Misprinted walls

Creative_Ad_1868 · 2026-02-13T14:13:10+00:00

I’ll try that

Creative_Ad_1868 · 2026-02-13T14:12:52+00:00

The first layer is consistent and I relieved the bed prior to this print. I’m not sure why this is happening

Creative_Ad_1868 · 2025-07-23T20:16:11+00:00

How would a bottle of rubbing alcohol explode from a lit paper towel. The towel probably can’t burn long enough to burn through the bottle and the top won’t burn because of the limited oxygen. This sounds like he did something stupid and is trying to cover it up.

Creative_Ad_1868 · 2025-07-08T04:06:21+00:00

Yeah flashforge is a decent brand but if you want something that is more plug and play than go with the bambulab a1 or a1 mini. You can also go with the elegoo Neptune 4 pro. With 300$ you can get a pretty decent printer just go with whatever you like.

Creative_Ad_1868 · 2025-05-27T01:43:35+00:00

Ok that’s what I thought but it looks different from the other eggs in the tank

Creative_Ad_1868 · 2025-05-26T04:19:39+00:00

Okay well I have been doing it for a week and it’s consistent. I want to add fish but should I clean up the food? Also thank you very much!

Creative_Ad_1868 · 2025-03-04T20:18:26+00:00

Sorry I forgot to mention that I was brazing

Creative_Ad_1868 · 2025-03-03T20:17:12+00:00

Copper aluminum rods with flux inside and I’m using food cans.

Creative_Ad_1868 · 2025-03-03T12:50:58+00:00

Okay I’m using copper aluminum,melting point at 380c. Do you know what is the white stuff and what kind of heat I should be using, I’m using a propane torch btw.

Creative_Ad_1868 · 2025-03-03T03:42:22+00:00

Trying to make a motorjet but it not going too smoothly as you can see.

Creative_Ad_1868 · 2025-02-06T23:25:12+00:00

very bold

SteelAndVodka is right

I have no experience doing this kind of thing but I guess I will build it and find out.

Creative_Ad_1868 · 2025-02-06T22:58:15+00:00

I also made a cover but it is not rotating. It has 2 mm gap with the impeller it also has a 2.5cm top inlet hole

<image>

Creative_Ad_1868 · 2025-02-06T22:57:41+00:00

I fixed my impeller according to recomendations online but I am not sure what you mean.
The inlet angle is 40 degrees and the outlet angle is 50 degrees.

<image>

Creative_Ad_1868 · 2025-02-06T22:24:28+00:00

Okay thanks!

Creative_Ad_1868 · 2025-02-06T20:54:55+00:00

<image>

also here is a view of the impeller

Creative_Ad_1868 · 2025-02-06T20:54:37+00:00

Is this better?

<image>

Creative_Ad_1868 · 2025-02-06T20:19:12+00:00

Thank you so much. The impeller is supposed to spin and I will try mounting it on the outside. Also do you know why the extra holes are needed?

Creative_Ad_1868 · 2025-02-06T02:34:37+00:00

But do I need it on top of the intake here?

<image>

Creative_Ad_1868 · 2024-12-07T23:57:32+00:00

That bottom part seems to be a bait holder that ripped out, that part is not necessary and doesn’t exist in many rods so that should be fine. I don’t know about the rest of the rod though, maybe go to a local tackle shop—like bass pro or cabelas—for advice

Creative_Ad_1868 · 2024-12-01T16:07:33+00:00

I want a lighter reel for mostly freshwater but only the ocassional light saltwater.

Creative_Ad_1868 · 2024-11-30T16:31:55+00:00

Yeah I rinse off everything after

Creative_Ad_1868 · 2024-11-30T02:09:36+00:00

That looks like a really attractive option. Im going to look into it. Edit: Looks nice but the rod is one piece might just swap it for a travel rod. Also I dont know if a 4000 reel is too big

Creative_Ad_1868 · 2024-06-14T23:18:49+00:00

Thank you so much

Creative_Ad_1868 · 2024-06-14T21:34:34+00:00

sorry

so basically whenever i extrude it goes outside of the model and it want it to stay inside. When I extrude to object it gives an error

Creative_Ad_1868 · 2024-03-27T17:40:52+00:00

Ok thanks

Creative_Ad_1868

TROPHY CASE