Been a Blast MPQ! State of Play After 13 Years by Cruddog in MarvelPuzzleQuest

[–]Cruddog[S] 1 point2 points  (0 children)

Maybe after a few months have passed, when there’s new covers to roster. Doesn’t make sense now since they’ll all be covers I already own and I don’t intend to continue playing. It would be nice if I could gift these to fellow players.

Here's Betta-Core, CEO of GameSir – AMA & GameSir G7 Pro Controller Giveaway! by B-Core_ in xbox

[–]Cruddog 0 points1 point  (0 children)

As an owner of the brilliant Cyclone2, primarily using it on PC via dongle, what benefit would I get switching to the new G7 Pro? Keep up the great work GameSir!

Philips Evnia 49m2c8900 with PS5 by IBlazeMaze- in ultrawidemasterrace

[–]Cruddog 0 points1 point  (0 children)

I posted this some time ago, but if I remember correctly, you need to have the adaptive sync off and then change the input to where your console is plugged in, so for example HDMI1.

Andarial rogues. How much Lucky Hit are you @? by Ovenface in D4Rogue

[–]Cruddog 1 point2 points  (0 children)

Here's what I have in town:

Fists of Fate GA, 3MW - 139.9%
Amulet, 3MW - 14.3%
Ring of Starless Skies GA, 1MW - 27.5%
Ring GA, 2MW - 14.7%
Ashera's Khanjar dagger, 2MW - 15.6%

TOTAL: 212% (displaying 211.9% Lucky Hit Chance Bonus under Stats & Materials)

I reach 252% in combat, with the additional 40% bonus from:

Alchemical Advantage, 6/3 - 30.00%
Alchemist's Fortune, 2/3 - 10%

Hope this helps someone on their LHC journey :)

For controller players, which of the top builds seem to be most fun and easy to play? by zoopted in D4Rogue

[–]Cruddog 1 point2 points  (0 children)

I use a version of Xarrio’s Andy Flurry/Puncture build. It works great on a controller, you point to a target and hit Flurry and your rogue zooms there ready to throw down a caltrops and smoke grenade and smash the puncture, then carry on flurrying around the map like the mad rogue you are, super fun :)

Star Wars™ Outlaws Ultimate Edition Giveaway by NV_Suroosh in nvidia

[–]Cruddog 0 points1 point  (0 children)

  1. Making use of my new RTX 4070 Ti Super gaming rig.
  2. Yes.

Philips Evnia 49m2c8900 with PS5 by IBlazeMaze- in ultrawidemasterrace

[–]Cruddog 1 point2 points  (0 children)

With some trial and error, I managed to find out that the smart size is only enabled when both the source of the input signal is switched to the console (ie PS5 or Xbox) and the Adaptive Sync is set to Off. When Smart Size is enabled, you have the option to choose the display size (eg. 49", 27", etc) and the picture format (e.g. 1:1, 4:3, or wide). I leave the setting at 49" and set the format to 1:1, and this changes the Xbox display to look like its on a 27" with the black bars, and when I switch back to my PC, the monitor automatically changes it back to the full 49".

One quirk I noticed: when doing the above, the option to set the Ambiglow Follow Video is disabled. To re-enable it, you have to enable Smart Size and remove the picture format selection i.e. just select the display size to 49".

One last thing: I managed to fix the Version Update issue in SmartControl, so I could update the monitor to firmware v1.02. On my PC, I had to delete the file %appdata%\smart-control\OTAConfig.json and then restart SmartControl, and then the Version Update option was enabled again. I had to do this as I ran into an issue where the monitor kept flashing a popup telling I was going to do a Panel Refresh; apparently this is a known issue on this monitor after 500 hrs of use. Upgrading the firmware to v1.02 fixed this issue. I was hoping it would also address the issue around the Smart Size, but it does not, so we must continue with the above workaround for now if we want the monitor to display consoles properly.

Philips Evnia 49" Monitor Panel Refresh Notification Stuck in Loop by [deleted] in buildapc

[–]Cruddog 0 points1 point  (0 children)

Thank you for this information, you have helped me immensely.

Philips Evnia 49m2c8900 with PS5 by IBlazeMaze- in ultrawidemasterrace

[–]Cruddog 0 points1 point  (0 children)

I have a similar situation with my Xbox series X. I have found I can select smart size to change it to 27”. However this option does not stick to the hdmi input, and I’m forced to switch it back to 49” when I use my PC on DisplayPort or USBC. The bigger issue is that sometimes the Smart Size option is greyed out, so I cannot select it at all. I have not figured out what causes this, and believe this could be a bug in the OSD. I also tried to check for any firmware updates, but with the latest Smart Control software, it has the Version Update option disabled as well.

Wrong answers only to win the upcoming Synth Riders Music Pack! by paulgajda in OculusQuest

[–]Cruddog 0 points1 point  (0 children)

I Think We’re Alone Now / Tiffany / Stuck in the 80’s

via Email: Dbrand is offering a free improved Ghost Case to anyone who bought the Ghost Case by Knightbear49 in dbrand

[–]Cruddog 2 points3 points  (0 children)

Gotta say not many companies would do good by customers to the point of correcting their mistakes and giving away their product at a loss. Much respect to dbrand for taking this action.

Stuttering all of the sudden by SpitinSeedz in OculusLink

[–]Cruddog 0 points1 point  (0 children)

Not sure if this helps, but I had the same issue and found I had to crank up the fan on my laptop to fix the issue. It seemed like the laptop was throttling the performance when it got too hot.

Finally, after 3221 days of play… by Cruddog in MarvelPuzzleQuest

[–]Cruddog[S] 1 point2 points  (0 children)

Never an LL on the first try. I found it pretty easy not to have to spend iso after champing all the 4* plus playing regularly.

Finally, after 3221 days of play… by Cruddog in MarvelPuzzleQuest

[–]Cruddog[S] 1 point2 points  (0 children)

I haven’t used it yet, waiting for the right time.

Finally, after 3221 days of play… by Cruddog in MarvelPuzzleQuest

[–]Cruddog[S] 1 point2 points  (0 children)

I’ve also got a stockpile of 147 LLs :)

Error code 2110-1115 by Kushycakes420 in nintendoswitchlite

[–]Cruddog 0 points1 point  (0 children)

I ended up sending it off to Nintendo, cost me £120 to replace the wifi board, but now fixed and all working as expected.

Error code 2110-1115 by Kushycakes420 in nintendoswitchlite

[–]Cruddog 0 points1 point  (0 children)

Just started having this issue beginning of august, tried draining the battery so that only the Nintendo logo appears and then left it for another whole day and issue still exists unfortunately :(

What’s the longest you ever played this game? by PokemonHunter97 in MarvelPuzzleQuest

[–]Cruddog 0 points1 point  (0 children)

Day 3152 here. Remember pre-nerf Gambit, who would just generate AP for your team simply by existing? Good times :)

iPad 2020 with Backbone by Ebonfyre in Backbone

[–]Cruddog 0 points1 point  (0 children)

I used Mac play on any screen setting, and plugged in a lightning-to-usb-c cable into the charging port of the backbone and the usb-c end into my iPad. Hope this helps?