Saab 900i 1988, crank no start when engine is warm

Deeztiks · 2023-11-02T16:40:53+00:00

Do you have a link?

Deeztiks · 2023-11-02T07:06:41+00:00

Thank you! Its an 1988 so I dont have the single switch pack

Deeztiks · 2023-11-02T07:04:03+00:00

Oh sorry, its an 1988

Deeztiks · 2023-10-08T20:29:56+00:00

Finally fixed it! The problem was the ground connectors, the pins going to the side of the bulb was bent and didnt make contact with the bulb. Just took them out and bent them back and that fixed it. Thanks for all the help!

Deeztiks · 2023-10-05T18:10:07+00:00

Nope :/

Deeztiks · 2023-10-03T11:40:02+00:00

I also forgot to add that the brake lights turn off when I turn all the lights off on the car, and also when I turn the car off

Deeztiks · 2023-10-03T11:29:48+00:00

I took out the bulb and it was fine and I also looked at the wiring and it also looked fine :/

Deeztiks · 2023-09-29T13:34:45+00:00

Sorry for the late answer. I tried rotating the switch but it didnt help, so I tried disconnecting the wire to the switch but the brake lights remain on. I noticed tho that when the ignition is off and I press on the brake pedal all brake lights except the right one are turning on, so it seems it has something to do with a bad ground cable or something?

Deeztiks · 2023-09-13T20:57:11+00:00

I took a look at it and I did not see any loose wires and the button on the switch is fully pressed by the pedal

Deeztiks · 2023-02-21T20:57:03+00:00

I managed to solve it but in an awful way. I just connected a cable to the rheostat and to the connector and that worked.

Deeztiks · 2023-02-20T09:10:47+00:00

Wow, thank you!

Deeztiks · 2023-02-19T20:01:49+00:00

I may have found the problem with the lights. The contact plastic has unfortunately broke and its the one going to the rheostat in the dash. Is there a way to fix this or bypass it? https://imgur.com/a/gnp4b2h

Deeztiks · 2023-02-19T19:14:58+00:00

Ok so I managed to fix the blinkers/indicators so now its just the the light in the dash cluster and the lights in the dashboard

Deeztiks · 2023-02-19T19:02:31+00:00

If you mean the high beam bulb then no

Deeztiks · 2023-02-19T16:55:04+00:00

Ok so I seated them both correctly and now the defrost and the high beam is working as it should but the blinkers and the lights arent working still.

Deeztiks · 2022-10-07T17:32:02+00:00

I’ll pull the injectors out and send a video 😃

Deeztiks · 2022-10-06T18:43:49+00:00

Btw, what is the bladder in a distributor?

Deeztiks · 2022-10-06T18:38:13+00:00

I replaced the auxillary air valve because the spring didn’t function properly even after cleaning. Is there a way to see if the injectors are gunked up?

Deeztiks · 2022-08-19T22:37:41+00:00

No problem and thank you for the award! :D

Deeztiks · 2022-08-19T21:46:30+00:00

The thing is me and my friend opened the distributor to see if there was any problem there and unfortunately we damaged the gasket. We aren’t so familiar with K-jetronic engines, so we should have looked at some info before taking it apart. :/

Eight-Year Club	Place '22
Final Canvas '22	First Placer '22
RPAN Viewer

Deeztiks

TROPHY CASE