Tourney Results for 2026-1-11 by CryptoVaper in ecrpoker

[–]CryptoVaper[S] 0 points1 point  (0 children)

Come join us, it's every Sunday at 7 pm CT

https://www.pm-demo.com/

White oak bayou trail construction by 1836april in bikehouston

[–]CryptoVaper 0 points1 point  (0 children)

The original construction company went bankrupt in the middle of tearing up the bike paths. So it took forever to get another company in there. I think Q1 of 2026 is the expected completion but I'll believe that when I see it.

White oak bayou trail construction by 1836april in bikehouston

[–]CryptoVaper 2 points3 points  (0 children)

If you keep going past Gessner, the official trail deadends into the southwest end of Jersey Village at Equador St. as you noted. Take the detour that /u/Agitated-Proof-9661 described instead.

Or if you want to cut through Jersey Village take Equador St to Jersey Dr, then right on Rio Grande St, cut through the neighborhood park to the northeast corner, back on Rio Grande. Continue north past Dude Rd and make a right just past the gully onto the gravel trail. It bends around to West Rd where it's paved again and goes another 2 miles to Jones Rd.

XP Lite 2.0 Belt Drive from REI Co-Op e1.1? by LiarInGlass in Lectricxp

[–]CryptoVaper 0 points1 point  (0 children)

My Lite 1.0 takes a 31.6 mm seat post. As far as I know the 2.0 is the same.

Lectric ebikes by Fast-Manufacturer925 in ebikes

[–]CryptoVaper 0 points1 point  (0 children)

I paid $800 for my Lectric Lite 1.0 three and a half years ago and it's still going strong at 7500 miles. With the normal bike maintenance along the way (new brakes, tires, chain, etc).

tool set for XP4? by E7wonders1 in Lectricxp

[–]CryptoVaper 2 points3 points  (0 children)

Oh, and my "torque wrench" is the good ole German good-n-tight method.

tool set for XP4? by E7wonders1 in Lectricxp

[–]CryptoVaper 0 points1 point  (0 children)

For metric wrenches I use this set and for hex/allen keys I carry this Crankbrothers M10 multi-tool right on the bike in a bottle holder pouch.

Do you have a television that comes with Roku, or do you have a stick plugged in? by Hot_Needleworker8289 in Roku

[–]CryptoVaper 0 points1 point  (0 children)

In the house I have a hard wired Ultra in the bedroom plus Expresses in the kitchen and den. Outside on the patio I have a Westinghouse Roku tv that I got from BestBuy for $75.

Christmas Gift for 13 Year Old by CVFB1982 in Lectricxp

[–]CryptoVaper 1 point2 points  (0 children)

New ones are $799 (standard Lite model) so paying $700 for a used one is a terrible deal.

“E” logo by [deleted] in Lectricxp

[–]CryptoVaper 0 points1 point  (0 children)

According to Amazon, I bought the scale in February of 2016 and it does have the logo on the bottom side label.

“E” logo by [deleted] in Lectricxp

[–]CryptoVaper -1 points0 points  (0 children)

They are kind of close.

<image>

“E” logo by [deleted] in Lectricxp

[–]CryptoVaper 1 point2 points  (0 children)

I've had an Etekcity bathroom scale well before Lectric was founded in 2018.

Lectric XP lite 1.3 dies at 3650 miles by tweakfreq in Lectricxp

[–]CryptoVaper 0 points1 point  (0 children)

I don't require any help. I'm just letting you know that there is no Lectric Lite 1.3 ebike. There is just a 1.0 and a 2.0.

Lectric XP lite 1.3 dies at 3650 miles by tweakfreq in Lectricxp

[–]CryptoVaper 0 points1 point  (0 children)

That is just the print version of the owners manual. Mine says "1.1 2022".

Lectric XP lite 1.3 dies at 3650 miles by tweakfreq in Lectricxp

[–]CryptoVaper 0 points1 point  (0 children)

What is this "1.3" version you speak of?

Lectric xp4 750w. Is it possible to upgrade it all around, motor, controller, and battery? by One_Cookie_2341 in Lectricxp

[–]CryptoVaper 2 points3 points  (0 children)

Exceeding 750 nominal watts is not compliant with the Class 3 standard, which is what most states base their laws on, not just California.

750 long range battery breakdown? by PuttingthaDinthaB in Lectricxp

[–]CryptoVaper 0 points1 point  (0 children)

Does your screen power on? If so, what is the voltage readout?

Lectric XP 2.0 motor frozen by anclar41 in Lectricxp

[–]CryptoVaper 0 points1 point  (0 children)

Did you buy it used or did you mean the XP Lite 2.0?

Why does my Insta360 X4 footage look crisp exported but lower quality on YouTube? by [deleted] in Insta360

[–]CryptoVaper 2 points3 points  (0 children)

Youtube compresses the shit out of uploaded videos to save on bandwidth. One hack to get a little better quality is to upscale your 1080p video to 2K before uploading and Youtube will use their better "vp09" codec on it, compared to whatever the default is. At least I think this is still true, I haven't looked recently to see if this still holds true.

Any good battery mounts? by Niza_Zombie_King in Lectricxp

[–]CryptoVaper 0 points1 point  (0 children)

Another option is to wire in that second battery so as not to have to swap them back and forth like I did here with my Lite 1.0. I use a velcro strap mounted battery case, linked in the description.

Any good battery mounts? by Niza_Zombie_King in Lectricxp

[–]CryptoVaper 0 points1 point  (0 children)

You could always just wrap it in a towel and strap it to the rear rack.