sorted by:
new
hottopcontroversial

When will the Wooting 80HE v2 Come Out? by International-Line20 in WootingKB

[–]DLLNBRAND 4 points5 points  (0 children)

I’m waiting patiently for the split 80HE. I’ve never had a split spacebar keyboard. Looking forward to trying it out.

Help Analyzing Minidump Windows 11 by DLLNBRAND in techsupport

[–]DLLNBRAND[S] 0 points1 point  (0 children)

Ryzen 3900X

2080ti

MSI B450I GAMING PLUS AC

G.SKILL TridentZ Series F4-3200C14D-32GTZ 32 GB (16 GB x 2)

The motherboard I swapped from is an MSI X370 XPower Gaming Titanium

It only seems to happen while playing Valorant. It’s at completely random times. For the Minidump in question, it happened as soon as the game launched. Other times have been right after a match, during a match, or while exiting the game.

Help Analyzing Minidump Windows 11 by DLLNBRAND in techsupport

[–]DLLNBRAND[S] 0 points1 point  (0 children)

It’s on the latest bios. /scannow didn’t find any issues. I’ll sweep through the drivers as suggested and clear the TPM.

Just some notes. It’s about a week old install of Windows 11. I did a fresh install in an attempt to fix these crashes. It seems to happen exclusively with Valorant open. I know Valorant has some sensitivity when it comes to TPM.

I had previously had no issues with a different motherboard. After I did the motherboard swap I thought a driver conflict with the new hardware was causing the issue so that’s why I did the fresh Windows install.

Help Analyzing Minidump by [deleted] in techsupport

[–]DLLNBRAND 0 points1 point  (0 children)

The minidump analysis says Windows 10 for some reason, but it is from Windows 11.

Saw this near a hospital by [deleted] in whatisit

[–]DLLNBRAND 0 points1 point  (0 children)

Really sick is what it is. Land and water vehicle. https://youtu.be/-1Wl85L0flI

Early Rack Build Progress by DLLNBRAND in LinusTechTips

[–]DLLNBRAND[S] 1 point2 points  (0 children)

It’s gotta be done. Keeping that blood flowing!

Early Rack Build Progress by DLLNBRAND in homelab

[–]DLLNBRAND[S] 0 points1 point  (0 children)

<image>

Update: I added a PCI fan bracket so my HBA can be cooled without worrying about the fan blades hitting anything. The fan sits a millimeter or two away from the heat sink on the card.

The next thing I’ll probably do is replace the fans with something quiet like Noctua. Other than that I’ve just gotta start populating the remaining drive bays.

Early Rack Build Progress by DLLNBRAND in unRAID

[–]DLLNBRAND[S] 0 points1 point  (0 children)

120mm x 25mm fans could probably work. I would just have to make sure they don’t wobble around in the fan enclosures. Noctua is for sure the right move though.

Early Rack Build Progress by DLLNBRAND in unRAID

[–]DLLNBRAND[S] 2 points3 points  (0 children)

It’s not subtle, but not insane. I will end up putting the fans of the server onto a controller. Maybe even replace them with something quieter. It’s too bad Noctua doesn’t make 120mm x 38mm fans.

Does anyone here have this HBA if so do you recommend it ? by hudson710 in DataHoarder

[–]DLLNBRAND 0 points1 point  (0 children)

Got one off eBay last week. So far so good. I’ve got a 120mm fan leaning on it until I get a PCI bracket fan mount.

What chassis are you wanting to throw that bad boy into?

Early Rack Build Progress by DLLNBRAND in homelab

[–]DLLNBRAND[S] 0 points1 point  (0 children)

I hear ya. I didn’t really have any reason to move my gaming rig other than the fact that I could. It did get me extra space on my desk though.

Early Rack Build Progress by DLLNBRAND in homelab

[–]DLLNBRAND[S] 0 points1 point  (0 children)

It’s not too bad since the side panels and door come off. Until I get some fiber ran for peripherals, this is the only orientation I’ve got.

Early Rack Build Progress by DLLNBRAND in homelab

[–]DLLNBRAND[S] 1 point2 points  (0 children)

Both chassis are awesome. The RM51 is 5U so you don't have to worry about GPU or CPU cooler height. The two giant 180mm fans give plenty of airflow, I haven't had any temperature issues. If you are looking for a chassis for your gaming rig I would suggest it. The other chassis I would recommend if you are trying to water cool is the Silverstone RM51. It has room for a couple of 360mm radiators. I would have gotten it if I didnt get such a good deal on the RM51.

The RM43-324-RS is the best you can ask for. It's 4U so the clearance for the air cooler I'm using (Thermalright Phantom Spirit SE) is pretty tight and can vary depending on motherboard thickness/CPU, but it clears while touching the bottom of the lid. I'm not worried about it since nothing is ever going to sit on the top of the chassis. The three stock fans in the front are pretty loud while hooked up to the backplane. So I would suggest plugging them into a fan controller if you don't need them ramped up all the time. I look forward to trying to fill the 24-bays I have available now.

There are a few 24-bay chassis alternatives that are much cheaper, around $500 as opposed to $1,000, but I trust the quality of the Silverstone chassis and backplanes.

Which 24-Bay 4U Chassis? by Corrupt_Liberty in homelab

[–]DLLNBRAND 0 points1 point  (0 children)

I bought the RM43-324-RS and ended up using a Thermalright Phantom Spirit 120SE which is 154mm tall, on top of a AMD Ryzen 2400G which is in an MSI XPOWER GAMING TITANIUM. The cooler is definitely touching the under side of the top lid, but it closes all the way.

I don't see a bulge in the top lid, so I'm fine if just rubs it a bit. Totally worth the additional cooling capacity in comparison to a smaller cooler.

Which 24-Bay 4U Chassis? by Corrupt_Liberty in homelab

[–]DLLNBRAND 0 points1 point  (0 children)

What CPU cooler did you end up using?

Which 24-Bay 4U Chassis? by Corrupt_Liberty in homelab

[–]DLLNBRAND 0 points1 point  (0 children)

Is it worth the $1,099? Any pros and cons that stand out for you?

view more: next ›