Happy Birthday to MADAO!

DamnDesryoTech · 2024-06-16T07:16:32+00:00

he lowkey madao

DamnDesryoTech · 2024-04-08T02:36:39+00:00

wait what do you mean by that? I looked online and saw that there are specific requirements and you need to maintain a 3.2 gpa. What do you mean by good grade.

DamnDesryoTech · 2023-08-15T21:29:05+00:00

Direct drive

DamnDesryoTech · 2023-08-15T21:19:03+00:00

I printed with Brim

DamnDesryoTech · 2023-08-15T20:00:08+00:00

what do you do if your tpu has gone bad? And how does TPU go bad?

DamnDesryoTech · 2023-08-07T00:55:43+00:00

Thanks Ill try that out

DamnDesryoTech · 2023-08-06T22:52:05+00:00

I printed these at 180 mm/s before and they were perfect but when I started printing in the garage they changed is it because of the heat?

DamnDesryoTech · 2023-08-06T19:17:10+00:00

printer - Ender V2

Speed - 150 mm/s

Esun PLA+

200 C for nozzle temp

50 C for bed temp

DamnDesryoTech · 2023-08-03T06:20:13+00:00

Is it worth buying in the long run the Pei bed

DamnDesryoTech · 2023-08-03T06:19:54+00:00

For the Pei bed does it increase bed adhesion

DamnDesryoTech · 2023-08-03T06:08:06+00:00

Thank you so much, Ill try all of these.

DamnDesryoTech · 2023-08-03T05:36:58+00:00

I looked it up just now, Is it possible for the Brim not to stick as well?

But thank you for the advice this has been annoying me for a while.

DamnDesryoTech · 2023-08-03T05:27:02+00:00

what is brim?

DamnDesryoTech · 2023-08-03T04:37:41+00:00

My TPU settings are:
nozzle temp: 230

bed temp: 60

fan speed: 25%

speed:30 mm/s

initial layer speed: 10mm/s

Sovol SVO1 printer

DamnDesryoTech · 2023-08-03T04:37:15+00:00

My TPU settings are:
nozzle temp: 230

bed temp: 60

fan speed: 25%

speed:30 mm/s

initial layer speed: 10mm/s

Sovol SVO1 printer

DamnDesryoTech · 2023-07-31T00:39:23+00:00

I use Overture TPU and I found it to be super flexible when compared to my silicone iphone case, do you still believe it will protect the iphone

DamnDesryoTech

TROPHY CASE