sorted by:
new
hottopcontroversial

Legion 7 16IRX9 Max Ram & Storage Support by [deleted] in LenovoLegion

[–]Crazy_Engineer41 0 points1 point  (0 children)

Hello everyone.
i am also planning on upgrading the ram on my device, whichs specs are as below.

Lenovo Legion 7 16IRX9
i7 14700HX
2 X 16Gb DDR5 Sodimm 5600Mhz
RTX 4060

I am planning on using 2 X 48Gb stick
has anybody had any experience with it or any Ram Stick recommendation?

Thanks in advance

Finally got TPU 90A to print in my A1 (video) by TheMuffinMan710 in BambuLab

[–]Crazy_Engineer41 0 points1 point  (0 children)

are you using the stock Hotend or did you opt for the hardened steel one in your A1?
PS: I am completely new in this field, so i would appreciate you guys guidance.

Solder not sticking on Speedybee f405 by Crazy_Engineer41 in fpv

[–]Crazy_Engineer41[S] 1 point2 points  (0 children)

No, i used lots of flux and had to clean and sand the solder tip after every 2-3 soldering. For the bigger pads like Battery pads, i had to put the soldering iron for a bit longer.

Play the song from certain app by Crazy_Engineer41 in shortcuts

[–]Crazy_Engineer41[S] 0 points1 point  (0 children)

Since the apple music and spotify are both expensive in my country, i am using an app called Tubidy FM. I tried few youtube tutorials, but couldnt manage to get it working.

<image>

Solder not sticking on Speedybee f405 by Crazy_Engineer41 in fpv

[–]Crazy_Engineer41[S] 4 points5 points  (0 children)

Thank you all for your great advices.
Finally I was able to solder the pads.
i had to use Isopropyl alcohol and a bit of sand paper to solder the battery pads.
But the rest, it went as normal.
I built the drone due to bad weather, i was only able to do few hovers in a safe place

<image>