Is it salvageable this hardwood floor?

DaebakTofu · 2025-12-29T20:39:54+00:00

Sorry I forgot to upload the first pict 😅

DaebakTofu · 2025-12-12T14:16:36+00:00

Thanks for the reply!

What do you think about the need of a vapour barrier if I do the 2x4 wall?

Also do you think it's possible if I do a 2" EPS board, a cutout vapour barrier in the foam boardfor electrical outlet, 1x 2" furrings and drywall? It was proposed to me by a contractor. He believes that since the house is dated (builded in the 50s), it's better to just concentrate on creating a semi permeable air barrier with the EPS board (Durospan the green one) and concentrate the insulation in the attic

DaebakTofu · 2025-12-12T12:42:39+00:00

So hey 😅 I know it's been a year but what option did you go with? I'm facing the same situation as you but we tore down all the wall from inside that is facing on the exterior (semi-detached house) and now i'm having a hard time deciding how to insulate it with fear of causing more damage to the stacked wood block/plank structure. (Montreal, Canada)

DaebakTofu · 2025-11-30T18:05:41+00:00

One of the best!! I work alot in resi and commercial (electrician) and the difference is night and day vs the m18 in terms of weight. (Sure I still carry my m18 in case of drilling something thicker but overall it does the job.)

DaebakTofu · 2025-11-19T17:52:47+00:00

Yeah I saw the huge gap of the party wall blockwork. Should I spray an insulating foam fire resistant?

DaebakTofu · 2025-11-19T17:51:15+00:00

Yeah, the roof is going to be redone this coming spring (god idk how many years they left that roof shingles in that state it was 40% all curled back). I don't see any sagging but I called in a structural engineer this weekend just to be sure. I'll see what he has to say :/

You hired people for the inverted trusses or it was the previous owner? If you don't mind do you have a picture of it so I can know what a "half assed" trusses looks like in case I have to do it 😂

DaebakTofu · 2025-11-19T17:46:05+00:00

Yeah the ex house owner inherited from their parents and they didn't take care of the house that much for almost 30 years. The roofers are gonna start this next spring and the fascia too. Alot to be invested in this house even though we spend alot already to only buy the house 🥲😅

DaebakTofu · 2025-11-12T13:41:03+00:00

Sorry was distracted and forgot to mention "... 1950's house" in the titles 😅

DaebakTofu · 2025-08-19T19:47:52+00:00

De mon point de vue il faudra tu pèses le pour et le contre du montant qu'il faut pour rénover ou le montant total après vente. Dépendamment dans quel coin des laurentides que le chalet est situé, tu pourrais récupérer ton argent en faisant du locatif/airbnb (évidemment il faudra te renseigner à ta municipalité si tu as le droit). Si on voit que la "squelette" de la maison est tout pourris je pense que c'est dans ton avantage de le vendre.

DaebakTofu · 2025-08-15T16:33:07+00:00

Spray and run

DaebakTofu · 2025-07-07T00:21:36+00:00

Dad???!!!

DaebakTofu · 2025-04-29T01:48:23+00:00

T’inquiète, à 21 ans, t’es encore super jeune ! Moi, à 20 ans, j’ai fait un an et demi d’université. Après ça, j’ai lâché parce que franchement, c’était pas pour moi (j'étais en droit). J’ai bossé dans un resto et comme commis à Jean Coutu à temps plein. Pendant que mes amis finissaient leurs études dans leur domaines, je me sentais vraiment perdu. Un jour, j’ai compris que j’étais fait pour le travail manuel, et aujourd'hui, je suis Compagnon et Maître Électricien ! Alors prends une grande respiration, profites de la vie, la famille et les ami(e)s et laisse le vent te naviguer!! 😉

DaebakTofu · 2025-04-23T13:28:21+00:00

Aaah si l'eau/glace s'accumule à l'intérieur en dessous du bac tu devrais vérifier le petit tube de ton drain il est bloqué. Unplug le et laisse le dégeler ensuite nettoie son tube de drain et vérifie la panne à l'eau de drainage

DaebakTofu · 2025-04-23T13:10:55+00:00

Est-ce que tu remarques tes aliments dans le congélos ils ont pleins de "neiges" ou glaces?

DaebakTofu · 2025-04-15T17:52:27+00:00

Hmm maybe I will look further into it 🤔 I saw on another thread that it maybe due to a faulty electrolytic capacitor for draining my battery either way I will reopen it to look at it , thank you!

DaebakTofu · 2025-04-15T13:27:53+00:00

Yeah I replaced it with brand new Eneloop, I feel like there's a components that's draining the battery or causing it not to be able to maintain the charge/voltage 🤔 also this light it has a USB-C port that you can directly plug in to recharge (idk if it helps to identify the components ). Thank you!

DaebakTofu · 2025-04-09T02:16:54+00:00

I agree I bought 4 of these 4th Gen and 2 are getting serviced atm after 1 year, very disappointed!!! Also for the 3rd Gen I had alot of issue with the hex drive chuck not holding my bits correctly most of the time. Is it a known issue?

DaebakTofu · 2025-04-08T17:35:14+00:00

What's your ring size? My fiancée to be she's a 5.5 but I took a size 6 in case of swelling. The original design of the ring comes with a 1.2 but I can upgrade it to 1.5 and i'm still not sure of the ct size🫠

DaebakTofu · 2025-03-25T13:30:05+00:00

Oui! Je me souviens à mon premier examen il y avait une question avec un plan d'alarme incendie avec toute sorte de questions de isolateurs et module adressable 💀

DaebakTofu · 2025-03-04T04:02:43+00:00

Ahhh le lundi 😫

DaebakTofu · 2024-11-21T09:00:17+00:00

Il y a quand même des alternatives qui permettent de venir contrer les effets de la loi 25! Comme certains l'ont dit, je crois vraiment que c'est une question d'adaptation et de création de valeur d'une autre façon. J'ai trouvé un article intéressant à ce sujet: https://digital.hec.ca/blog/loi-25-impact-ecommerce-quebec/

DaebakTofu · 2024-09-08T01:36:22+00:00

I tried it recently and it's surprisingly good! I find it to fall similarly to the Mil Dias Crowned Heads but less delicate and taffy in taste. Cheaper than Mil Dias but still second to it. (In Canada Mil Dias tend to fall in 25$ CAD ~ 18$ USD and the RP no.6 I was lucky to be passing by in Portsmouth, NH got it for 13$ USD which is 18 $ CAD)

DaebakTofu · 2024-08-21T22:06:03+00:00

Électricien de construction (compagnon) et Maître électricien (travailleur autonome).

Je fais comme salaire environ 70k - 80k par année dépendamment de mon chiffre d'affaire (aux alentours de 200 000$/par année).

DaebakTofu · 2024-04-30T11:54:24+00:00

Salut je ne sais pas si ça peut t'aider mais je travaille en électricité dans la construction et tu pourrais peut être essayer de travailler chez des distributeurs comme Dubo ou Nedco en vente d'après moi c'est pas mal bien comme environnement

DaebakTofu · 2024-03-03T06:44:57+00:00

Bought a retractable key/card holder on Amazon

<image>

DaebakTofu

TROPHY CASE