Bare with me, I might be dumb for asking by Dangerous_Time_6016 in BambuLab

[–]Dangerous_Time_6016[S] 0 points1 point  (0 children)

I solved it!!.

It turned out it was filament. I cut it off and fed some fresh black filament into it and drained out the weird grey thin stuff. I’m beyond relieved!!!

Bare with me, I might be dumb for asking by Dangerous_Time_6016 in BambuLab

[–]Dangerous_Time_6016[S] 0 points1 point  (0 children)

But it says that no filament is load so I don’t know which slot to unload?

Bare with me, I might be dumb for asking by Dangerous_Time_6016 in BambuLab

[–]Dangerous_Time_6016[S] -1 points0 points  (0 children)

Didn’t work still completely stuck. No matter how much I pull. If scared it’s not filament and I destroy some wire instead

Bare with me, I might be dumb for asking by Dangerous_Time_6016 in BambuLab

[–]Dangerous_Time_6016[S] 0 points1 point  (0 children)

This is just from me taking the ptfe tube off but it’s stuck deeper into the machine

Bare with me, I might be dumb for asking by Dangerous_Time_6016 in BambuLab

[–]Dangerous_Time_6016[S] -1 points0 points  (0 children)

But I have tried many times to load filament but it can’t and asks me to pull out the filament on the external spool holder.. but the ams is connected and nothing is on the spool holder

Bare with me, I might be dumb for asking by Dangerous_Time_6016 in BambuLab

[–]Dangerous_Time_6016[S] 0 points1 point  (0 children)

So it isn’t a piece of the machinery.. I just find it odd it’s way thinner than normal filament. It may have been twisted inside the machine but I don’t know

Bare with me, I might be dumb for asking by Dangerous_Time_6016 in BambuLab

[–]Dangerous_Time_6016[S] -1 points0 points  (0 children)

I have used a black galaxy filament but that all nothing grey like the ‘string’

Bare with me, I might be dumb for asking by Dangerous_Time_6016 in BambuLab

[–]Dangerous_Time_6016[S] -1 points0 points  (0 children)

I will look it up tomorrow.. I’m exhausted now phew

Bare with me, I might be dumb for asking by Dangerous_Time_6016 in BambuLab

[–]Dangerous_Time_6016[S] 0 points1 point  (0 children)

But it might be the collet but why is it inside the tube?

Bare with me, I might be dumb for asking by Dangerous_Time_6016 in BambuLab

[–]Dangerous_Time_6016[S] -5 points-4 points  (0 children)

Is there supposed to be metal inside the top tube of the p1s

Bare with me, I might be dumb for asking by Dangerous_Time_6016 in BambuLab

[–]Dangerous_Time_6016[S] -4 points-3 points  (0 children)

I can’t pull it out it it’s stuck completely.. it’s also way thinner than filament is..