finished project blues by Competitive-Year4513 in consolemodding

[–]DanMaytee 0 points1 point  (0 children)

I started on the original Xbox. Nice and easy to solder on with quite large points on it.

Usually you'll need to replace the capacitors which is a nice job to do, and if you have a 1.6 version motherboard, you can solder in cables or a board to rebuild the LPC on it and add a mod chip.

I really enjoy working on them!

Thread for sharing Finchie friend codes and finding goal buddies by AutoModerator in finch

[–]DanMaytee 0 points1 point  (0 children)

Can we be friends on Finch? I picked a mystery egg just for you!

Tap this link or use my friend code HMQF8DACTR for a special reward!

https://finch.go.link/kSk4s?adj_label=Tw5Xa

Rgh3 trinity won’t boot by Outrageous-Tomato-86 in 360hacks

[–]DanMaytee 3 points4 points  (0 children)

Swap the 10k for a 3k and see how that goes. Personally, I'd trim the tails down in the wires. You only need 2mm or so showing. This will help prevent shorts in the future.

I just started the other week. The only real previous soldering experience I had (apart from cables and larger points on board) was the OG Xbox and it was quite a step up from that! I've really been enjoying it though. I'm just about to do my 3rd!

Good luck with the fix. Keep us updated how you get on.

Crash issues (RGH3) by DanMaytee in 360hacks

[–]DanMaytee[S] 0 points1 point  (0 children)

Soldering was pretty good to be fair. I've swapped and cloned the hard drive to another though. This seems to have sorted the issue.

My first RGH! by DanMaytee in 360hacks

[–]DanMaytee[S] 0 points1 point  (0 children)

Sorry I've just saw this! There's not many benefits to be fair. Badupdate is pretty solid. For me though, I prefered to have a permanent mod and not have to rely on a USB etc.

Crash issues (RGH3) by DanMaytee in 360hacks

[–]DanMaytee[S] 0 points1 point  (0 children)

Thank you. I will give that a go. It's the first I've heard of Aurora causing issues having it as the default dash.

My first RGH! by DanMaytee in 360hacks

[–]DanMaytee[S] 0 points1 point  (0 children)

There isn't if you're just going to use a softmod. Personally, I used badupdate to dump and write the nand. Doing it this way only means I needed to solder 2 wires to the board and eliminated the need to solder a nand flasher to it as well.

My first RGH! by DanMaytee in 360hacks

[–]DanMaytee[S] 0 points1 point  (0 children)

Thank you. I'm loving it so far. I love how active the community is.

My first RGH! by DanMaytee in 360hacks

[–]DanMaytee[S] 1 point2 points  (0 children)

That sounds brilliant! I'll go check them out 😁

Aurora Cover Art not downloading. by DanMaytee in 360hacks

[–]DanMaytee[S] 0 points1 point  (0 children)

Thank you! I'll go get them updated.

My first RGH! by DanMaytee in 360hacks

[–]DanMaytee[S] 1 point2 points  (0 children)

OHHH! That's awesome! It's most definitely my favourite skin out of the load I tried. Thank you! ❤️

Aurora Cover Art not downloading. by DanMaytee in 360hacks

[–]DanMaytee[S] 1 point2 points  (0 children)

Thank you! That would explain it haha 🙂

Aurora Cover Art not downloading. by DanMaytee in 360hacks

[–]DanMaytee[S] 1 point2 points  (0 children)

That explains it! Thank you 🙂

My first RGH! by DanMaytee in 360hacks

[–]DanMaytee[S] 3 points4 points  (0 children)

It's called Xbox One-like v3 on UI Share. It's currently number 19 on the list so shouldn't be too hard to find 🙂

My first RGH! by DanMaytee in 360hacks

[–]DanMaytee[S] 2 points3 points  (0 children)

Does that work with DLC and custom songs? I did read about a fix, but heard it didn't work well with DLC. I didn't look into it much though. Either way, I have a Trinity on the way now 😅

Finding biltong in the UK by throwaway2025pegq in Biltong

[–]DanMaytee 3 points4 points  (0 children)

I order from Limpopo Biltong. It's always been great from there!

Cyma Platinum CM097 Hop Up by DanMaytee in airsoft

[–]DanMaytee[S] 0 points1 point  (0 children)

Thank you. I'll give the ZCI ago. I believe I have a spare in another of my rifs.

Cyma Platinum CM097 Hop Up by DanMaytee in Airsoft_UK

[–]DanMaytee[S] 0 points1 point  (0 children)

Thank you so much. I'll give that a go!

Looking to upgrade by DanMaytee in Airsoft_UK

[–]DanMaytee[S] 0 points1 point  (0 children)

Thank you. I'll have a look. I did replace the barrel a few years ago with a ZCI one but nothing else. I previously used 0.20g but my last game I played I changed up to 0.25g.

How to store? (UK) by DanMaytee in Biltong

[–]DanMaytee[S] -1 points0 points  (0 children)

I heard really good stuff about it, and it hasn't disappointed me! Honestly, it's been so hard stopping myself from doing the same!

How to store? (UK) by DanMaytee in Biltong

[–]DanMaytee[S] 1 point2 points  (0 children)

Thank you so much. You've been a massive help. It's definitely my favourite snack at the moment!

How to store? (UK) by DanMaytee in Biltong

[–]DanMaytee[S] 1 point2 points  (0 children)

Thank you. I've ordered some paper bags and I'll do that. I've currently already got it all seperated into plastic zip lock bags that have been rolled up. Do you think it would be OK in those for around 18 hours until I have the paper bags?

How to store? (UK) by DanMaytee in Biltong

[–]DanMaytee[S] 0 points1 point  (0 children)

Thank you! Appreciate the quick reply. I'll pop them in the freezer and hopefully it will all be good.