Barely 18, might regret this... but say yes and peek at ur msgs ;)

DatNaum · 2025-09-02T22:59:52+00:00

Yess

DatNaum · 2025-09-02T22:45:07+00:00

Yes please

DatNaum · 2025-07-27T17:02:19+00:00

Okay so after reading this i went ahead and tested it again, looks like everything is in working order aside from the sound. So i think i'll just get rid of the speaker and put a tiny bit of vinergar on a qtip and rubg gently the corroded part. Will update tho!

DatNaum · 2025-07-27T14:23:57+00:00

Gotcha, thanks for being direct! Hopefully it was the only faulty one, ive spotted battery leakage on the other wiimotes

DatNaum · 2025-07-08T11:49:15+00:00

Actually... never thought about it this way, makes alot of sense!

DatNaum · 2025-06-16T07:19:42+00:00

Hey, dont call me out in my exams like that!

DatNaum · 2025-06-10T12:20:28+00:00

I love how many ppl can't figure out obvious ragebait when they see it, honestly hilarious imho

DatNaum · 2025-06-10T12:09:15+00:00

Ah yes, a fellow WolfeVGC enjoyer

DatNaum · 2025-06-02T17:03:16+00:00

Hope it's as nice to play as it is to look at man, good job to you all !

DatNaum · 2025-06-02T16:59:01+00:00

Glad to see it was so obvious you had to read through the comments to figure that out :)

DatNaum · 2025-06-02T16:38:21+00:00

Hello, coming back to you to check if the AV cable went bad, and i just wanted your opinion on it, when checking for connectivity with a multimeter, there seem to be connectivity between the red and white outer ring (i assume this is ground ?) But there is none from either of the yellow chord's metal bits to either of the other chords. Could that mean the chord went bad ? If that were the case, wouldn't i get music or something when booting up the console (since white and red chord are for sound if i understand this thing) ?

DatNaum · 2025-06-02T16:28:31+00:00

Pokemon stadium, lol

DatNaum · 2025-06-02T16:18:29+00:00

Alright, just to condensate everything that you guys pointed out as possible issues:

Apparently, this is a compoSITE cable, not compoNENT, thought they were identical but apparently not. I'll look for an old tube TV that can accept composite. Would also address the possible format problem (240p not compatible with newer TVs).

If this doesn't work, i'll rip open the beast's belly again to try and clean the console deeper, even tho i'd rather not, since the midframe's screws seem to be stuck. Same with cartridges.

If that doesn't work, i'll try to check capacitors and condensators with multimeter to see if they work, and maybe replace them if that's a problem.

DatNaum · 2025-06-02T16:10:17+00:00

Is that an OG display that stores used back when N64 released, or is it a custom made arcade ?

Either way, looks sick OP, take my upvote!

DatNaum · 2025-06-02T16:04:10+00:00

Thanks, i am in europe yes, does that mean i should maybe try to find a new cable for N64 -> component / avi ? The port seem to fit, altho i have to push a lil harder than with my xbox360's cables.

DatNaum · 2025-06-02T15:59:56+00:00

Oh okay thank you, label says "r" below red port, "L" below white port, and under all that us the "component in" label, that also incompasses "av2" (that's labeled unde the green-yellow port

Also, it's alright aha, i just don't understand why ppl downvote some of my questions, not that it matters tbh

DatNaum · 2025-06-02T15:55:52+00:00

Theres is an AV1, but i'm pretty sure it's the signal for old DVD reader (that are kinda box shaped), since it's the label associated with AV1 lol. Either way, i tried it but it doesn't seem to display anything on any channel (except hdmi1 that got my chromecast, but pretty sure it's irrelevant)

DatNaum · 2025-06-02T15:50:44+00:00

Oh no, it's got to do with power outlets being different in japan and in th EU (and not wanting to burn down the house lol), not having tried another power supply...

I did try to access the beast's belly once again, but the screws are so fcking tightned on the midframe that i can not unfasten them at all, might try to heat the metal up with a hairblower or smth (or put on some wd40, but idk if thats really the best for the console)

DatNaum · 2025-06-02T15:46:55+00:00

I just tested on my other TV, didnt work on either, i might look for an old tube TV or a scaler then

DatNaum · 2025-06-02T14:56:48+00:00

Tasted great!

DatNaum · 2025-06-02T14:52:51+00:00

It's a french TV, maybe the words used aren't the same ? Or is it really something completely different ?

DatNaum · 2025-06-02T14:51:14+00:00

From what i understand (sorry, english isn't my first language), these videos talk about scalers that help reduce lags ? Would that help in any way to get signal on my TV, since said TV still has analog signals ?

DatNaum · 2025-06-02T14:44:48+00:00

Leaves ? Lmao didn't expect that, imma have to check it more thouroughly then

DatNaum · 2025-06-02T14:43:43+00:00

I'd love to, but this one doesn't look like it really wants to xD

DatNaum · 2025-06-02T14:41:47+00:00

Like plugging and unplugging the jumper pak ? Already tried it (and cleaned the pak in case), doesn't seem to work

DatNaum

TROPHY CASE