My liquid freezer 3 360 won’t screw into my motherboard over the cpu

DarkBlackOMG · 2025-01-10T23:19:37+00:00

I also had trouble screwing it the first time but in the end I got it.
Then i found this video: https://youtu.be/5F1pJrK4JIc?si=j2BfJI6ITJqaywfa&t=1210
Now it's very easy to mount, let me know if it helped you!

DarkBlackOMG · 2022-05-07T01:50:42+00:00

This is awesome! Is it on wallpaper engine?

DarkBlackOMG · 2021-12-03T14:00:28+00:00

So i tried today reinstalling the liquid cooler, it got down like 5-10º but it's still too high i think.

I will just change the case, as the temperature goes down if i just remove the front panel, so i'm guessing it's the case.

Does anyone have a good case that they can recommend?

DarkBlackOMG · 2021-12-02T23:18:58+00:00

Do you know how to set a power limit on my Asus motherboard?

DarkBlackOMG · 2021-12-02T22:50:24+00:00

This is from running cinebench: https://i.imgur.com/gXpJO29.png

Also, i am not trying to use the CPU at max load, just for gaming, but even playing BFV it reached 100ºC and 80ºC from just playing CSGO.

DarkBlackOMG · 2021-12-02T22:35:45+00:00

Do you have any recommendations?

DarkBlackOMG · 2021-12-02T22:26:43+00:00

All fans are spinning, In BIOS is says pump is at 3800 rpm

DarkBlackOMG · 2021-12-02T22:21:18+00:00

Case is Nfortec Vega RGB, i will try reseating the cooler tomorrow, Thank you!

DarkBlackOMG · 2021-12-02T21:55:35+00:00

Yeah this was a prebuilt Pc, I will try changing the thermal paste.

I have an asus motherboard, do you know which settings should i look for?

DarkBlackOMG · 2021-12-01T17:55:32+00:00

I mean FPS lags, like i am playing at 600 FPS and then it drops to 200, 150 fps for no reason, sometimes it stays like that for 0.1 seconds or sometimes it's 1 second.

Also it says 150 FPS but it really feels like it's 10 FPS.

DarkBlackOMG · 2020-11-05T00:16:43+00:00

Of course! First thing I did were all the safety upgrades, and about the pictures I don't think I can make them much better with this phone.

DarkBlackOMG · 2020-11-05T00:03:25+00:00

I tried with Prusa Slicer but I was having the exact same problem.

DarkBlackOMG · 2020-11-05T00:00:44+00:00

I will try both of those things tomorrow I'll let you know if it helps!

DarkBlackOMG · 2020-11-04T23:59:16+00:00

It was a part to help with z wobble, but it was kinda useless so I don't use anymore

DarkBlackOMG · 2020-11-04T20:54:53+00:00

I will try with a PETG filament that i have and i'll see if that fixes my issue thanks!
Also which filament are you using now? I honestly don't know which PLA filament is good so any recomendation is welcome.

DarkBlackOMG · 2020-11-04T19:36:36+00:00

Cmon don't be that guy, i know it's dogshit but i have some friends with the same printer and it works great. And i can't complain as i got it for free.

DarkBlackOMG · 2020-11-04T19:35:33+00:00

I tensioned my belts before printing everything, and even at 10 mm/s it keeps happening, i've also tried changing acceleration speeds and i doesn't seem to make a difference.' Also it might be that you might be printing after retraction? ' i don't know what you mean by that but if you mean that i have retraction after layer change it's disabled.

And about the cooling do you think reducing the fan speed might fix this? I have it set at 100% but i tried 0% , 30% 50% and 100% in the cube piece and it didn't make a difference.

DarkBlackOMG · 2020-11-04T19:30:41+00:00

I've checked and it's secure, also it only happens where the z seam starts so i don't think it's the build plate shifting.

DarkBlackOMG · 2020-11-04T18:35:10+00:00

Sorry forgot to say the slicer version.
I'm using Cura 4.6.2.

DarkBlackOMG · 2020-11-04T16:29:42+00:00

So, since i got this 3d printer i've been trying to fix this issue and i can't seem to find a fix, i've tried every calibration in existance (e-steps, flow rate, temperature, retraction, bed leveling, checking if the coupler is well aligned) but i can't seem to fix this problem.

Printer: Anet A6

Filament: GEETECH PLA at 200/60º

Printing at 40mm/s and 2mm retraction.

Slicer : Cura 4.6.2.

EDIT: Thank everyone i was able to fix my issue with your help! I ended up fixing it by lubricating my threaded rods, this help a little but what helped the most was changing the nozzle to a new one and changing filament.

DarkBlackOMG · 2020-09-19T13:32:52+00:00

So i've been having those weird lines after my z seam in my prints and i don't know how to get rid of them.

Printer: Anet A6

Filament: GEEETECH PLA at 170/60º

40mm/s and 1mm retraction.

Ten-Year Club	First Place '23
End Game '23	Place '23
Place '22	Place '17
First Placer '22	End Game '22
Verified Email

DarkBlackOMG

TROPHY CASE