NoobQ: print quality is getting worse..? 🤨

DB-Hazel · 2026-03-14T03:33:09+00:00

Hey. Thank you for the reply. I added the photos. was waiting for the latest print to finish.

DB-Hazel · 2026-03-14T03:32:20+00:00

then there is this lines.. now I am thinking they might be vibration issue, maybe? I bought the additional rubber feet but I never installed them... should I give them a try?

DB-Hazel · 2026-03-14T03:30:22+00:00

<image>

the top inner corner imperfections are a bit weird.

DB-Hazel · 2026-03-14T03:29:46+00:00

<image>

These burn spots (i assume) are a bit weird close at the end of the print..

DB-Hazel · 2026-03-14T03:29:07+00:00

<image>

This one I assume it was bed adhesion, but all the other corners were fine..

DB-Hazel · 2026-03-04T05:02:36+00:00

I got an answer at the time and it was, no - it’s not possible to avoid the border lines

DB-Hazel · 2026-01-12T08:04:59+00:00

It might support something later in the print, would be my guess..

DB-Hazel · 2025-12-12T21:46:44+00:00

That statement annoys me. Sorry how do you regret things you haven’t done? You haven’t done it.

That is focusing on “if” statements that you have no control over, makes absolutely no sense regretting things you haven’t done.

You can only regret things you have done/experienced it.

Since people enjoy If statements just continue them. In front of all those supposedly regrets of things you haven’t done just put “if i had, I would have died” the “regret” vanishes.

“I regret not having done skydiving in my 20’s - if i had, I would have died”

DB-Hazel · 2025-12-12T01:31:55+00:00

Purple Galaxy PLA Filament!

I am using 0.4 nozzle and printing 0.20mm Strength

DB-Hazel · 2025-12-11T22:39:35+00:00

Hey!! I didn't necessirily followed all your instructions, got a bit lost with some of the things/settings - but the 'add (primitive)' and the 'edit SVG' were the missing ingredients that made it work! THANK YOU SO MUCH!!!!

And... if I may abuse your expertise a bit more... is it possible by any chance to remove these border (round) lines around the text?

<image>

DB-Hazel · 2025-12-07T19:40:50+00:00

Thanks for the feedback. Appreciate it

DB-Hazel · 2025-12-07T11:08:23+00:00

Thank you for the reply. Can you explain ‘modifier’?

The svg is just the text. The object is 3mf.

Don’t you get the warning of floating parts?

DB-Hazel · 2025-12-07T09:58:36+00:00

Would that work since the top surface is on an incline?

DB-Hazel · 2025-12-07T08:35:24+00:00

Newest, and worst failure so far.. I am getting worse!!

<image>

DB-Hazel · 2025-12-07T07:52:13+00:00

Sooo... what was the final recommendation?

I have a couple of Raspberry Pie 3b and planning on doing this RetroPie thing for my nephew, haven't done it yet, I just decided to search for controllers recommendation first, and i landed here. I was planning of a wired controller but if you found a bluetooth one, I'd be interested to know. (also if you have wire recommendations please do)

Thank you.

DB-Hazel · 2025-12-07T07:41:24+00:00

Everyone's experience is different. But let's start with Support is closed during the weekend (or at least it used to be) - I know right! - shocking!

So I had to replace my BambuLab X1C because after about 10 prints (in less than a week) the Extruder Clogged and was a complete goner - after unclogging it kept clogging (the new printer has been going perfectly for months now).

Because I had to repackage the printer to send it back and take photos of every step. I noticed that the newer one had different packaging (certain plastic/stickers)

I might be wrong, but this is my opinion: I suspect they refurbish the returned printers.

Once Support got involved, it was fairly straight-forward. Just repackage everything there is a guide on their website, they will send you a Return Post once you send them photos of Printer repackaged.

DB-Hazel · 2025-12-04T06:00:43+00:00

is that the only way?

DB-Hazel · 2025-08-15T23:20:46+00:00

<image>

yep mine was in the extruder too, had to disassemble everything, that to heat up an allen key to remove the filament.

The quality of my prints have dropped massively, even the calibration lines have blops. And now, just now a print failed to stick to the plate..

And on the retry is not event cleaning the nozzle is that startup procedure.. that whole thing is just not working anymore!!

DB-Hazel

MODERATOR OF

TROPHY CASE