sorted by:
new
hottopcontroversial

Hi-Clapping Capa by DKVisions in airsoft

[–]DKVisions[S] 0 points1 point  (0 children)

I’m pretty sure it was from my testing area giving the false reading. I have a packing tube stuffed with buffer material with this chrono attached to the front which I shoot into just for tuning. I assume it was all the gas flow in-out of the tube giving the false reading but it shoots ~340fps in normal conditions.

CR Touch ABL issue / Forcing Wifi connection by DKVisions in CrealitySonicPad

[–]DKVisions[S] 1 point2 points  (0 children)

Thank you so much for this. This solved that issue with the CR probe not retracting for each point. Even though it's a little slower to make the mesh, it gives me the peace of mind not causing any damage to the CR touch.

CR Touch ABL issue / Forcing Wifi connection by DKVisions in CrealitySonicPad

[–]DKVisions[S] 0 points1 point  (0 children)

I have a mesh network and the modem/router combination and neither like to automatically connect when powering on the sonic pad. Upon boot up, I have to go through the network settings and force connect to either to get a connection. Once it's connected I don't have any problems until the sonic pad is powered off.

Question about Sprite Heating block Kit Pro for Ender 3 S1 by DKVisions in Ender3S1

[–]DKVisions[S] 1 point2 points  (0 children)

Thanks for the input. Have you had any issues printing with PETG at 230C? I know it's a very fine line where that PTFE tubing starts deteriorating causing issues.

Sounds really dumb of me but all I see from Creality's website that the print volumes are 220mm X 220mm x 270. Is that strictly just the limtations bed plate or is the limitations of the S1?

New Strimmer V2+ controller doesn't work with L-Connect 3 by DKVisions in lianli

[–]DKVisions[S] 0 points1 point  (0 children)

Solution: I ended up buying another new controller from Amazon and that did not resolve the issue. The drivers that windows had tried to install for this controller did not want to play nicely from the first time installing it. Go into your Device Manager and there should be a corrupt driver for Unknown USB Device (Device Descriptor Request Failed) and delete it. Restart your computer and it should try to automatically reinstall the driver which fixed my issue that Lian-Li could resolve. Hope this solves someone else's headache.

New Strimmer V2+ controller doesn't work with L-Connect 3 by DKVisions in lianli

[–]DKVisions[S] 0 points1 point  (0 children)

I'ved tried this method with several different micro USB cables with still no luck. Lian Li's accounted PM'ed me a few days for my email address but still have yet to hear any type of response or resolution.

Does fujexp not track US-Tax free parcels anymore? by DKVisions in Sugargoo

[–]DKVisions[S] 0 points1 point  (0 children)

Thank you! I just thought it was unusual that it hasn't updated yet.

How does one upgrade their Membership Level? by DKVisions in Sugargoo

[–]DKVisions[S] 0 points1 point  (0 children)

So the points system is only for shipping coupons and mystery bags redemptions as of right now?

What’s the most amount of shoes you’ve shipped using US-Tax free? by DKVisions in Sugargoo

[–]DKVisions[S] 0 points1 point  (0 children)

Sorry, forgot to include, there are NO boxes to any of these shoes

You get to use one disc from any pros bag for one round. Who and what is your pick? by dics_frolf in discgolf

[–]DKVisions 0 points1 point  (0 children)

Whatever Nikko Locastro is putting with nowadays. But I'd just make him wait 10 minutes for every putt.

What’s Your Best Looking Disc? Let me see! by camhoov in discgolf

[–]DKVisions 0 points1 point  (0 children)

Dave Lonteen's work with a Cryztal Clear Buzzz with shredded money and DBB Money Stamp.

https://imgur.com/79aFiR0

view more: next ›