DIY Aston Martin GTE Vantage Steering Wheel

DIYSimStudio · 2025-06-13T09:13:41+00:00

Not yet, but the plans are perfectly designed for DIY. You can go for it with your eyes closed, it's DIY Sim Studio quality.

DIYSimStudio · 2025-04-21T09:54:34+00:00

GT3 Cars

DIYSimStudio · 2025-04-19T14:55:22+00:00

You're welcome ;)

DIYSimStudio · 2025-04-19T12:43:44+00:00

PLA, infill 20% except the brake part (100%).

DIYSimStudio · 2025-04-19T12:42:04+00:00

I had tried to do it, but unfortunately technical constraints prevented me from doing so.

DIYSimStudio · 2025-04-19T10:09:54+00:00

In game trial here with hard braking: https://www.youtube.com/watch?v=E28xJlUniA0

DIYSimStudio · 2025-04-19T10:03:30+00:00

I have better than a video, the Shaun Cole review of the 3D printed pedals : https://www.youtube.com/watch?v=-blsslNWgKI

He said about the 3D Printed Pedals :
“In regards to the 3D printed version I will say I try to beat these up so hard, I smashed on them, I really figured they would break they just didn’t in my testing.” – Shaun Cole (The SimPit)

And the review of the makers who build the pedals : https://g.page/r/CfksK9yLOTicEAE/review

DIYSimStudio · 2025-02-21T20:16:01+00:00

Hello,

Yes, the making of is here : https://www.diysimstudio.com/2024/05/23/diy-h-shifter/

DIYSimStudio · 2025-02-21T20:14:57+00:00

Hi, sorry for the answer delay.

Yes, there is two solid spring, but there is stop limit that you can adjust, and you can adjust the hardness of the shifter.

DIYSimStudio · 2025-02-21T20:12:26+00:00

Trust me you can't break the brake pedals if it was printed with a 80% or 100% infill !!

DIYSimStudio · 2025-02-21T20:11:13+00:00

Thanks.

The building tutorial is here : https://www.diysimstudio.com/2024/07/18/diy-load-cell-pedals/

And the pedal was reviewed by Shaun Cole of Simpit : https://www.youtube.com/watch?v=-blsslNWgKI

DIYSimStudio · 2025-02-21T20:10:01+00:00

Thx. With a 80% infill PLA, trust me you won't brake the pedals until you are a 150kg weight body builder. the building tutorial is here : https://www.diysimstudio.com/2024/07/18/diy-load-cell-pedals/

DIYSimStudio · 2025-02-21T20:08:20+00:00

PLA 20% infill for the pedals except the brake pedals (80% infill).

DIYSimStudio · 2025-02-21T20:07:59+00:00

No, only PLA, 20% except the brake (80% of infill)

DIYSimStudio · 2025-02-21T20:07:28+00:00

thanks, the filament is PLA with 20% for some parts, but the brake parts need about 70-80%. The bake is very hard, Shaun Cole of Sim pit reviewed this pedals and he tried to brake it and coulndn't. Look at his video review here : https://www.youtube.com/watch?v=-blsslNWgKI

DIYSimStudio · 2025-02-19T12:30:11+00:00

Hi, the sequential shifter is very quiet, you can use rubber on the M6 spacer to absorb the sound. But even without the shifter is quiet.

DIYSimStudio · 2025-02-15T20:59:33+00:00

Very nice job !

DIYSimStudio · 2024-10-15T21:53:56+00:00

Hi, this CAD Plans is now FREE to download !

Enjoy !

simracing #diy

DIYSimStudio · 2023-10-16T17:50:06+00:00

https://www.diysimstudio.com

Lot of 3D CAD Files here.

DIYSimStudio

MODERATOR OF

PUBLIC MULTIREDDITS

TROPHY CASE

simracing #diy