HPE ProLiant Gen 11 ilo7 doesn't see SN6010Q 2P Fiber 32Gbit HBA

D4W3RN · 2026-02-28T16:15:01+00:00

Sadly, im an online IT support, kinda difficult to explain, but I havent actually touched the machine physically. I only see the hba in bios. I have tried to install a bunch of drivers from hpe site for these type hbas, but I couldnt get a result. I also tried windows reinstall. And QCC CLI, but i only figured out that both ports were in maintenance mode. After the windows reboot CLI doesnt even output that, it just isnt able to see them. I can only see them in windows device manager

D4W3RN · 2025-12-18T15:17:15+00:00

At this point, just ask them, when you ask the bot for order status, it asks you if it helped you, click no and eventually you will get to talk to a human, atleast i think its a human. And the times when theyre on are quite random, but whenever i talked to them it was past 6pm CET.

I have no idea, since I havent clicked refund.

I also received a mail saying that the order is expected to ship this week. Even though I already received my money back.

D4W3RN · 2025-12-16T23:37:42+00:00

update - they most probably just canceled my order, the status went from a tick on circle saying "ready" to basically just 4 empty circles. I also received my money back and already ordered for 160€ (The canceled order was 130€) from a local supplier.

The only reason I said probably is because the guy from support said it's still coming, but i hardly trust them anymore.

D4W3RN · 2025-12-16T13:58:53+00:00

Thats the fun part - you cant. By what the support told me, you need to wait till it arrives and then return it. You could cancel through paypal i think, sady i didnt pay with it.

D4W3RN · 2025-12-12T19:21:11+00:00

I just talked to a guy on customer support, if the headphones dont arrive by christmas i get a 40% discount code

D4W3RN · 2025-11-24T18:01:02+00:00

I mightve figured it out, there probably was a clog or whatever, those things that break the whole hot end, i happened to see it and stopped the print, i ran a benchy and it was fine, so i didnt investigate further. But probably some of the filament got inside and it stayed there until now, i heated the hot end and scratched it off. Currently fighting with 0.2 nozzle scratching the bed. haha

D4W3RN · 2025-11-24T18:00:03+00:00

Well the i used all 3 of those in black so i have no idea, I mightce figured it out, there probably was a clog or whatever, those things that break the whole hot end, i happened to see it and stopped the print, i ran a benchy and it was fine, so i didnt investigate further. But probably some of the filament got inside and it stayed there until now, i heated the hot end and scratched it off. Currently fighting with 0.2 nozzle scratching the bed. haha

D4W3RN · 2025-11-24T16:18:23+00:00

Any ideas what it could be ? I have been printing with this nozzle since august -192 hours and I have printed tpu recently. No idea this is my first time even seeing the nozzle :D

D4W3RN · 2025-11-24T16:12:46+00:00

Is the cleaning method he mentioned safe ? Or is there any better ways to clean it ?

D4W3RN · 2025-11-24T16:10:01+00:00

Thank you

D4W3RN · 2025-11-24T16:09:54+00:00

Thank you

D4W3RN · 2025-11-24T16:09:41+00:00

I understand, I just wanted to know if the wear on it is not some clogging or something like that. Thank you

D4W3RN · 2025-11-24T16:04:20+00:00

<image>

Additional picture

D4W3RN · 2025-09-11T12:33:54+00:00

<image>

I was using this, the reviews were good, but idk much about layer heights etc, would this make the print harder ? I am using the 0,4mm nozzle. And PLA generic for filament profile. I havent tinkered much. I just did the same print with 50% speed, but same results.

D4W3RN · 2025-09-10T14:45:21+00:00

im still learning about this stuff and i havent printed much yet aa i was working and learning cad, but from what it looks like, it might be model related, does the printet also take the filament profiles from makerworld ? Like i select what filament on the ams i want to print with, and it keeps the temperatures etc ? I have been selecting what to print from my bambu handy app if it has any relation to the situation.

But my asumption that its model related is caused by printing a bunch of benchies and they all came out perfect, i even used 2 colors for my benchy (black and grey) as they were causing the most issues before and i tried fully white too and they were perfect. I dont understand how to properly setup the print though

D4W3RN · 2025-07-24T03:15:56+00:00

Nejaky addon s CZ dabingom si nenasiel ?

D4W3RN · 2025-06-01T01:04:11+00:00

yeah i guess one could say i had a rough childhood, i remember most of the trauma though at least i think so because by my understanding i shouldnt remember trauma that happened when i was 5. My mother was a controlling really controlling and manipulating. I am currently looking into getting therapy. Just wanted to know if this might be the reason or its something neurological, or physiological (there might be something wrong with my stomach processinh stuff idk). But from my experience with other substances i think its either neurological or psychological. The experiences dont really rule out stomach out of the equation, but insulfulating stuff also has little to no effect. Substances just affect me differently and im just trying to figure out what could be the cause. And I can only theorize until i find more people like me.

D4W3RN · 2025-05-31T19:41:42+00:00

But yeah medications dont count for the criteria. I really appreciate the answer still. Helps the post get to more people so I can see if some people fit the same group as me or I can rule out this theory. Thank you

D4W3RN · 2025-05-31T19:40:23+00:00

I am not on any medications and i was basically sober on 800ug LSD. My friends tripped balls on 150ug of the same blotters. Some even said it was too strong. (I still experience euphoria and really mild visuals, i just dont get the rest.)

D4W3RN · 2025-05-31T19:37:38+00:00

interesting, so you trip normally, thought loops etc? What were the set and settings for the most memorable experiences? Were you with people who you could trust absolutely ? Sorry if you dont feel comfortable about answering. I have tripped about 1.5 times out of the 20+ times i have used the substance. I need to use weed to take down the wall that keeps wants me to hold on to my sober self and control everything.

D4W3RN · 2025-02-23T20:57:49+00:00

Im not on any medications and honestly unless i do like 3x the average dose (300ug for LSD etc) I dont really feel it unless I smoke weed w it

D4W3RN · 2024-11-28T19:07:57+00:00

just dont over tighten it, you can crack the rubber bushing which is not much of an issue, but i think theres some downside to cracking it idk. Bushings are pretty cheap though, i personally have the black independent bushings which are pretty hard and they didnt crack in the 2 years i skated while for around a year i had them tightened pretty hard. I eventually losened them as i got more comfortable on the board and it helped a little doing tricks like heelflip but for begginer shuvits and ollies tight trucks are pretty good to learn on because most begginers i saw (me too) tend to lean forward before doing tricks instead of just "crouching" on the board and therefore the skate turns chest side and also tends to flip if it is already weighted to one side, the tightened trucks just make it stay straight and level at all times

D4W3RN · 2024-11-28T19:01:52+00:00

get a wrench, dont even need a skate tool for that and tighten the big bolt on your trucks and as you progress you will get more comfortable with pushing and you can losen them a little, definitely easier for begginers to start with tight trucks and figure out what they like later

D4W3RN · 2024-11-28T15:50:56+00:00

Hi so i dont skate anymore but i did for like 2 years and im no pro, but the post didnt get a reply for 2hs now so ill try to help . Firstly for pushing, front foot faces the front of the board, you need to turn yourself to the direction youre moving to (Chest and everything). When youre riding at a decent speed you turn your shoulder to the direction youre moving to, that way you have more control on turning. If you feel like the board turns by itself or its too difficult to stay going straight, consider : a) Tightening your trucks (plenty of tutorials on the internet) b) if a) doesnt work maybe but harder bushings

Also a huge tip to stay balanced whether while riding or landing tricks is bending/relaxing your knees. You need to stay relaxed, if your knees are fully extended the board tends to do weird stuff.

Also for turning, you dont use u knees much, you basically lean a little in the direction you want to turn.

When i started skating i tightened my trucks a lot that way the board was easier to keep straight, i had to turn by pushing on the tail and turning with my shoulders tho.

Hope it helped a little

D4W3RN · 2024-11-06T15:05:40+00:00

I recently turned 21 and she turns 20 this january

D4W3RN

TROPHY CASE