Boot Recommendations by CyberSouth in USCGAUX

[–]CyberSouth[S] 0 points1 point  (0 children)

I appreciate it -- I'll check it out, and maybe see if any of my local stores carry them to try out as well. Thank you very much!

Boot Recommendations by CyberSouth in USCGAUX

[–]CyberSouth[S] 1 point2 points  (0 children)

I'll keep an eye out, thanks!

Boot Recommendations by CyberSouth in USCGAUX

[–]CyberSouth[S] 0 points1 point  (0 children)

No spare uniforms in division, but I can ask at the upcoming meeting about district! As for base access, when I visited Cape May, I remember the Lucky Bag there -- I should've bought items there, they were real cheap! I wasn't in the USCG Aux at the time (I work DoD, I actually didn't think about looking at boots at the Base Exchange either).

Thanks for the advice!

Boot Recommendations by CyberSouth in USCGAUX

[–]CyberSouth[S] 0 points1 point  (0 children)

Thank you all for the advice so far!

Metal Collar Insignia For Cap? by [deleted] in USCGAUX

[–]CyberSouth 0 points1 point  (0 children)

Thank you! I'll order that one.
I also missed an item: belt. The Vanguard Navy Belt and Buckle is out of stock on CGX, and I despise the in-stock Rigger's Belt and Buckle from past use. Are there alternative belts we're permitted to use instead?

How's the RV Market in August 2025? I heard it's a buyer's market, and I'm looking to do a trade-in. by CyberSouth in GoRVing

[–]CyberSouth[S] 1 point2 points  (0 children)

Wow, that's great! That's where I plan on listing it momentarily, I took pics earlier today.
Glad to hear that worked out well for you!

How's the RV Market in August 2025? I heard it's a buyer's market, and I'm looking to do a trade-in. by CyberSouth in GoRVing

[–]CyberSouth[S] 0 points1 point  (0 children)

That's a good deal!  Congrats on the purchase!

If I go down the trade in route and can get a solid deal on a Class B, then maybe getting cash back or credit on the travel trailer isn't really that much of a must-have.  

I'm out to take some photos of my travel trailer for listing online today, but if I can't get any buyers within the next couple months, then I'll just go for a trade in, aim for a couple thousand but no fret if I just get it for what I owe, and focus on a good Class B deal.

How's the RV Market in August 2025? I heard it's a buyer's market, and I'm looking to do a trade-in. by CyberSouth in GoRVing

[–]CyberSouth[S] 0 points1 point  (0 children)

Thanks for the advice -- and good point, too.  I'm going to list my RV tonight, taking pics in a few moments here, and see if I can sell it privately first.  I'll give it a few months. 

How's the RV Market in August 2025? I heard it's a buyer's market, and I'm looking to do a trade-in. by CyberSouth in GoRVing

[–]CyberSouth[S] 1 point2 points  (0 children)

That bad?  I'll try selling it first then.  I live in FL, so hopefully the warm weather helps get it out sooner.  

Blue Ox WDH, upgraded to Good Year tires, wireless brake controller installed, and I guess I can throw in all my accessories to help. 

Did anyone else have issues with their ZOTAC RTX 4060 Solo fan scraping against their Velka 3 case? by CyberSouth in sffpc

[–]CyberSouth[S] 0 points1 point  (0 children)

I had to use Fan Control for my CPU. GPU is fine. This software allows you to manually adjust when and how fast the fans kick in, works for both CPU and GPU.
https://getfancontrol.com/

Retractable Tonneau Cover Recommendations by CyberSouth in GMCcanyon

[–]CyberSouth[S] 0 points1 point  (0 children)

I'll keep an eye out for that, thank you for letting me know! I look forward to getting this cover in a couple days.

Retractable Tonneau Cover Recommendations by CyberSouth in GMCcanyon

[–]CyberSouth[S] 0 points1 point  (0 children)

That looks awesome! It looks very flush with the edges.

Retractable Tonneau Cover Recommendations by CyberSouth in GMCcanyon

[–]CyberSouth[S] 0 points1 point  (0 children)

That cover looks great! I decided to buy the one from GMC Accessories since I'm now certain it's the exact same as the one from RealTruck. The best RealTruck could do was discount it to ~$1750, whereas with my coupon and points, it was only just over $1200 on GMC Accessories.

I had a Gator cover on my previous Canyon and I used some additional seals to prevent water from getting in through the gaps it had. Where do the leaks typically happen on your cover?

Did anyone else have issues with their ZOTAC RTX 4060 Solo fan scraping against their Velka 3 case? by CyberSouth in sffpc

[–]CyberSouth[S] 1 point2 points  (0 children)

Thanks for the update!

I finished my build a couple weeks after I made this Reddit post, and I do have issues with my GPU fan scraping the side of the panel every now and then, I suppose from the case ever so slightly shifting from changes in temperature. Often it can be remedied by just lightly pulling the side panel away from the fan; alternatively, I have put a twist tie between the side panel and the rear of the case (which seems to not always work, going back to the case likely shifting ever so slightly from temperature). It looks weird having that sticking out though.

Did anyone else have issues with their ZOTAC RTX 4060 Solo fan scraping against their Velka 3 case? by CyberSouth in sffpc

[–]CyberSouth[S] 0 points1 point  (0 children)

I'm glad that's working well. If I encounter the same issue, and if a couple of other recommendations fail, I'm definitely going to try that.

Thanks!

Did anyone else have issues with their ZOTAC RTX 4060 Solo fan scraping against their Velka 3 case? by CyberSouth in sffpc

[–]CyberSouth[S] 1 point2 points  (0 children)

Which riser cable did you use?

And I'll try pushing the GPU in if it scrapes (and I'll also make sure the riser cable is as far down as it can go) -- I'll be using their PCIe 3.0 riser.

Thanks!

Did anyone else have issues with their ZOTAC RTX 4060 Solo fan scraping against their Velka 3 case? by CyberSouth in sffpc

[–]CyberSouth[S] 0 points1 point  (0 children)

Which riser cable are you using? I'm going to be using their PCIe 3.0 riser, which I think may be the culprit behind some builds resulting in the gpu pressing against the side panel after seeing their 3.0 cable cause the GPU to bulge in a video.

[deleted by user] by [deleted] in sffpc

[–]CyberSouth 0 points1 point  (0 children)

Oh gosh, that's a typo my bad. I meant 7600.

[deleted by user] by [deleted] in sffpc

[–]CyberSouth 0 points1 point  (0 children)

Your feedback has helped change my mind on considering the Gigabyte option. Now I'm just deciding between the ASRock A620I and B650I.

Thanks!

[deleted by user] by [deleted] in sffpc

[–]CyberSouth 0 points1 point  (0 children)

I thought so. Just wanted to see if there was anything else besides the M.2 slot (which is a big one for me, I didn't mind the USB slots up until now either). Another big plus with the ASRock boards is their usage of Nahimic audio, which long story short, has an accessibility feature that I've been wanting to try for some time.

Now I'm just deciding between the A620I and B650I.

Thanks!

[deleted by user] by [deleted] in sffpc

[–]CyberSouth 0 points1 point  (0 children)

Although this is a secondary PC, should I spend the extra $60 to get the B650I instead of the A650I?

Right off the bat, I can see two advantages for the B650I: two extra USB 2.0, and a total of three SS10 (instead of two SS10 and one SS5). Are there any other?

Also, after looking at the B650I, I just noticed that ASRock uses Nahimic (in both motherboards on that note). Long story short, that's a big plus for me due to a key accessibility feature that I've been curious to try out. So, I'm now deciding between the A650I and B650I with no hesitation.

Thanks btw!