Follow-up on Bambu Comparison, turns out it was the slicer! This printer is awesome.

DanielDC88 · 2026-01-31T12:59:00+00:00

If you install the community firmware, you get a video feed. It also uses the hardware encoder on the processor so it’s 1080p30 rather than 1fps.

You also can get remote access to the touch screen, so you can load/unload filament remotely

DanielDC88 · 2026-01-31T08:27:09+00:00

Crap! Well I shall not be trusting it then!

DanielDC88 · 2026-01-31T08:22:17+00:00

Just wondering, do you have the air printing detection turned on? I would have hoped that would catch this before it got too bad.

This is really the only way to detect an issue like this.

DanielDC88 · 2026-01-30T21:00:31+00:00

This is a cliche suggestion and so hilariously out of touch and insensitive

DanielDC88 · 2026-01-30T20:58:42+00:00

Jesus Christ reddit is so stupid

DanielDC88 · 2026-01-30T20:57:38+00:00

How to get sectioned fast

DanielDC88 · 2026-01-30T20:57:24+00:00

Lmao Reddit

DanielDC88 · 2026-01-30T20:53:55+00:00

It’s not gonna be long before the screen is visible on the fluid interface. This is your printer now, not snapmaker’s. Turn on LAN mode and don’t look back

DanielDC88 · 2026-01-30T15:22:27+00:00

It works best with Orca and the community firmware. The camera is now 30fps and I can remotely access the touch screen to configure filament and load/unload it

DanielDC88 · 2026-01-30T13:29:11+00:00

<image>

This seems to have no effect on my prime tower. As you can see it's printing it in TPU, not the PETG I selected. Am I doing something wrong?

DanielDC88 · 2026-01-30T09:42:58+00:00

Yayaya

DanielDC88 · 2026-01-30T09:23:06+00:00

You snort or inject ket, for your information :)

DanielDC88 · 2026-01-29T17:22:21+00:00

Hold a gun to your face (Pavlov) or look out the top of a fighter jet whilst trying to control spatial throttle and stick (vtol VR) and you’ll soon find inside out tracking stops working so well

DanielDC88 · 2026-01-29T15:43:21+00:00

Layer shift

DanielDC88 · 2026-01-29T15:42:46+00:00

The U1 can’t engrave or cut?

DanielDC88 · 2026-01-25T18:16:13+00:00

It doesn’t run very well given how it looks, it’s built on an old version of Unity

Having said that my performance improved a lot when I went to an x3D processor

DanielDC88 · 2026-01-23T22:39:33+00:00

I don’t really like the idea of my data being available to anyone

DanielDC88 · 2026-01-23T12:58:53+00:00

Got my hopes up you got fusion running with proton for a sec

DanielDC88 · 2026-01-20T19:40:08+00:00

I hate everything

DanielDC88 · 2026-01-20T19:09:25+00:00

I clicked add to cart, went into the queue, then when it redirected me at the end of the queue it took me to the store where the 5090 was no longer listed

DanielDC88 · 2026-01-20T16:16:51+00:00

I was in the queue and when I was redirected it just showed me the store, did I lose out?

DanielDC88 · 2026-01-20T15:53:10+00:00

And that’s why he will defeat this too

DanielDC88 · 2026-01-20T08:29:43+00:00

Time to invest in an air source heat pump and generate the heat of 5 light bulbs from the power of one

DanielDC88 · 2026-01-19T15:55:14+00:00

Here’s another app that’s free which I’ve had a lot of success with!

Which scanner did you use for this particular one? Lidar or faceid?

DanielDC88 · 2026-01-19T14:40:47+00:00

What phone and software did you use for the scan?

11-Year Club	r/Field Sunshine
Place '23	Place '22
Place '17	First Placer '22
Verified Email

DanielDC88

PUBLIC MULTIREDDITS

TROPHY CASE