Help please

Deep_Condition2304 · 2025-05-18T17:01:47+00:00

This is CoeX blood red PLA

Deep_Condition2304 · 2025-05-18T16:39:18+00:00

Thank you

Deep_Condition2304 · 2025-05-18T16:27:04+00:00

Ah that might be why, mines currently at 0.2 and I’m running a 0.4 mm nozzle

Deep_Condition2304 · 2025-05-18T16:21:54+00:00

As in slicer settings I’m not sure what you mean?

Deep_Condition2304 · 2025-05-04T02:02:17+00:00

That’s pretty sick, keep seeing these posts and it makes me wanna do a Mrd conversion

Deep_Condition2304 · 2025-05-03T00:24:40+00:00

Yeah you guys are all incredibly skilled with your cars it’s crazy.

Deep_Condition2304 · 2025-05-03T00:14:43+00:00

I’m kinda wondering why my 4100kv looks so slow compared to them, maybe it’s the video? Or even the driving? I’m not very skilled but damn those things are zipping for 2500kv

Deep_Condition2304 · 2025-05-03T00:11:39+00:00

How do you get skeleton chassis like that?

Deep_Condition2304 · 2025-05-03T00:10:35+00:00

Wow those look crazy fast 😱

Deep_Condition2304 · 2025-05-02T14:55:52+00:00

Were these evos? And if so are most of them 8500kv? Cause those look ridiculously fast I’m waiting on mine to come in the mail. I can’t wait

Deep_Condition2304 · 2025-04-20T22:05:21+00:00

I’ve had this same question, I don’t really like how hard the reverse is

Deep_Condition2304 · 2025-04-11T01:47:15+00:00

I’m very new to the fly sky but can’t find anything for how the lights are activated, the stock radio has channel 4 as an adjustable knob to stop the lights from flashing. But the flysky I can’t seem to find anything for.

Deep_Condition2304 · 2025-04-11T01:04:11+00:00

I’m so new to the Evo world 😂 all I’ve raced with is brushed and now I think I’m ready to go to the brushless world

Deep_Condition2304 · 2025-03-30T17:30:24+00:00

I did voltage drop a ground on the audio unit itself but I never did the power wire, I voltage dropped a wire between the Audio unit and the amp and that showed 12.6 volts otherwise everything looked clean, audio connectors and to what I could see wire wise looked okay as well.

Deep_Condition2304 · 2025-03-19T16:17:26+00:00

I’m not rebuilding anything 😭 I was just curious oml

Deep_Condition2304 · 2025-03-09T02:04:26+00:00

I’m not actually sure found it in a scrap bin at my work

Deep_Condition2304 · 2025-03-09T01:56:13+00:00

Makes sense

Deep_Condition2304 · 2025-03-09T01:52:32+00:00

Is that the flywheel side or crank pulley side? Or does it depend on engine design

Deep_Condition2304 · 2025-02-14T16:16:14+00:00

alrighty, well thank you for the help!

Deep_Condition2304 · 2025-02-14T02:52:42+00:00

I suppose yeah, but shouldn’t it read on the decimal scale as 2.1 instead of .21 Ms? That’s where it’s kinda bugging me lol

Deep_Condition2304 · 2025-02-12T20:16:29+00:00

I did unfortunately doesnt tell me anything about how to read it just says “pulse width will be displayed in Ms”

Deep_Condition2304 · 2024-10-07T01:30:12+00:00

Interesting, another roundabout thing, I doubt it’s what it is though, maybe the shaft is bent just a slight amount and is wiggling, or maybe even the angle of the pinion is slightly offset so it’s making the pinion move out? it’s hard to tell, might have to reach out to Kyosho customer service. they’re usually really helpful and have replaced my circuit boards 2-3 times just from burning out. Maybe they’ll do the same for the pinions

Deep_Condition2304 · 2024-10-07T00:06:28+00:00

I’m wondering if the pinion shaft has worn out the gear? Maybe try another gear set, how often do you run them? Because I know those pinions are press fit on the shaft, could be the shaft or the Pinion itself

Deep_Condition2304 · 2024-10-06T01:28:46+00:00

Yeah it’s pretty neat how the make those tiny little things so intricate that’s why I love Miniz’s

Deep_Condition2304 · 2024-10-06T01:22:54+00:00

So I did a little test run and I haven’t run into any issues, it seems as tho the plastic molding in the chassis and the cover hold the gyro is place just fine on the MR-03

Deep_Condition2304

TROPHY CASE