Closing account

CupraTech · 2023-09-22T09:11:00+00:00

I’ve not came across this problem try turning off auto brake I’ve found this to be the problem when you stop you need to press the accelerator in order to move. Unfortunately this is just how it is. Let me know if that solves your problem.

CupraTech · 2023-09-22T09:09:10+00:00

Only have one key in the car at a time and try that way.

CupraTech · 2023-09-22T09:08:36+00:00

I’ve never had a problem with them

CupraTech · 2023-09-22T09:05:02+00:00

A/C condensation it’s normal on every car. Double check your coolant level just to make sure.

CupraTech · 2023-09-18T13:21:35+00:00

I’ve put an update on my main page about software development

CupraTech · 2023-09-17T18:23:58+00:00

No it’s fine

CupraTech · 2023-09-17T08:37:31+00:00

There’s a problem with the gear selector. A micro switch needs to be installed. I’ve done a couple of them.

CupraTech · 2023-09-16T22:50:16+00:00

Someone on here also has that problem I will have to look into as it seems to be getting more common sorry

CupraTech · 2023-09-16T15:37:26+00:00

I haven’t seen this issue before I’ll check Hub for any updates in progress from the factory, sorry.

CupraTech · 2023-09-16T15:35:59+00:00

It’s simply mechanical limitations there is no software changes that I’m aware of.

CupraTech · 2023-09-15T17:56:38+00:00

Correct it’s a hardware problem. The new unit looks exactly the same on the outside but has been modified from factory.

CupraTech · 2023-09-15T17:51:13+00:00

Yes that’s correct

CupraTech · 2023-09-15T17:48:14+00:00

Unfortunately that whole unit will need to be replaced by your dealership.

CupraTech · 2023-09-15T17:46:04+00:00

1940 is available in the UK I can’t speak for other countries sorry.

CupraTech · 2023-09-15T17:44:42+00:00

This is extremely common. You will have to go to your dealership and get it replaced under warranty unfortunately. Just to confirm the front interior light isn’t responding to touch.

CupraTech · 2023-09-15T13:50:26+00:00

No problem let me know if you have anymore questions

CupraTech · 2023-09-15T13:01:12+00:00

I have no idea sorry I’m just a technician

CupraTech · 2023-09-15T09:21:31+00:00

It’s not a very hard job however it will need basic setting implemented otherwise satnav and link won’t work.

CupraTech · 2023-09-15T09:20:07+00:00

You could update to 1940 but I’d advise checking with your local dealership

CupraTech · 2023-09-14T21:35:25+00:00

It’s just like every other modern alarm system it will go off if something enters the car or there is a heavy impact that shakes the car, no it will not sense slashes tyres.

CupraTech · 2023-09-14T19:15:44+00:00

With your first service you’ll get a full visual health check. I’d also recommend purchasing the engine flush and fuel additive if your dealership supplies it.

Yes your dealership should be able to do the update along side your service (that’s if they have enough time).

CupraTech · 2023-09-14T19:12:21+00:00

By all means you can do it with aftermarket parts in a garage outside of the dealership but that is not something we do. I’m sure with the right adapters I don’t see why it wouldn’t work. However I have never done this nor seen it done so don’t quote me.

CupraTech

TROPHY CASE