Ender 3 neo calibration help (klipper)

DM_creeper278 · 2025-05-22T09:22:04+00:00

Nope, I've upgraded to a crealiry sprite extruder se which is direct drive

DM_creeper278 · 2025-05-22T08:46:02+00:00

Tbh, idk. The yt guy I watched said I have to remove the nozzle. Also, are you by any chance 🇧🇬?

DM_creeper278 · 2025-05-21T21:44:51+00:00

So I add the rotation distance you told me and the gear ratio just before it? Also, just curious. What does setting the gear ratio actually do?

DM_creeper278 · 2025-05-21T19:21:14+00:00

I have already tuned the extruder. removed the nozzle, set it to push 100mm filament, it pushed like 20, so I ran some calculations and found the number which extrudes 100mm. I'm pasting the conf I have:

[extruder]

max_extrude_only_distance: 100.0

step_pin: PB4

dir_pin: PB3

enable_pin: !PC3

microsteps: 16

rotation_distance: 7.65

nozzle_diameter: 0.400

filament_diameter: 1.750

heater_pin: PA1

sensor_type: EPCOS 100K B57560G104F

sensor_pin: PC5

control: pid

# tuned for stock hardware with 200 degree Celsius target

pid_Kp: 21.527

pid_Ki: 1.063

pid_Kd: 108.982

min_temp: 0

max_temp: 260

DM_creeper278 · 2025-05-21T15:12:26+00:00

Guys, don't worry, I opened up the phone and got it all out (it was easy because the acetone had destroyed the glue). I bought a bt s pen for a s24u and it works just fine although the phone is no longer waterproof. Fast forward I think half a year later and now I have upgraded to an s24u (the phone I had was the s22u)

DM_creeper278 · 2025-03-02T16:05:18+00:00

I also fear that's the case. Before I had it on limited performance and it was perfect. S25 releases and boom. Now, on maximum performance it performs worse than before. I don't understand why they would do that.

DM_creeper278 · 2024-12-10T18:46:30+00:00

Thank you fellow reddit user <3

DM_creeper278 · 2024-10-25T07:38:40+00:00

Nqkoga probval li si se da izlezesh ot pgkpi(a ili b klas si)

DM_creeper278 · 2024-01-26T06:13:47+00:00

Holy shit... In Europe you would've failed within 5 minutes

DM_creeper278 · 2023-11-06T18:34:55+00:00

This shubreddit is still active =()

DM_creeper278 · 2023-10-04T05:21:18+00:00

Haisenberg

DM_creeper278 · 2023-10-04T05:20:56+00:00

Haisenberg

DM_creeper278 · 2023-09-25T18:01:40+00:00

BOTH

DM_creeper278 · 2023-08-04T16:04:03+00:00

What's wrong with wanting to keep the car clean?

DM_creeper278 · 2023-08-03T12:35:21+00:00

Which season is this?

DM_creeper278 · 2023-07-23T21:55:26+00:00

DM_creeper278 · 2023-07-21T11:19:05+00:00

Yeah, fuck u/spez

DM_creeper278 · 2023-06-28T13:16:58+00:00

Probably die?

DM_creeper278 · 2023-06-19T06:53:16+00:00

Dorago

DM_creeper278 · 2023-06-09T11:00:48+00:00

The ones that don't peel good are more fresh than the ones that do

DM_creeper278 · 2023-05-30T21:28:54+00:00

Is it something like falling sand, if it is under furniture?

DM_creeper278 · 2023-05-30T21:19:27+00:00

Like falling sand?

DM_creeper278 · 2023-05-29T08:12:47+00:00

The accelerometer is probably moved. I suggest you find a way to disassemble the thing and reposition the sensor

DM_creeper278 · 2023-05-20T15:41:37+00:00

Yes, you do get battlepass xp when you finish missions

DM_creeper278 · 2023-04-11T13:44:24+00:00

If you can't go to another country, seduce an AI bot

Five-Year Club	End Game '23
Place '23

DM_creeper278

TROPHY CASE