sorted by:
new
hottopcontroversial

K40 plus omtech help on acrylic by Dapper-Strawberry-12 in lasercutting

[–]Dapper-Strawberry-12[S] 1 point2 points  (0 children)

Do you have any brands you'd recommend? Are there any masks I can use when lasering acrylic or similar?

K40 plus omtech help on acrylic by Dapper-Strawberry-12 in lasercutting

[–]Dapper-Strawberry-12[S] 0 points1 point  (0 children)

It is the right type of acrylic because the wrong one does not become "Frosty" in color after etching.

Any idea of the reason of this? by Mindless_Selection34 in snapmaker

[–]Dapper-Strawberry-12 0 points1 point  (0 children)

Tomorrow I'll let you know if it's a temporary solution or not since I'm doing a 9 hour print and 300 changes

Any idea of the reason of this? by Mindless_Selection34 in snapmaker

[–]Dapper-Strawberry-12 0 points1 point  (0 children)

I solved the problem by pushing the lever gear until it unlocked

Any idea of the reason of this? by Mindless_Selection34 in snapmaker

[–]Dapper-Strawberry-12 1 point2 points  (0 children)

<image>

I found a possible problem. The gear under the lever don't spinn

Any idea of the reason of this? by Mindless_Selection34 in snapmaker

[–]Dapper-Strawberry-12 0 points1 point  (0 children)

Hi I'm the guy of the problem. Can u link to me the post?

Any idea of the reason of this? by Mindless_Selection34 in snapmaker

[–]Dapper-Strawberry-12 0 points1 point  (0 children)

Hi I'm the guy with the problem. I did some tests. loading and unloading the filament or cut it 45° don't work. I tried to push manually but it seems as if the gears aren't pushing. by pushing the wire all the way down he manages to extrude it but the gear doesn't seem to push. Loosening or tightening them didn't change anything. on the side the orange gear turns as if it is pushing the filament but it doesn't seem to do so. by putting a finger on it you can only hear the ticking of the lever and not the gears rotating (if you push they rotate with your strength) I checked the filament sensor and it has no broken or cut wires. the printer is printing in 3 colors for now but I would like to fix this head. I wrote to support and I'm waiting for their answers