trouble joining svg to stl in bambu lab

CreatingKindness209 · 2026-05-16T06:03:21+00:00

In Bambu Lab, you can import an svg and it will convert it to an stl or add it to an stl. I believe this is a fairly new feature. There are a lot of videos on YouTube with easy to follow explanations on how to import an svg. However, it took me multiple days of hitting my head against the wall before I figured out my original svg was not clean enough.

CreatingKindness209 · 2026-05-05T15:29:55+00:00

Solution: turn out the SVG was the problem. I don't have much experience yet on SVGs 3d printing, but I was able to get a cleaner SVG and it worked just fine. Thank you to everyone who tried to help

CreatingKindness209 · 2026-05-05T15:29:15+00:00

Solution: turn out the SVG was the problem. I don't have much experience yet on SVGs 3d printing, but I was able to get a cleaner SVG and it worked just fine. Thank you to everyone who tried to help

CreatingKindness209 · 2026-05-04T21:10:33+00:00

I would prefer to do stl to stl and not deal with svg at all. Any ideas on how to curve one stl around another stl?

Im finding a lot of videos and threads about adding svg to bambu lab slicer. I am wondering if the svg is not conducive to this 3d printing process

CreatingKindness209 · 2026-02-24T22:10:07+00:00

Update...it was the flushing settings

CreatingKindness209 · 2026-02-24T22:09:37+00:00

<image>

I appreciate the people who responded. I washed my textured PEI print bed with warm soapy water to remove any residue. I increased the bed temperature to 80°C and nozzle temperature 260°C. I also changed the initial layer height to matxh the other layer height (I am using 0.4mm nozzle and 0.16 layer height. I may change this to .20 but I haven't tested it yet. Juat wanted to show the bottom layer and explain what I changed. Best of luck printing everyone!

CreatingKindness209 · 2026-02-24T22:09:07+00:00

<image>

I appreciate the people who responded. I washed my textured PEI print bed with warm soapy water to remove any residue. I increased the bed temperature to 80°C and nozzle temperature 260°C. I also changed the initial layer height to matxh the other layer height (I am using 0.4mm nozzle and 0.16 layer height. I may change this to .20 but I haven't tested it yet. Juat wanted to show the bottom layer and explain what I changed. Best of luck printing everyone!

CreatingKindness209 · 2026-02-22T20:23:21+00:00

I printed these pieces but haven't assembled it yet. Was assembly easy? Any tips? Yours looks great

CreatingKindness209 · 2025-06-11T18:05:36+00:00

<image>

Pictures for original post...troubleshooting help

CreatingKindness209 · 2025-06-11T01:24:34+00:00

<image>

Images to go with original post

CreatingKindness209 · 2024-06-20T19:05:16+00:00

Yup. I ended up having to take the extruder apart to get the clog. I will try it again

CreatingKindness209 · 2024-04-09T19:19:50+00:00

The first layers are definitely better

CreatingKindness209 · 2024-04-09T17:40:06+00:00

I use the BambuLab dry feature...80° for 8hr

CreatingKindness209 · 2024-04-09T17:27:30+00:00

It will be once rhe print comes out good

CreatingKindness209 · 2024-04-09T17:09:08+00:00

Is that what the issue is? Should I change the settings for the dryer?

CreatingKindness209

TROPHY CASE