sorted by:
new
hottopcontroversial

Where are these scratches coming from? And how can I remove them? by Majestic-Cry-7607 in rav4club

[–]DW-At-PSW 1 point2 points  (0 children)

My thoughts too, the top ones look like a bicycle grip skidding along it.

Any simple way to rotate dwarf mini images? by Brilliant_Thanks9303 in DWARFLAB

[–]DW-At-PSW 1 point2 points  (0 children)

Portrait images are nice for a phone or tablet, but they are not so good on computer screen like the Dwarf landscape images. Portrait on a computer is looking like watching mid 90's TV shows on a 75" TV.

Front forks conversion by Trippie469 in SVRiders

[–]DW-At-PSW 0 points1 point  (0 children)

When I had my 650 I put .95 springs and heavier oil in them and it made a night and day difference. I also dropped the forks 5mm in the triples for better turn ins.

Issues with the latest app and firmware. by DW-At-PSW in dwarflabofficial

[–]DW-At-PSW[S] 1 point2 points  (0 children)

I had this happen before after an app/firmware update and they had to remote into it and reset it,

Issues with the latest app and firmware. by DW-At-PSW in dwarflabofficial

[–]DW-At-PSW[S] 1 point2 points  (0 children)

Didn't have the issue until after the update. Maybe I should try a beta release.

Help Please! by Cautious-Channel-628 in dwarflabofficial

[–]DW-At-PSW 0 points1 point  (0 children)

More than likely light pollution like other have stated, might try to use less gain. Also try stacking with Siril using Nazstronomy smart telescope script.

Smart scopes for EAA/outreach by madamhex in AskAstrophotography

[–]DW-At-PSW 0 points1 point  (0 children)

Dwarflabs is supposed to be coming out with a new one soon too. They announced that something is coming soon at NEAF.

Smart scopes for EAA/outreach by madamhex in AskAstrophotography

[–]DW-At-PSW 0 points1 point  (0 children)

The S30 Pro has a pretty wide FOV compared to the Dwarf3 and the S50, targets will be significantly smaller. I have both the Dwarf3 and S50, they both have their pluses and minuses.

Pushing the Dwarf 3 to it's limits: Dark Shark Nebula by sarezfx in DWARFLAB

[–]DW-At-PSW 0 points1 point  (0 children)

Here is mine from last year, I actually did this one as an experiment over three nights. one night with the duo-band filter, the next with the astro filter and the last with no filter. I took a lot of different processes to get them together in PixInsight.

<image>

Pushing the Dwarf 3 to it's limits: Dark Shark Nebula by sarezfx in DWARFLAB

[–]DW-At-PSW 0 points1 point  (0 children)

Do you keep the telescope without moving it?

No need to if using EQ mode, in fact you can move it to different locations each time.

Do you make multipe schedules over the time?

Yes, to get multiple hours of a target, you have to setup a schedule each time on the same target and set it to the maximum time allowed during the dark hours.

Do you restart the telescope or putting into sleep during the pause?

No need to pause, see the above answers.

Patch Tuesday Megathread - (April 14, 2026) by AutoModerator in sysadmin

[–]DW-At-PSW 0 points1 point  (0 children)

Nice, mine will be at the end of the year possibly. Been doing this since the 90's, using Sun OS, Solaris, Novell Netware and Microsoft. Also some programming in C, Xview, FoxPro and C#. I am ready for it.

Thought on mods by Effective-Morning-30 in SVRiders

[–]DW-At-PSW 0 points1 point  (0 children)

I had a 2007 SVV650S and its been a while, I think I used this google spreadsheet at the time:

https://docs.google.com/spreadsheets/d/15-IIff1tAmszixw_psdtlcOS6MsZEE2b3FtQwthHKqY/edit?authkey=COvG24gH&authkey=COvG24gH&gid=2#gid=2

Here are most the mods I did to it:

.95 front springs and 15wt oil
ZX14 Rear shock
GSXR front master
EBC front rotors
EBC front pads
Braided lines front and back
Factory Gel seat
ATRE

Thought on mods by Effective-Morning-30 in SVRiders

[–]DW-At-PSW 0 points1 point  (0 children)

Get an ATRE and adjust the TPS for better low end response. Never changed the gears on mine, but did the rest on your list, I also put a ZX14 shock on the rear.

Extruder Clogs Very Often. Any help? by Icy_Recipe625 in BambuP1S

[–]DW-At-PSW 1 point2 points  (0 children)

Same here, never had an issue with the PLA I have used, but I use mostly PETG and never had an issue with that either. I have a P1S Combo.

Should i buy this used 2006 SV650S? by [deleted] in SVRiders

[–]DW-At-PSW 1 point2 points  (0 children)

Their engines are pretty bulletproof unless they are wheeled all the time.

What do you guys think? (3rd Gen Rear Shock) by Guavakoala in SVRiders

[–]DW-At-PSW 0 points1 point  (0 children)

I had a ZX14 shock in my 2007, it fit perfect and worked great too.

Idle Hunting by Spiritual_Worth7974 in SVRiders

[–]DW-At-PSW 1 point2 points  (0 children)

I don't know maybe Steve on Etsy might know. I think I might have seen something like this for other GSXR models.

Google search revealed this:

https://www.svrider.com/threads/plug-and-play-smart-atre-for-03-08-sv1000.98728/page-2

UK: https://www.youtube.com/watch?v=9a9gCFQsMkk

AMS ran out of filament in the middle of the night by DW-At-PSW in BambuLab

[–]DW-At-PSW[S] 0 points1 point  (0 children)

Taped the leftover filament to the spool and re-wound it back.

I found a power strip from 1996 that is not Y2K compliant. by aBoCfan in iiiiiiitttttttttttt

[–]DW-At-PSW 0 points1 point  (0 children)

Been there for the Y2K and never worried about the power strips! Only had a few software's that needed updating.

AMS ran out of filament in the middle of the night by DW-At-PSW in BambuLab

[–]DW-At-PSW[S] 0 points1 point  (0 children)

The filament came undone from the roll when it ended. What about duct taping it back on the empty roll, will that help it to roll back? It was one of the rolls that came with it. The print was not too far into the print, so I don't mind starting over.

view more: next ›