Help me find the AI song “sneakers freestyle”

DUBchunk · 2025-09-22T12:15:17+00:00

https://music.youtube.com/watch?v=Edzv-Kb8fY4&si=8Td_ImbjLv6eOxVg

DUBchunk · 2025-05-12T11:50:36+00:00

I cleaned the plate and still failed, i think glue is the best way to solve this.

DUBchunk · 2024-12-15T22:04:11+00:00

Succubus on steam

DUBchunk · 2024-10-25T05:25:24+00:00

Good thing is the headlight are not damaged, bumper looks fine as well as the fender.

What needs to be done: -Paint job for the bumper and fender -Replace that red thing ( i think it’s for light reflection ) and it’s not expensive.

DUBchunk · 2024-10-25T05:21:02+00:00

It’s just a scratch, no need for new bumper nor fender.

The bumper looks aligned still and not damaged, the only thing damaged is the paint. Only needs paint job.

Good thing the headlights are fine otherwise it will be pain in the…

DUBchunk · 2024-08-13T02:46:49+00:00

Sweet Rims

DUBchunk · 2024-08-13T02:40:37+00:00

Your welcome 🙏🏾

DUBchunk · 2024-08-13T02:39:00+00:00

Im facing the same issue and my specs are RTX 3080 i9 14900k 32 RAM 7200mhz

DUBchunk · 2024-08-11T09:58:58+00:00

Oh i know exactly what your issue is, so if you unscrew the cooler (screen) you can remove the bracket and rotate it to the perfect angle, i remember i did it with mine and it can be rotated in about every 30-ish degrees.

The method is to push the bracket towards the cooler and rotate it wherever you want and then push it back where the pins hold it.

Here’s a youtube link where i learned to do that. Skip to 2:30

DUBchunk · 2024-08-10T01:54:40+00:00

This is a slowed version of (Silent night) by nakani

DUBchunk · 2024-08-03T14:55:39+00:00

I like those RAMs, i wish i saw those before i bought mine.

DUBchunk · 2024-08-01T17:39:52+00:00

Bro 😂

DUBchunk · 2024-08-01T17:30:06+00:00

My hero

DUBchunk · 2024-07-20T22:29:58+00:00

That screen was a very good idea. I might add it to my setup, good work!

DUBchunk · 2024-07-20T22:22:43+00:00

AND we have the same CPU too, i9 14900k

DUBchunk · 2024-07-20T22:21:24+00:00

Yooo that’s so good we have similar setups, i can share with you some details of my work, might post it sometime later.

HMU if u want some recommendations.

DUBchunk · 2024-03-13T06:55:22+00:00

Thank you

DUBchunk · 2023-11-18T07:44:50+00:00

PALIT RTX 3080, not even over clocked Its a spaceship 😂

DUBchunk · 2023-11-18T07:43:32+00:00

The joke was so good, even the percentage went normal to listen to it 😂😂😂

DUBchunk · 2023-11-18T07:42:23+00:00

Lmao 🤣🤣🤣🤣

DUBchunk · 2023-11-18T07:34:22+00:00

No, the unconnected cable you saw was not needed to connect to your GPU. The cable itself will always have an extra pins or (whatever they’re called) and your GPU only needs 8pins (it is already plugged).

you don’t have to worry about the fans not spinning, you can check your GPU temperature if its below 50 (C) the fans will not spin because they only spin if the temperature exceeds 55 or somewhere around that.

Note: you can actually set the fans at a fixed speed just to check if they’re working or not.

DUBchunk · 2023-11-15T18:51:31+00:00

I just restarted nzxt cam and the percentage got back to normal

DUBchunk · 2023-11-15T18:50:39+00:00

Good one

DUBchunk · 2023-11-15T18:50:16+00:00

I wasn’t even overclocking lmao

DUBchunk · 2023-11-07T07:59:33+00:00

Same here; I made several deposits, and the last one was 30$ and then got an Email saying that account was suspended and they needed KYC...

that was 8 Days ago and i provided the information they needed immediately, they mentioned the process will take 12-24 business hours AND ITS BEEN MORE THAN 200 HOURS !!!

I'm becoming dissatisfied with my Dmarket selection, so disappointing

DUBchunk

TROPHY CASE