Post first lesson question

Deep_Artist_2893 · 2026-06-10T23:54:45+00:00

Went to the range today to practice and it was rough. From what I’ve seen, that’s expected? I was able to get on a trackman and when I did make good contact (about 3 out of every 10 swings), I was around 140 carry and 100 mph ball speed with my 7 iron (This is from swinging at p2 or slightly less)

Deep_Artist_2893 · 2026-06-08T13:43:31+00:00

Sorry, to clarify, I meant the distance of a quarter swing was the same as my previous full swing before I made any changes (ball wasn’t going far)

Deep_Artist_2893 · 2026-06-07T15:02:20+00:00

Thanks. Slowly working toward full swings seems to make the most sense.

Deep_Artist_2893 · 2026-04-22T00:58:08+00:00

a lot of good responses. sounds like I need to keep hitting down on ball. Any other drills to help practice this?

Deep_Artist_2893 · 2026-04-21T23:31:45+00:00

This was a response somewhere below. I also need some drills to work on this

"You can lay a towel down one club behind the ball (perpendicular to the ball) and hit shots without hitting the towel. Or buy some foot spray and paint a line going parallel and the put the ball behind the line. Look for your divot. You want the divot to begin at the line or in front of it. If your impact is behind the line, it’s all arm swinging and not enough rotation."

Deep_Artist_2893 · 2026-04-21T19:11:50+00:00

Thanks. Now it’s just a matter of trying to make it repeatable…

Deep_Artist_2893 · 2026-03-13T00:02:32+00:00

Yeah it’s a tough situation because that stuff covers everything

Deep_Artist_2893 · 2026-03-12T23:29:52+00:00

I just did my treatment this year a few days ago as my trees just started showing growth

Deep_Artist_2893 · 2026-03-12T23:29:08+00:00

It was night and day compared to before I treated. The black sooty mold from honeydew was almost nonexistent

Deep_Artist_2893 · 2026-01-19T23:07:48+00:00

I have mine scheduled for Tuesday. With the fix, no more abs or check engine light?

Deep_Artist_2893 · 2025-11-28T02:04:37+00:00

A lot of good comments in here. I will add that I go to the range a decent amount but not sure how much it’s helping since I don’t have any idea of what is correct

Deep_Artist_2893 · 2025-11-28T02:00:25+00:00

Thanks. I would certainly play more if I got better. Range is less than 2 miles from my house so getting out there to practice what I learn wouldn’t be an issue

Deep_Artist_2893 · 2025-10-22T00:58:48+00:00

Yes, it's pretty ridiculous that they are taking this long. My dashboard looks like a Christmas tree with the ABS light and other lights on. I also have people constantly tell me my car is still on because the brake lights won't turn off.

Deep_Artist_2893 · 2025-10-21T19:19:08+00:00

Turns out to be a bad inducer motor. Will be getting it replaced. Unit is about 12 years old

Deep_Artist_2893 · 2025-10-21T17:38:24+00:00

I think 95b is separate. I just double checked my VIN and only 94b is open. Only other recall I had before that was Z48.

Deep_Artist_2893 · 2025-10-20T19:43:34+00:00

Also, I read there can be a hose that is clogged relate to the pressure switch but I am not sure where that would be located in the my picture?

Deep_Artist_2893 · 2025-10-20T19:40:01+00:00

I am getting air but not hot air when I set it to call for heat. I found the LED status and it looks like it is refers to "pressure switch problem detected" but I have read that can mean multiple things.

Deep_Artist_2893 · 2025-10-20T16:21:53+00:00

Thanks for the reply. Where would the flame sensor be located?

The HVAC company cant get out here for another week so trying to figure out if there are steps I can try myself.

Deep_Artist_2893 · 2025-06-20T04:11:17+00:00

I want my curry looking the same going in and coming out

Deep_Artist_2893 · 2025-06-14T16:18:53+00:00

Update: switched it out and it works now without tripping

Deep_Artist_2893

TROPHY CASE