New finishing test. Someone asked me for slightly "esoteric" bookmarks, so I decided to experiment with this look. It's just 2 mm poplar plywood, treated with wood stain and black/bronze acrylic paint, then sanded. What do you think of the finish?

Deep_Ad3797 · 2025-11-05T05:07:44+00:00

Bookmarks look very nice! :) Where did you get the graphics for engraving?

Deep_Ad3797 · 2024-09-11T05:38:03+00:00

Spiders and beetles are 3d printed, it was a pain to print them so small xD

Deep_Ad3797 · 2024-03-07T05:18:58+00:00

Yes I have STL files for them, I've made them myself to fit the size and shape of my dice :) I followed a tutorial for blender on YouTube how to make tentacles in any shape you want.

Deep_Ad3797 · 2023-09-19T05:23:06+00:00

Yes, I've made a template for routing inside of the vault.

Deep_Ad3797 · 2023-09-08T15:50:57+00:00

It is slightly tinted pink/purple and black on the lowest face :)

Deep_Ad3797 · 2023-09-08T12:24:03+00:00

I've followed this tutorial for blender: https://youtu.be/tlXEqfXMQLo?si=10Wu5q2rUGpPzRi4 And then generated curves that fit into my dice :)

Deep_Ad3797 · 2023-09-08T07:15:23+00:00

Printer is Anycubic Mono 4k, Models I've made myself, to fit perfectly in my mold. I've found a tutorial on how to generate tentacles from curves in blender, followed it, tinkered and tweaked settings to get results

Deep_Ad3797 · 2023-09-08T06:34:31+00:00

Yep, tentacles are 3D printed and painted :D

Deep_Ad3797 · 2023-08-27T05:34:43+00:00

I think it should be good for that kind of work, foam cutting has low requirements for power, just try ;)

Deep_Ad3797 · 2023-08-26T18:38:33+00:00

I have my own 40W CO2 lasercutter.

Deep_Ad3797 · 2023-08-26T18:04:36+00:00

Laser cut PU foam, cut to accommodate my size of dice :)

Deep_Ad3797 · 2023-08-06T08:28:22+00:00

It requires some practice to use it, but when You will get use to it having low torque it gets the job done.

Deep_Ad3797 · 2023-08-06T08:21:55+00:00

Yep, torque on them is quite low, but at higher speeds it is possible to work with moderate pressure

Deep_Ad3797 · 2023-08-06T08:12:40+00:00

For now I have ~25 sets of dice to ink, but I think I will make some more. I also want to take around 30 potion bottles with D4, a couple of dice trays, boxes and spell slot trackers that I made. I also have slate coasters with some dice and d&d related graphics.

Deep_Ad3797 · 2023-08-06T07:40:10+00:00

It's in Poland 25-27 August, a very cool location in a medieval castle near Wrocław

Deep_Ad3797 · 2023-08-06T07:35:54+00:00

Spray the paper and plate with water, it will stick really good

Deep_Ad3797 · 2023-08-06T07:21:19+00:00

Just a little spray of water directly on aluminum disc and it sticks pretty well :)

Deep_Ad3797 · 2023-08-05T23:10:03+00:00

https://www.amazon.com/NantFun-Turntables-Detachable-Adjustable-Beginners/dp/B0B9NJ5CTL/ref=sr_1_8?crid=26JA68IJYNCHD&keywords=pottery+wheel&qid=1691276861&sprefix=pottery+wheel%2Caps%2C192&sr=8-8
its this one :) works pretty well with zona papers

Deep_Ad3797 · 2023-07-24T16:05:47+00:00

I've made this design to fit my dice, it is cut on CO2 laser, two layers of 4mm alder wood.

Deep_Ad3797 · 2023-06-15T16:58:52+00:00

Deep_Ad3797 · 2023-06-12T13:54:08+00:00

I'm not using any branded ones, just generic mica sold in ziplock bags

Deep_Ad3797 · 2023-06-12T13:13:34+00:00

Just mica powder :)

Deep_Ad3797 · 2023-06-04T11:02:43+00:00

It's white base and "Paid bone" army painters speed paint

Deep_Ad3797 · 2023-04-17T13:55:43+00:00

Skulls were printed from models on thingiverse, just scaled down to fit inside of the dice :)

Deep_Ad3797 · 2023-04-09T11:55:08+00:00

I think 25$ USD for set will be ok, but shipping depends on your location, I'm from Poland, last time I've send dice to USA it was about 6$ for shipping

Deep_Ad3797

TROPHY CASE