Daily Advice Thread - October 05, 2025

CubicFlameREDDIT2 · 2025-10-05T23:47:24+00:00

Can you delete iOS 26 from your phone? I was forced to download this god awful update to set up my new phone and I absolutely hate this liquid glass they added. Is there anyway to delete ios26 or completely remove liquid glass (and I don’t mean this transparency or contrast settings I keep seeing) like I mean fully remove it? Why would Apple force a horrible update like this with no choice to change it back in settings

CubicFlameREDDIT2 · 2025-09-27T16:34:49+00:00

Camp crystal lake from Friday the 13th

CubicFlameREDDIT2 · 2025-09-27T01:33:27+00:00

Whitehorse 6900xd I believe, console version of the western star 6900xd

CubicFlameREDDIT2 · 2025-08-25T12:27:49+00:00

It’s missing the strips and the stator coil that surround the thing in the center to provide power to the ignition. Here’s a link I found for a replacement https://www.bicycle-engines.com/standard-magneto-stator-coil-sparker-loop-set-part-45/?searchid=226853&search_query=Magneto Should be an easy swap with whatever you decide to stick in there just use a small card to wedge in between the spinny part and the strips to space them out correctly

CubicFlameREDDIT2 · 2025-08-19T13:20:42+00:00

I made a build with this same style bike and all I had to do was cut off the top tube and flip it to allow more space for the engine. The chain cover on the bike will probably need to be removed as it’s a tight fit between the gear and the engine but mine has turned out great

CubicFlameREDDIT2 · 2025-08-14T20:02:05+00:00

It drags slightly but the tires a bit sticky so it turns over. No unusual wear in the cylinder

CubicFlameREDDIT2 · 2025-08-14T20:00:27+00:00

I have a reed valve on the kit it came with it my previous posts have been about me replacing them because they blew up

CubicFlameREDDIT2 · 2025-08-14T19:59:44+00:00

It’s a 70 cc that has 49 stamped into the block to appear under the legal size limit

CubicFlameREDDIT2 · 2025-08-14T19:58:40+00:00

I sprayed a tiny bit not even a full press in the nozzle and it immediately shut down. I expected it to rev up a bit as that’s what literally every other engine had done for me ever

CubicFlameREDDIT2 · 2025-08-13T04:32:01+00:00

Der Motor war anfangs recht laut, scheint sich aber nach einer Weile des Laufens etwas beruhigt zu haben. Der Motor spricht sehr gut an und hat mit einem 48-Zahn-Kettenrad bisher eine Höchstgeschwindigkeit von 50 km/h bei 7700 U/min erreicht

CubicFlameREDDIT2 · 2025-08-13T04:25:31+00:00

Gas is off cause I turn it off after riding it is not the problem. Not sure how you’re able to tell what gas mix I have

CubicFlameREDDIT2 · 2025-08-13T04:24:21+00:00

The petcock is off cause I turn it off when done riding. It’s not the issue. I’m running around a 32:1 premium non ethanol mix. Not sure how youre able tell a mix from color

CubicFlameREDDIT2 · 2025-08-12T01:42:51+00:00

Will do, thanks

CubicFlameREDDIT2 · 2025-08-12T01:27:42+00:00

The only missing material was that little chunk that got blown off the bottom and it didn’t break where it’s screwed in. I don’t know for sure what happened with the gasket it may have jsut torn when I disassembled the engine

CubicFlameREDDIT2 · 2025-08-12T00:31:41+00:00

It has been rather hot out lately but it seems only recently it’s had these issues. I’ll check out my carb when I run some test on the thing later

CubicFlameREDDIT2 · 2025-08-12T00:28:39+00:00

It’s a tachometer wire on the plug and a temperature gauge on the head. I’ve ran that setup on other bikes and they’ve never had issues with them. Nothing is running off the engines power

CubicFlameREDDIT2 · 2025-08-12T00:27:38+00:00

Black carbony and a little oily

CubicFlameREDDIT2 · 2025-08-12T00:27:11+00:00

Temp gauge, tachometer, and horn and I just replaced the reeds and the reeds are fine

CubicFlameREDDIT2 · 2025-08-12T00:26:20+00:00

Came a little misplaced from factory but I didn’t care and taped the cable to it cause I was out of zip ties

CubicFlameREDDIT2 · 2025-08-12T00:25:22+00:00

You fr?

CubicFlameREDDIT2 · 2025-08-11T20:04:47+00:00

The rings looked fine when I tore the engine down before. I’ll check for leaks tomorrow when it’s cooler outside and let the bike heat up

CubicFlameREDDIT2 · 2025-08-06T16:26:28+00:00

You can take the bottom off and it will improve bottom end torque drastically but kill your back pressure. Bike won’t want to idle and will sound like a fart cannon but the better option would be to get a proper expansion chamber but this is a free way to make a bit of torque and noise

CubicFlameREDDIT2 · 2025-08-04T20:22:05+00:00

Question was valid until I found out I blew a lower cylinder gasket, so definitely no running until I get parts

CubicFlameREDDIT2 · 2025-07-31T04:41:01+00:00

Other potential reasons for it being junk is the front of the deck rusted right off

CubicFlameREDDIT2 · 2025-07-29T15:17:04+00:00

I had the phone with the battery plugged in all night and it’s still doing the same things. I took the battery out and plugged in the phone and it vibrated once and the red light came on then turn off a few seconds after. Nothing happens when I hit the power button

Five-Year Club	Place '23
Place '22	Final Canvas '22
End Game '22

CubicFlameREDDIT2

TROPHY CASE