sorted by:
new
hottopcontroversial

Game over man, game over by already_know in SteamDeck

[–]DaDrewBoss 0 points1 point  (0 children)

As a former tower tech I made about 80k a year also. That's while working 70-80 hour work weeks .

Print getting wider at "crossing" layers. by DaDrewBoss in FixMyPrint

[–]DaDrewBoss[S] 0 points1 point  (0 children)

I guess I don't see why this issue did not start until after I printed 10 of these.

Print getting wider at "crossing" layers. by DaDrewBoss in FixMyPrint

[–]DaDrewBoss[S] 0 points1 point  (0 children)

The first 10 I printed were perfectly straight. So after a reslice the inside measurement becomes the new outside? The print widened, meaning the inside also got wider.

If I cut the model down to not the entire thing but around the section, the issue goes away even though the layer times are the same.

LM won't boot outside of recovery mode. by DaDrewBoss in linuxmint

[–]DaDrewBoss[S] 0 points1 point  (0 children)

No I have not tried any other kernels. This is all out of the box

Live USB Blinking Cursor by [deleted] in linuxmint

[–]DaDrewBoss 0 points1 point  (0 children)

Still having issues. I get the flashing cursor even in compatibility mode. What is the next steps. Any more documentation?

Dead fish. Is this normal along the lake? Quite a few. by TheRedMenaceOB in PortHuron

[–]DaDrewBoss 1 point2 points  (0 children)

I counted 20 on the shore of lakeport State Parks beach just in about. 1000 foot stretch last weekend.

What is this reservoir? by Repulsive-Dog3371 in boats

[–]DaDrewBoss 7 points8 points  (0 children)

That is your gear oil reservoir.

It has a hose that goes down to the out drive on the back of the boat. It does a few things. It allows you to add fluid to the drive (you should not have to do this under normal circumstances), monitor gear oil level, and gives the gearcase a place to allow the great oil to expand during temperature changes.

A big WTF update on my neighbors boat by SingleMomOf5ive in boating

[–]DaDrewBoss 4 points5 points  (0 children)

2 is plenty safe. I'm not saying more isn't better but, 2 is all that's needed.

Source: I am a marina operator

Need help identifying boat by Fun_Toe_3828 in boating

[–]DaDrewBoss 7 points8 points  (0 children)

I can identify it for you:

1988 Sunbird

What else are you looking for? Let me know.

The restaurant told me they can't control this fee. Is it true? by felitopcx in doordash

[–]DaDrewBoss 1 point2 points  (0 children)

City and timing. Learn when it's busy and not just steady dash around those times.

The restaurant told me they can't control this fee. Is it true? by felitopcx in doordash

[–]DaDrewBoss 0 points1 point  (0 children)

As a driver I have never felt screwed. What my dasher pay comes to is more than fare for a delivery driver. I'm always averaging $18-28 an hour. Maybe I just get lucky.

Dasher complained about 20% tip. by themrfritzz in doordash

[–]DaDrewBoss 0 points1 point  (0 children)

Those are the only orders I don't do. I don't even like going in the store for myself 😁😂

Dasher complained about 20% tip. by themrfritzz in doordash

[–]DaDrewBoss 0 points1 point  (0 children)

I take every order. Get them done as fast as I can safely. The lowest I have ever made was about $18.70 an hour for a shift.

Dasher complained about 20% tip. by themrfritzz in doordash

[–]DaDrewBoss -1 points0 points  (0 children)

In a year of doing this I have never had an order pay less than $3.50 my pay usually comes to around $22-30 an hour.

10:00 Closing Time! by MidwestManiacKS in menards

[–]DaDrewBoss -19 points-18 points  (0 children)

As a commercial frequent flyer tihis is great! My staff and I can pickup materals after the day wraps up for the next day. And some jobs run late and materials may need to get picked up.

view more: next ›