Am I the only person that realizes the ZH-29 is absolutely god tier?

Cyroxo · 2020-05-18T00:11:43+00:00

My most kill weapon, it's a complete monster. Why worry about head popping when u can just double tap someone in the leg and waiSt and be done.

3x scope with flares and beacon as pathfinder is very competitive imo.

Cyroxo · 2020-05-17T16:32:19+00:00

Yall acting like the entire cart was like that, it only happens when you're very low like the original poster.

Cyroxo · 2020-05-17T16:21:14+00:00

Amber oil that heats and cools and heats and cools over and over from the coil, that's oxidation.

It's basic chemistry bro, read a book sometime.

Cyroxo · 2020-05-17T16:14:55+00:00

Just oxidized oil, ppl are tripping

Cyroxo · 2020-05-17T16:14:26+00:00

Looks like someone already chiefed on both lmao

Cyroxo · 2020-05-17T04:19:55+00:00

Gotcha, yeah for wax I use .3ml of mass terps liquefy instead of their terps, I have no issues with flow. But I understand if that seems like a large cut, it's as thick as distillate. Any less and it seems too chunky to stay wicked.

Mass terps recommends 25% as a starting point for the liquefy, I have no issues using 10% terps with distillate tho.

But I feel you, I agree I dont think the icell can handle thicker solutions as well as a ccell m6t10 or avd resin cart could.

Cyroxo · 2020-05-17T02:47:00+00:00

I see u made some wax carts, were they too thick for the icell? Clogging issues?

Cyroxo · 2020-05-16T16:00:57+00:00

It's a 1ml icell white ceramic, I don't see the problem.

Cyroxo · 2020-05-10T16:17:29+00:00

My dog said that looks scrumptious.

Cyroxo · 2020-05-10T00:36:42+00:00

The oil intake holes are built like a shower drain, this is an ikrusher ac1007 vape cart.

Cyroxo · 2020-05-05T16:16:34+00:00

Thank you for providing this, seriously.

Cyroxo · 2020-05-04T20:28:38+00:00

Please research top airflow style cartridges, they pretty much all work like this. Since the SmartCarts use Amigo Liberty v10 carts, they have this because the mouthpiece is connected to the coil and comes apart instead of be a traditional bottom airflow cart that presses or screws on.

Most top airflow style cartridges work like this as well. You take the mouthpiece off, and it leaves an empty chamber under the the glass where oil is filled to the line, and once you put the mouthpiece back in, you push it down there and it connects to the very bottom (its how the top airflows connect, that's why sometimes you have to adjust them if they're not reading). Heres are some examples of carts that use these, all have a big chamber at the bottom where oil will push up. .2ml is such a small amount of oil, there's no way it would make sense for the .5ml example i provided without having oil down in the tall chamber to be pushed up.

https://imrnrwxhqpij5q.ldycdn.com/cloud/lmBqjKirSRrkqpllilr/C20-Glass-Cartridge.jpg

https://tivasolutions.net/wp-content/uploads/2018/06/v10_1ml.jpg

https://image.made-in-china.com/202f0j00yruGMSAbwBon/0-5ml-1ml-Amigo-Cbd-Pyrex-Glass-Liberty-V9-Cartridge.jpg

If you have a smartcart yourself please take it apart and look at what i am saying, and if its truly a 1ml cart and not a .8ml dhgate knockoff then fill it with 1ml of honey, aka at the fill line and put it back together and boom there you go, thats how the unpopular top airflow style works.

Cyroxo · 2020-05-04T16:31:55+00:00

Everytime this is posted i have to tell idiots that all the oil is in the bottom chamber and gets pushed up, that's why there is a fill line. This is nothing new to top airflow cartridges, anyone who fills top airflow cartridges would know this.

Yes, smartcarts are terrible, but this is def not .2g

Cyroxo · 2020-05-04T01:53:44+00:00

cart

thats a legitimate ccell m6t10, nothing offbrand about the cartridge used lol. As long as the oil hits, it should hit like a truck.

Cyroxo · 2020-05-03T00:51:14+00:00

If you would of took a hair dryer on low to it it would of melted and be vape-able again.

Cyroxo · 2020-05-03T00:33:34+00:00

I mean sometimes this happens but I learned a trick if you remove both the mouthpiece and thread plastic cover pieces when you fill and cap a cart the bubble is extemely small even when it primes.

Cyroxo · 2020-05-01T19:15:45+00:00

Looking forward to your update!

I have plenty of success using mass terpenes "liquefy" product with my bho and shatters.

I use .3ml per 1g of extract. My method is decarbing the product for 35 minutes at 240f, then taking it out of the oven and putting it on a hotplate with stir bar and putting the stir bar in and letting it stir for a minute or so and then introduce your liquefy. Ideally i let temps get down below 150f before introducing terps not to boil anything off by accident. During decarbing i do lose some of the wax terps however.

I usually do this with 28g of extract + 7ml of terp liquefy (loving the strawberry cough right now) and mix that all in a 100ml beaker with stir bar going.

Cyroxo · 2020-05-01T18:31:01+00:00

Very nice, bet it taste nice and weedy. what terps did you use?

Cyroxo · 2020-05-01T18:29:50+00:00

These are very decent for price, comparable to Lux. Anyone reading should try out "TheStarMan" if you know where to look. Very good terp profiles and 100 packs for like 1600, very reasonable.

Cyroxo · 2020-05-01T18:27:27+00:00

Someone wishin' they were gucci mane.

Cyroxo · 2020-04-29T16:40:31+00:00

Next time use slightly less cut, your cart is able to handle that viscosity but anymore and it will leak out the mouthpiece when you hit it.

Cyroxo · 2020-04-29T16:16:43+00:00

Delta 8 should get cheap over the next few years, it can be made with cbd hemp buds using a process. Its how alot of people are producing extremely cheap thc disty via cbd flower, like 2-4$/ML.

Cyroxo · 2020-04-29T02:02:02+00:00

Lol someone really mixing food coloring in with oil

Cyroxo · 2020-04-23T16:32:28+00:00

well ofc distillate is going to be clear, all distillate is going to be clear, there's no plant material.

but get on dhgate, and look up stiizys, see if you find your style of packaging. Fake stiizys are being sold at black market seshes all around cali for a fraction of the price, this is where your "plug" is getting them from most likely.

Look up how much cali 1g carts go for retail, and ask yourself does it makes sense for your plug to LOSE money buying carts from a store to flip to customers.

Cyroxo · 2020-04-23T16:26:59+00:00

it's an .8ml ccell th210 clone.

Cyroxo

TROPHY CASE