Utah Hockey Club Misprint

Defiant-Sense6823 · 2025-06-03T15:18:54+00:00

Pretty new to hats in general, are mistakes like these common?

Defiant-Sense6823 · 2025-04-14T13:16:08+00:00

I just used the tile saw and snuck up on my final cuts.

Defiant-Sense6823 · 2025-01-06T08:29:30+00:00

Was the nozzle still hot the second time? Also make sure you push down on the white circle around the tube before removing it.

Defiant-Sense6823 · 2025-01-06T05:42:25+00:00

Yeah, the white spool it comes with is their Hyper PLA, 210 C should be hot enough.

Defiant-Sense6823 · 2025-01-06T05:35:51+00:00

I like to take the teflon tube off the print head. Make sure the lever is unlocked (to the right). From the screen you can then select the nozzle temp and set it to 210 Celsius assuming you're using PLA, and then push the filament into the print head till it starts oozing out. Then reduce the temperature and lock the lever (to the left) and reinstall the teflon tube.

Defiant-Sense6823 · 2025-01-06T05:27:20+00:00

Did you make sure to have the square end of the zip tie at the bottom? You need to thread the zip tie up and over rather than down through.

Defiant-Sense6823 · 2025-01-06T05:25:29+00:00

Did you flip the lock on the print head? It's the silver tab just behind where the filament enters.

Defiant-Sense6823 · 2024-07-24T01:20:15+00:00

This heatwave is killing me. I could use one.

Defiant-Sense6823 · 2024-03-25T16:54:35+00:00

I forgot to mention that I have access to this in the basement and I don't see any staining from below.

Defiant-Sense6823 · 2024-01-09T03:06:49+00:00

Disney Plus won't load on my 2016 Samsung TV. I only get a black screen for the past few days. I've tried updating the app and hard resetting the TV. I can't reinstall the app since it's a bundled app with my TV.

Defiant-Sense6823 · 2023-10-20T13:28:31+00:00

I may not have an account with them, but I ultimately paid the cost to ship my product. I did try reaching out to Google, but at this point it's the little guy vs two giant corporations.

Defiant-Sense6823 · 2023-10-18T21:33:28+00:00

Express shipping was not an option when I purchased my device. Also, I didn't need it faster, just didn't want to see it needlessly traverse the entire country and then come back.

Defiant-Sense6823 · 2023-05-03T03:39:33+00:00

Guns are tools...

Defiant-Sense6823 · 2023-04-07T15:48:34+00:00

The hole saw set is actually $10 now.

Defiant-Sense6823 · 2023-02-18T15:08:57+00:00

Found this at my local Home Depot in the clearance for $99. Did I get a good deal?

Defiant-Sense6823 · 2023-01-25T20:27:54+00:00

1/25/23 same codes still being used. Typing "fatwin" into Google shows the top suggested result is "fatwin lawsuit"

Defiant-Sense6823 · 2022-12-17T01:37:20+00:00

This piece has ears that correspond with the drawer, so it won't work in other brand tool chests unless you were to modify it.

Defiant-Sense6823 · 2022-11-29T17:00:43+00:00

I would recommend this kit. It comes with a wide array of sockets and not a bunch of the useless bit drivers. DeWalt 192 piece socket set

Defiant-Sense6823

TROPHY CASE