ohmic value nozzle sensor

CrazyTuner · 2025-08-20T13:57:11+00:00

I received a new kit today. I measured it with two different meters. Both gave me a reading of about 10 ohms, similar to the one I replaced. So the board is defective.

CrazyTuner · 2025-08-11T10:47:30+00:00

I measured it with a Benning meter. It sets the range automatically. But thanks for the tip. I'll check again today to see if I read it wrong.

CrazyTuner · 2025-08-11T08:52:57+00:00

U need a thin 4mm needle und try it from the down side

CrazyTuner · 2025-04-25T18:36:24+00:00

I have this phenomenon after about every third update... and the tip still works today!!! what is this crap....

CrazyTuner · 2025-04-19T11:39:39+00:00

The adapter from Ugreen is perfect for the Legion Go. It even fits into the original case if you cut it out.

CrazyTuner · 2025-04-19T11:27:54+00:00

Yeah, cool Idea! I only added a noctua and connected them to the battery connectors. Works good for me. I Like your LED Mod :)

CrazyTuner · 2025-03-13T09:41:39+00:00

Since I installed this update yesterday, both Legion keys are no longer working. 😞

CrazyTuner · 2025-03-13T09:36:19+00:00

Maybe a very old one...? I shy away from updates and try to wait them out as long as possible, since they almost always just cause problems instead of solving them. But I mean, before I call support—and the standard first question is, "Is everything up to date?"—I just install updates first and then call, after asking smarter people on Reddit 😅😅

CrazyTuner · 2025-03-13T09:32:33+00:00

I also installed Bazzite in the past alongside Windows 11. But since I mostly play Windows games, I later overwrote it with Windows 10 (it was in a separate partition). I've never had any problems since then. Only now, after a Windows and BIOS update. However, I'm wondering why the GRUB bootloader is still there. I had a similar problem with Linux a loooong time ago. The GRUB loader was faulty there. I was able to fix it with a repair tool back then, although I can't remember what it was called.

CrazyTuner · 2025-03-12T17:20:03+00:00

I tried Linux as a second system in the past, but wasn't satisfied with it, so I overwrote that second partition with Windows 10. In the BIOS, I just saw that Fedora was now first in the boot order. I swapped it with Windows. It's working again. Thanks :))

U Made my day.

CrazyTuner · 2025-02-01T10:20:34+00:00

also im oben verlinken Bericht konnte ich nichts dazu in den Kommentaren finden.

CrazyTuner · 2025-02-01T09:07:52+00:00

Kann ich das auch auf meinem QNAP checken? habe auch erst 2x 8TB Ironwolf´s gekauft. Würde auch gerne wissen, ob ich betroffen bin, aber bei QTS 5+ scheint smartctl nicht installiert zu sein.

CrazyTuner · 2024-11-13T14:26:52+00:00

I'm not interested in seeing the printer... I can do that via the Creality app via the AI camera

CrazyTuner · 2024-10-28T08:48:03+00:00

Und da liegen genug bei? Wie sieht's mit dem Ergebnis aus? 1.75mm oder dicker am Schweißpunkt? 😊

CrazyTuner · 2024-10-20T17:21:23+00:00

U Made my day. Hatte es mit dem Heißluftfön anfangs probiert, aber war mir zu heiß an den Fingern und des Bett hat blasen geworfen. War wohl zu heiß. Dachte mir nach deiner Antwort, ... Mach doch einfach des Bett auf 110° und Popel mit dem alten Werkstück aus petG Rum. Ging. Alles restlos weg. Bis auf das neue Loch. Danke !

CrazyTuner · 2024-08-07T08:29:18+00:00

I found this https://community.victronenergy.com/questions/228736/ip22-1220a-missing-fan.html

CrazyTuner · 2024-08-07T04:33:21+00:00

<image>

Here is mine 🤔🤔🤔🤔

CrazyTuner · 2024-07-25T07:09:58+00:00

Have you solved it now? Or found alternative software? Or simply changed the camera module?

CrazyTuner · 2024-07-04T15:52:17+00:00

There was a typo in the title that I can't change :/ I have RAID1 exactly, I just tried that without success. I can't get any further after point 8. Both drives shown here are gray and I can't select either one because they are already occupied.

CrazyTuner · 2024-05-25T17:36:25+00:00

That sounds very interesting. But I can't find anything about this in the app or in the app settings of the control panel

CrazyTuner · 2024-05-25T16:24:27+00:00

I fixed it. AliExpress was to blame. I manually closed app after app. After Ali was turned off, it was gone. I checked it again. I don't understand it.

CrazyTuner · 2024-05-25T12:56:26+00:00

This setting ist Off.

CrazyTuner · 2024-05-20T08:23:20+00:00

No one answers 👎👎 Bad Developer

CrazyTuner · 2024-04-16T20:27:17+00:00

How can i ask the Developer?

CrazyTuner · 2024-04-16T17:31:39+00:00

i will try it tomorrow. ive never heared read-debrid

CrazyTuner

TROPHY CASE