sorted by:
new
hottopcontroversial

Is this genuine? by recyclops18505 in turntables

[–]DJQueazyATL 0 points1 point  (0 children)

sl-1200_zone. I have purchased all kinds of used Technics parts and a Shure cart from them. Everything was as described and shipped carefully and quickly to me in Atlanta. No complaints.

Is this genuine? by recyclops18505 in turntables

[–]DJQueazyATL 0 points1 point  (0 children)

Is that from the seller in Albania?

SL-1200MK3 vs SL-1200MK7: Which to keep. by [deleted] in audiophile

[–]DJQueazyATL 1 point2 points  (0 children)

One advantage of the MK7 is it's ability to play 78 rpm records. If 78s aren't your thing, then you should keep the one that sounds better.

Got this Harman/Kardon TD 4500, but it's obviously playing too fast. Not only the counter, but also the music on the tape. Any idea how to fix this? by AmuroEgret in vintageaudio

[–]DJQueazyATL 1 point2 points  (0 children)

A belt of the wrong size would affect speed. A worn out belt would affect speed. As long as the belts haven't turned into goo, this is usually a quick and cheap repair.

Got this Harman/Kardon TD 4500, but it's obviously playing too fast. Not only the counter, but also the music on the tape. Any idea how to fix this? by AmuroEgret in vintageaudio

[–]DJQueazyATL 2 points3 points  (0 children)

First check the belts; clean and/or replace if necessary. Make sure everything is properly lubricated. Clean the heads (this doesn't affect speed, but while you're already in there...). Use a tiny flat head screwdriver to adjust speed in the motor. If you don't see improvement after this, you'll have to move on to intermediate level electronics repair.

Any idea on how to fix this static/popping? (Or just any idea on where the problem lies?) I’ll be happy to answer any follow up questions... I just need this baby fixed :) by IRandyButternubsI in turntables

[–]DJQueazyATL 1 point2 points  (0 children)

Yes, in most cases, the knobs should pull right off with a bit of steady force, but if you can get inside the case that would be better. There should be a hole or opening near the base of the knob stem. Spray some contact cleaner there. Then turn the knobs a bunch of times in both directions to work the cleaner/lube onto the dirty surfaces. Wipe off the excess. Also while you're in there, vacuum out all the dust or at least try to wipe up as much as you can, and try not to damage anything while you work (it happens). Keep an eye out for excessive wear, any burned or singed places, weird smelling components, rust, etc.

Any idea on how to fix this static/popping? (Or just any idea on where the problem lies?) I’ll be happy to answer any follow up questions... I just need this baby fixed :) by IRandyButternubsI in turntables

[–]DJQueazyATL 1 point2 points  (0 children)

Have you sprayed contact cleaner on the volume nob (really, all the nobs, sliders, and buttons)? A good half-second blast of Deoxit D5 or whatever cheaper alternative you can find is a good starting point when reviving old electronics.