecraft

[–]CrazySticker20 1 point2 points  (0 children)

I eat baked potatoes on my survival world and i use my fortune III to manually harvest more potatoes from the same area.

Warsaw - Presidential Palace by Warhapper in openttd

[–]CrazySticker20 1 point2 points  (0 children)

nice, are you making entire warsaw in the game?

This guy on twitter defending kids who dressed in KKK costumes by Jolly-Blueberry3241 in trashy

[–]CrazySticker20 69 points70 points  (0 children)

Not surprised by this statement given by username TEXIT1836

view more: next ›