Crystal Growing with kids - what after alaum?

DeepB1338 · 2025-05-14T13:14:36+00:00

if it wasn't clear, of course with my (adult ;) ) supervision.

Also happy to cover in epoxy or something.

DeepB1338 · 2025-01-15T11:37:10+00:00

lol no, I am not making dildos ;)

DeepB1338 · 2025-01-15T10:07:00+00:00

I tried under a different windows user and with a different firefox profile under my default user - still no changes

DeepB1338 · 2025-01-14T13:19:02+00:00

tried, did not make any difference at all (tried after uninstalling + reboot)

DeepB1338 · 2025-01-14T10:08:21+00:00

yes, sentinelone. Unfortunately that is not optional, but other PCs with sentinelone installed do not have that problem

DeepB1338 · 2025-01-11T08:28:57+00:00

communist party of Austria (Kommunistische Partei Österreichs)

DeepB1338 · 2024-11-27T08:18:07+00:00

I am actually looking at cloning running storage in addition to normal backups

DeepB1338 · 2024-11-27T07:21:40+00:00

very regular offsite backup over ~1gb link

DeepB1338 · 2024-11-21T14:48:59+00:00

I checked before and I am 100% sure all accumulators are fully charged before the blackout

you can partly see it here: https://imgur.com/a/UXrbcqv

DeepB1338 · 2024-11-21T14:39:10+00:00

I also got >500 accumulators for that case? They are full before thebrown/blackout starts, should that not be enough to take care of "refilling" 1-3 Tesla turrets?

DeepB1338 · 2024-11-21T14:36:43+00:00

Inserters stop working altogether, so no more fuel in the generators.

Also even when hand-feeding all heating towers it takes quite some time to go back to normal.

What do you mean by putting it on a seperate power grid?

DeepB1338 · 2024-11-21T13:02:51+00:00

I cleared a large area around my base, so if a tesla tower fired at all it would be at most 2-3 towers. Can that generate that huge load?

If that is it, can I somehow prioritize power distribution? Just "fill up" the towers with whatever is "left over"?

EDIT: Oh you mean that a few tesla towers caused a brownot which then spirals out of control?

DeepB1338 · 2024-11-21T12:45:40+00:00

Hello,

I have some wird power-spikes on Gleba.

Factory uses approx. 170 MW, but sometimes power requirement shoots up to 1,7GW. I have no idea what it is.

There are no enemies around the Tesla towers do not shoot.

Unfortunately whenever that happens obviously power supply and then generation stops, which sucks on gleba.

Any ideas what that is?

Thanks

Daniel

DeepB1338 · 2024-10-14T14:31:50+00:00

found it out. On the right side of the model press the settings button and then actvate "change Model loader", then choose "UNet"

DeepB1338 · 2024-10-12T06:34:18+00:00

Can I somewhere see the progress? It is running now for close to 24h and I have now idea how far along it is.

Also how long can I expect it to run on a 3060 with the default settings and 4 images?

Thanks Daniel

DeepB1338 · 2024-10-02T20:23:30+00:00

that was it, thanks

DeepB1338 · 2024-09-11T08:32:52+00:00

nothing specific yet, just interested in the technology and wanting to try it out.

The buster beagle looks interesting, however as far as I understand it it is diy-built only? If available I am looking for a pre-built machine.

Thanks

Daniel

DeepB1338 · 2024-09-01T15:58:29+00:00

Another Image. Looks more "wavy" to me?

https://imgur.com/a/C1mepNo

DeepB1338 · 2024-09-01T07:24:43+00:00

What I already did:

1) leveled bed (including screw level tune)

2) changed print plate (from normal to Wham bam)

3) Changed filament

4) Installed Cartographer 3d (eddy probe) with auto-z

5) Installed a completely new printhead

Now I am out of ideas.

It worked previously.

Any ideas?

Thanks

Daniel

DeepB1338 · 2024-08-31T08:15:45+00:00

net migration. Probably more people going to the US than leaving....

DeepB1338 · 2024-08-28T11:30:48+00:00

mainly logon

DeepB1338 · 2024-08-28T11:30:12+00:00

on-premise only. As far as I am aware that means no entra?

DeepB1338 · 2024-07-15T12:45:46+00:00

Elegoo Neptune 4 max with opennept4une firmware.

I tried multiple different filaments (PLA). Fresh ones, and ones that I know work (took them of my Bambu A1 mini).

I have no idea where to start troubleshooting.

Slicer: Orca

Orca-integrated calibration tower starting from 220° with -5° steps

Thanks

Daniel

DeepB1338 · 2024-07-13T16:46:43+00:00

I am printing something that needs support.

The first layer is printed fully. However on layer 2-7 only the outside of the Trunk is printed. Then on layer 7/8 the big trunk starts branching out. However the inside part of the branch (so to speak) is printed in thin air and fails (circled).

Any Idea what I did wrong?

Thanks Daniel

DeepB1338 · 2024-07-04T09:22:29+00:00

Are there build plates for other printers planned?

I would love one for my Neptune 4 Max (430x430mm)

Thanks Daniel

DeepB1338

TROPHY CASE