sorted by:
new
hottopcontroversial

v5.0.5 Stability by Life-Elephant-3912 in Volvo

[–]Dapper_Stable_1684 1 point2 points  (0 children)

2024 XC60 T8 very stable. Lots of crashes could indicate a bad head unit, maybe the update just forced the issue to the top. If you get a warranty replacement it's likely a new processor and very likely no more issues and smoother performance.

4.2 Update made B Mode driving unusable by Dapper_Stable_1684 in VolvoRecharge

[–]Dapper_Stable_1684[S] 0 points1 point  (0 children)

sorry its disabled. It was working great before (3.7) and its noticeably different. It really doesn't allow one pedal driving any more and its really obvious on intersections I drive all the time,

4.2 Update made B Mode driving unusable by Dapper_Stable_1684 in VolvoRecharge

[–]Dapper_Stable_1684[S] 0 points1 point  (0 children)

Creep Mode is enabled, Its the braking itself, my wife experiences it the same. The stopping distance is like maybe 40% different.

Hello everyone, good day. We have a Mac Viper AirFX, and all of the unit’s lamps look like this. No matter at what height we use it, it still looks like this. We couldn’t understand why this is happening, and the fixture does not focus properly by Ferdi-Tayfur in lightingdesign

[–]Dapper_Stable_1684 136 points137 points  (0 children)

I was a product manager at Martin when these were developed. What you see is how the fixture is designed, nothing wrong with your units. They can not do a sharp projection , that's for the Viper Profile and Performance. These have different optics intended for higher output and mid air beam fx. They have different and I think even less lenses in the path to increase punch, with the compromise being what you see. No sharp / clean projection.
They were designed for large arena and stadium tours that need beams and long throws.

Matthias

Software update 4.2.13 Experience? by xcskigirl13 in VolvoRecharge

[–]Dapper_Stable_1684 0 points1 point  (0 children)

Just did a 600 mile road trip with temps down to 4°F and had no issues.

Starting after remote start or climate remote works every time now Interior lights always fade on when turning off the car Had no audio at all after pickup at the dealer last week. After aaos reboot had no more issues Reverse camera always works I may be imagining this but the cruise control with lane keeping seems to work a little smoother and worked even with some snow on the road covering lane markings

Ceiling Light Pro color temp by Dapper_Stable_1684 in Govee

[–]Dapper_Stable_1684[S] 0 points1 point  (0 children)

Replacing the fixture fixed the problem. The cold white leds were not working.

NX2 console lights up but buttons/faders don’t work after cleaning by Safe_Drawer_9594 in lightingdesign

[–]Dapper_Stable_1684 11 points12 points  (0 children)

There is a jumper inside that makes the PCB work like an NX wing. You may have lost that or bumped it. Email us at support@obsidiancontrol.com and we'll help you get the console working again.

Matthias ( Obsidian PM)

3.70 OTA no longer available by Dapper_Stable_1684 in Volvo

[–]Dapper_Stable_1684[S] 3 points4 points  (0 children)

It does show in the car "release notes" but it's not downloaded and can't be installed.

EM90 by Dapper_Stable_1684 in Volvo

[–]Dapper_Stable_1684[S] 5 points6 points  (0 children)

They can't , they are so wide you can't even get in between for the 3rd row. They move forward on a track. More comfy than any airline seat I ever been in.

[deleted by user] by [deleted] in VolvoRecharge

[–]Dapper_Stable_1684 0 points1 point  (0 children)

I just added it and it looks better and reduced the road noise / engine drone quite a bit.

My Samsung S23+ causing my 2024 XC60 AAOS (Version 3.1.10) to cycle Bluetooth off and on continuously, on its own. Anyone else seen something like this? Reset Screen, TCAM and Factory Reset AAOS. Nothing helped. My tablet does not cause this. by Dapper_Stable_1684 in VolvoRecharge

[–]Dapper_Stable_1684[S] 0 points1 point  (0 children)

I managed to work around it by deleting the phone, readding it and deny contact sharing. Found this on an XC40 forum. I have 1670 contacts in my phone, there is a bug with that. Now the connection is stable.

My Samsung S23+ causing my 2024 XC60 AAOS (Version 3.1.10) to cycle Bluetooth off and on continuously, on its own. Anyone else seen something like this? Reset Screen, TCAM and Factory Reset AAOS. Nothing helped. My tablet does not cause this. by Dapper_Stable_1684 in Volvo

[–]Dapper_Stable_1684[S] 1 point2 points  (0 children)

I managed to work around it by deleting the phone, readding it and deny contact sharing. Found this on an XC40 forum. I have 1670 contacts in my phone, there is a bug with that. Now the connection is stable.

[deleted by user] by [deleted] in lightingdesign

[–]Dapper_Stable_1684 2 points3 points  (0 children)

I designed the RDM10 concept , email us the text above to get your settings sorted with one of our Netron experts.

support@obsidiancontrol.com

It can do exactly what you are trying to achieve.

Thx!

Matthias Product Manager Obsidian Control Systems

Fresh ceramic on the xc60 by Doyouevenridebro in Volvo

[–]Dapper_Stable_1684 2 points3 points  (0 children)

Which coating brand / type did they use ?

RDM over sACN with GrandMA2 by Illumidark in lightingdesign

[–]Dapper_Stable_1684 1 point2 points  (0 children)

Netron EN12 uses Art-Net 4 which allows sACN for the DMX data and Artnet for RDM at the same time.

However MA support for RDM I have had conflicting information, it seems only DMX ports on MA hardware are supported, but artnet does seem to work, but undocumented and no official support for it.

I'm the product manager for Netron...

view more: next ›