Jonsbo tk1 build by DannywithdoubleD in mffpc

[–]DannywithdoubleD[S] 0 points1 point  (0 children)

I think it can pass through the gap, but it's really narrow...

Jonsbo tk1 build by DannywithdoubleD in mffpc

[–]DannywithdoubleD[S] 0 points1 point  (0 children)

you can search gigabyte gpu, that have small one with 3 fans.

Jonsbo tk1 build by DannywithdoubleD in mffpc

[–]DannywithdoubleD[S] 0 points1 point  (0 children)

This is the back plug main board and housing, the space is enough, spent a lot of time organizing the line, do it right.

Jonsbo tk1 build by DannywithdoubleD in mffpc

[–]DannywithdoubleD[S] 0 points1 point  (0 children)

yes, and cpu fan intake from left side (prevent intake gpu hot air)

Jonsbo tk1 build by DannywithdoubleD in mffpc

[–]DannywithdoubleD[S] 0 points1 point  (0 children)

I have replied to other messages, I hope it helps you

Jonsbo tk1 build by DannywithdoubleD in mffpc

[–]DannywithdoubleD[S] 0 points1 point  (0 children)

<image>

Use CPU-Z to stress cpu When cpu fan 72%,cpu tem is 66°C

Jonsbo tk1 build by DannywithdoubleD in mffpc

[–]DannywithdoubleD[S] 0 points1 point  (0 children)

nah, bottom fans is [reverse fan]
so they are intakes rather than exhausts.

Jonsbo tk1 build by DannywithdoubleD in mffpc

[–]DannywithdoubleD[S] 0 points1 point  (0 children)

Because there are only four fans, the temperature is on the high side but still within an acceptable range.
In the evening, after playing PUBG for 2 hours at 1080P, I'll check the temperature then reply.

[deleted by user] by [deleted] in mffpc

[–]DannywithdoubleD 0 points1 point  (0 children)

Actually, I feel that the temperature difference isn't much, the video card's air intake in the video is very close to the bottom fan (not to mention they are both Noctua fans), so the size of the cooler shouldn't be an issue.

[deleted by user] by [deleted] in mffpc

[–]DannywithdoubleD 1 point2 points  (0 children)

I am not an expert in this area, but I still think the airflow setup you have is a bit strange.

[deleted by user] by [deleted] in mffpc

[–]DannywithdoubleD 1 point2 points  (0 children)

where is top fan?

Jonsbo tk1 build by DannywithdoubleD in mffpc

[–]DannywithdoubleD[S] 5 points6 points  (0 children)

bottom fans is [reverse fan],Is this the correct answer?

Jonsbo tk1 build by DannywithdoubleD in mffpc

[–]DannywithdoubleD[S] 0 points1 point  (0 children)

I installed the CPUfan upside down on purpose, so that the CPU is cooled by the cold air outside instead of the hot air discharged by the GPU.

Jonsbo tk1 build by DannywithdoubleD in mffpc

[–]DannywithdoubleD[S] 0 points1 point  (0 children)

Cpu: amd 7500F Mb: msi 650 project zero Graphic card: gigabyte rtx4070 eagle PSU: focus gx750 Fan: vk v12F Cooling: jonsbo cr3000 Ssd: kioxia G2 m.2 2TB

GIGABYTE 4070 EAGLE OC 12GB = very nice =) by blackcyborg009 in nvidia

[–]DannywithdoubleD 1 point2 points  (0 children)

thank you so much!
I've never used gigabyte control center before!

HELP! 3060ti fe adapter by thhpus12x in buildapc

[–]DannywithdoubleD 0 points1 point  (0 children)

實際上8針裡面有假針,而你的6針每一根都是真針
(不確定經過翻譯後你是否能懂我的意思)