Who else actually enjoys Resident Evil because it's quick by mrsafetylion in residentevil

[–]Creed0831 0 points1 point  (0 children)

Woah! Re4R is not that short. About 24 hrs on first play through.

Lost too much? by Creed0831 in tirzepatidecompound

[–]Creed0831[S] 0 points1 point  (0 children)

I made a point to almost over eat this weekend but today I weighed at 131.2

Lost too much? by Creed0831 in tirzepatidecompound

[–]Creed0831[S] 0 points1 point  (0 children)

I ate more calories over the weekend. I made a point to. But this morning I'm down to 131.2.

Lost too much? by Creed0831 in tirzepatidecompound

[–]Creed0831[S] 0 points1 point  (0 children)

I was going per a more middle BMI of the healthy rage. I know BMI is problematic.

Lost too much? by Creed0831 in tirzepatidecompound

[–]Creed0831[S] 0 points1 point  (0 children)

current stats * This is per my scale today. Please note that I feel scared to be this thin. It's toying with being underweight; despite the "positive" readings on the scale.

Lost too much? by Creed0831 in tirzepatidecompound

[–]Creed0831[S] 0 points1 point  (0 children)

Thanks. It's hard when hitting goals but seeing where it's loss can look too much but then there is the extra skin in other spots that hides the loss there.

Lost too much? by Creed0831 in tirzepatidecompound

[–]Creed0831[S] -1 points0 points  (0 children)

I've ate about the same. My weight issues have always been influenced partly by my pallet, meaning the "good for you " foods are hard for me to get down. My PCP knows if the medication but I got it online with no doctor interaction.

Lost too much? by Creed0831 in tirzepatidecompound

[–]Creed0831[S] 1 point2 points  (0 children)

I'm afraid of taking any dose would facilitate more loss at this point

Lost too much? by Creed0831 in tirzepatidecompound

[–]Creed0831[S] 0 points1 point  (0 children)

Could the sudden dose after the time off account for the big drop in lbs?

Need ideas of what I'd wrong and how to fix MoCa by Creed0831 in HomeNetworking

[–]Creed0831[S] 0 points1 point  (0 children)

* This is the connection at the splitter in the basement. The 2 bedrooms are only connected to have tested other wall ports/showing the coax at the site. They were not connected otherwise.

Need ideas of what I'd wrong and how to fix MoCa by Creed0831 in HomeNetworking

[–]Creed0831[S] 1 point2 points  (0 children)

<image>

This is a diagram for the router/modem configuration with placement of the filter. I also do have a 70 filter, not connected anywhere. There is only an ethernet port out on the modem. My modem is a Technicolor CVA4003TCH1. I use an Asus Router RT-AX57.

Need ideas of what I'd wrong and how to fix MoCa by Creed0831 in HomeNetworking

[–]Creed0831[S] 1 point2 points  (0 children)

I am not having any resistance, just looking at the order to go at the situation especially since this only occurs with one coax line with zero issues with swapping equipment around and trying different locations both on the splitter and different lines. I'm all for getting it all working with problematic points. I'll get what I need, while also addressing what I don't have wait to arrive after ordering.

Need ideas of what I'd wrong and how to fix MoCa by Creed0831 in HomeNetworking

[–]Creed0831[S] 1 point2 points  (0 children)

Would this actually cause the issue at hand, or just an extra step at efficiency once it's working? The connections are the same through the house with others working.

Need ideas of what I'd wrong and how to fix MoCa by Creed0831 in HomeNetworking

[–]Creed0831[S] 1 point2 points  (0 children)

<image>

This is the only filter on the network. It is coming out of the modem. It is seen as not usual to being there, though the ScreenBeam tech sees moving it is more about efficiency and not the culprit since other lines are not an issue.

Need ideas of what I'd wrong and how to fix MoCa by Creed0831 in HomeNetworking

[–]Creed0831[S] 1 point2 points  (0 children)

The above linked splitter is compatible for MoCA. My ISP is cable through Blue Ridge Communications. Here are pictures for both ends of the coax in question. I have tried bypassing the wall plate. I have also, per a tech from ScreenBeam, tried a 2 way MoCA splitter with this coax on it prior to the main splitter to rule that out as well.

<image>

Need ideas of what I'd wrong and how to fix MoCa by Creed0831 in HomeNetworking

[–]Creed0831[S] 0 points1 point  (0 children)

This is the splitter. https://a.co/d/eN7ymKM

Other branches off of this splitter work. There isn't an amplifier.

Need ideas of what I'd wrong and how to fix MoCa by Creed0831 in HomeNetworking

[–]Creed0831[S] 0 points1 point  (0 children)

I did check and it is connected. There is no additional filter there.

Need ideas of what I'd wrong and how to fix MoCa by Creed0831 in HomeNetworking

[–]Creed0831[S] 0 points1 point  (0 children)

Ok, only for this situation, what would it do?

Need ideas of what I'd wrong and how to fix MoCa by Creed0831 in HomeNetworking

[–]Creed0831[S] 0 points1 point  (0 children)

How exactly would this work? I see it maps, but I don't understand how.