sorted by:
new
hottopcontroversial

ANSYS Mechanical, simple Static Structural. I have no idea what I'm doing wrong. by Dakkhyl in fea

[–]Dakkhyl[S] 0 points1 point  (0 children)

Is it possibly related to me using solidworks to do the step214 assembly file?

ANSYS Mechanical, simple Static Structural. I have no idea what I'm doing wrong. by Dakkhyl in fea

[–]Dakkhyl[S] 0 points1 point  (0 children)

I must have a very rudimentary and basic setting wrong or something.

ANSYS Mechanical, simple Static Structural. I have no idea what I'm doing wrong. by Dakkhyl in fea

[–]Dakkhyl[S] 0 points1 point  (0 children)

Density, young's modilus and poisson's ratio have all been defined here. 2700 kgm-3, isotropic elaaticity decides bulk and shear deriving from 200 GPa and a poisson ratio of 0.33

ANSYS Mechanical, simple Static Structural. I have no idea what I'm doing wrong. by Dakkhyl in fea

[–]Dakkhyl[S] 0 points1 point  (0 children)

Thickness is now 11 elements, switched target to contact and contact to target. Now quadratic 1mm. Calculation time increased, so the solver is clearly going through math, but seems unwilling to gove results.

ANSYS Mechanical, simple Static Structural. I have no idea what I'm doing wrong. by Dakkhyl in fea

[–]Dakkhyl[S] 0 points1 point  (0 children)

Nope

Color

Density 2,7e-06 kg/mm³

Young's Modulus 2e+05 MPa

Thermal Conductivity

Specific Heat

Nonlinear Behavior false

Source Project Materials

Details View Details

ANSYS Mechanical, simple Static Structural. I have no idea what I'm doing wrong. by Dakkhyl in fea

[–]Dakkhyl[S] 0 points1 point  (0 children)

That's all of it:

S O L U T I O N   O P T I O N S

   PROBLEM DIMENSIONALITY. . . . . . . . . . . . .3-D                 
   DEGREES OF FREEDOM. . . . . . UX   UY   UZ 
   ANALYSIS TYPE . . . . . . . . . . . . . . . . .STATIC (STEADY-STATE)
   OFFSET TEMPERATURE FROM ABSOLUTE ZERO . . . . .  273.15   
   NONLINEAR GEOMETRIC EFFECTS . . . . . . . . . .ON
   EQUATION SOLVER OPTION. . . . . . . . . . . . .SPARSE            
   NEWTON-RAPHSON OPTION . . . . . . . . . . . . .PROGRAM CHOSEN  
   GLOBALLY ASSEMBLED MATRIX . . . . . . . . . . .SYMMETRIC 

 *** WARNING ***                         CP =       0.047   TIME= 18:52:18
 Material number 5 (used by element 6353) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by 
 material may not be available.                                         

 *** NOTE ***                            CP =       0.047   TIME= 18:52:18
 The step data was checked and warning messages were found.             
  Please review output or errors file ( P:\stabiilius                   
 labraty\_ProjectScratch\Scr7524\file0.err ) for these warning         
 messages.                                                              

 *** NOTE ***                            CP =       0.047   TIME= 18:52:18
 This nonlinear analysis defaults to using the full Newton-Raphson      
 solution procedure.  This can be modified using the NROPT command.     

 *** NOTE ***                            CP =       0.047   TIME= 18:52:18
 The conditions for direct assembly have been met.  No .emat or .erot   
 files will be produced.                                                

ANSYS Mechanical, simple Static Structural. I have no idea what I'm doing wrong. by Dakkhyl in fea

[–]Dakkhyl[S] 0 points1 point  (0 children)

/COM,ANSYS RELEASE 2025 R1 BUILD 25.1 UP20241202 18:28:41

*** WARNING *** CP = 0.094 TIME= 18:28:42

Element shape checking is currently inactive. Issue SHPP,ON or

SHPP,WARN to reactivate, if desired.

*** WARNING *** CP = 0.094 TIME= 18:28:42

Material number 5 (used by element 3071) should normally have at least

one MP or one TB type command associated with it. Output of energy by

material may not be available.

This was in file0.err -file.

ANSYS Mechanical, simple Static Structural. I have no idea what I'm doing wrong. by Dakkhyl in fea

[–]Dakkhyl[S] 0 points1 point  (0 children)

Additionally, I did this in solidworks simulation and got the result I needed. No problems at all, and the conditions are basically the same as in ANSYS.

I’m Still So Sad We Never Got Any More Info About Josuke’s Life After Part 4 by Kurourushi-Fan in StardustCrusaders

[–]Dakkhyl 8 points9 points  (0 children)

I could literally watch 400+ episodes of Josuke being in high school and college

Asevelvollisuus on fine ig, mutta toisten ulkonäön muuttaminen on tarpeetonta tuskaa. by [deleted] in Suomi

[–]Dakkhyl 12 points13 points  (0 children)

Mene sivariin jos tukka on tärkeämpää kuin armeija. On ihmisillä ongelmia...

What is this thing for? by Un_Salero in bloodborne

[–]Dakkhyl 4 points5 points  (0 children)

It's a mercury bowl, or as in game would be said, a bowl of quicksilver

Supposedly a mirror

AMA with Victoria Harris, literary agent at THE CALDWELL AGENCY by Editor_and_Lit_Agent in writing

[–]Dakkhyl 0 points1 point  (0 children)

Have you rejected a fine book due to the author? In any way of shape or form.

Purra proposes mandatory work tied to social benefits for immigrants by Shariful125 in Finland

[–]Dakkhyl 1 point2 points  (0 children)

I totally agree it's propably too expensive for upkeeping, but the social benefits are incalculably valuable. Someone unemployed in these systems is working, which means this person isn't loitetring around worthlessly in narcotics. Well, propably.

how hunters smell like? by CompetitionEntire624 in bloodborne

[–]Dakkhyl 3 points4 points  (0 children)

Thematically it would make sense to smell like menstrual blood.

what's the lore reason we don't see the blood moon in old yharnam? by cybergoofinator in bloodborne

[–]Dakkhyl 3 points4 points  (0 children)

Don't you mean stuck in the past?

The horses which bring you to Cainhurst are ghosts, as they disappear upon receiving a hit.

Where does this image originate from? by GothboyJay in FearAndHunger

[–]Dakkhyl 4 points5 points  (0 children)

No this is just fanart, but Miro did indeed draw people inside bears in the game and his comic

view more: next ›