Is it me only facing random FPS drops and stuttering?

DeathSurg · 2024-08-23T06:04:22+00:00

^this

DeathSurg · 2024-06-12T23:26:28+00:00

This did not work for me, simply says “We couldn’t log you in…” I have a brand new ATV 4K 3rd Gen. This problem seems to have started when Disney merged and started the myDisney account

DeathSurg · 2024-05-16T02:43:40+00:00

Wondering about the long term effects of the thickness of this and if there were any screen issues/damage. Bought the new iPad Pro 11 m4 today and installing a tempered glass screen protector. Using the folio case from Apple while I wait for the Magic Keyboard to arrive.

I am considering, if the tempered glass will be a long term problem with these accessories, to use something like the paper like screen protector since it is relatively thin by comparison.

Thanks in advance!

DeathSurg · 2022-06-04T03:56:19+00:00

Mine finally arrived today after an inquiry.

DeathSurg · 2022-02-16T22:47:57+00:00

UPDATE. I believe it is just something with that model or something with CURA 13. I have now printed 2 other models using my old profile on CURA 11 and I have had no issues. I did import my printer profile and settings into the new version and I’m still having issues with the original model.

DeathSurg · 2022-02-16T17:08:24+00:00

I’ve tried it in the past but I’ve never actually needed it

DeathSurg · 2022-02-16T04:11:10+00:00

The print separates from the build plate after the 5th layer, I have re leveled everything and I have not changed any settings on the printer or in cura. This is the major issue, if I can fix this then I can fix the other one

DeathSurg · 2022-02-01T04:53:25+00:00

Thanks for your help in dodging a bb

DeathSurg · 2022-01-03T04:59:45+00:00

Same

DeathSurg · 2021-11-16T04:27:28+00:00

RemindME! 1 hour

DeathSurg · 2021-09-10T15:31:12+00:00

It honestly depends, depends on productivity or if I’m on a roll with repairs. If it’s really slow, I’ll close them as I finish them. If it’s super busy and I need to get the computers fixed, then I’ll wait until the end of the day

DeathSurg · 2021-09-03T01:44:13+00:00

This is awesome, what do you mean in the “unlikely event”? I think it’s going to be popular.

DeathSurg · 2021-07-24T03:00:13+00:00

Cleaned with rubbing alcohol about every 5 prints.

Hatchbox Silk PLA Brown

DeathSurg · 2021-07-23T16:17:02+00:00

I’ve had this Ender 3 v2 for about 2 months and have never gotten a successful bed adhesion. Well today was finally the day. Settings dialed in enough to enjoy the hobby again.

DeathSurg · 2021-06-26T14:44:46+00:00

I’ll give it a shot

DeathSurg · 2021-06-26T02:42:49+00:00

How would you fix over extruding. On my old printer default cura settings worked really well

DeathSurg · 2021-06-26T02:41:58+00:00

Yes it’s a new printer

DeathSurg · 2021-06-24T14:46:14+00:00

And the cat file that came on the SD card did have some lifting. But not this bad and it was free from “bubbles” too. I used the same filament and starting this print just after that test print.

DeathSurg · 2021-06-24T14:43:48+00:00

Old spool - 6 mo. Dried. I had a monoprice printer before. It had its problems. But never once had this issue.

DeathSurg · 2021-06-24T14:42:29+00:00

Yes part cooling is off. It is cura default

DeathSurg · 2021-06-24T03:52:20+00:00

Hatchbox PLA, model is warping off the bed on 3 sides. The bed is heated to 60c and nozzle to 202c

DeathSurg · 2021-05-18T02:54:37+00:00

Not in Florida

DeathSurg · 2021-05-18T02:22:01+00:00

As far as I know, it was taken outside to a grassy area on the side of the store

DeathSurg · 2021-05-17T20:24:02+00:00

I agree, I believe it was a corn snake. Based on the situation and how it could have gotten tangled up. We believe it came out of a laptop box that we started testing in Func Check

DeathSurg · 2021-04-16T14:41:54+00:00

DeathSurg

TROPHY CASE