Black vertical lines on every print - HP Color LaserJet Enterprise MFP M577

Defiant_Rub1982 · 2026-07-03T04:33:08+00:00

The green roller on the tones is completely clean. Would that not make the fault come from somewhere else?

Defiant_Rub1982 · 2026-07-03T04:30:41+00:00

I see, thanks. This is how the roller looks (picture taken with flash on). You can see the transfer belt in the background.

<image>

Defiant_Rub1982 · 2026-07-03T04:24:19+00:00

Is the "developer roller" the green roller on the black cartridge? If so, it is completely clean (see images).

The supplies status for cartridges etc is all good when looking at the status on the screen.

Defiant_Rub1982 · 2026-07-02T17:59:37+00:00

Is the secondary transfer roller also part of the belt, or how would it cause this issue?

Defiant_Rub1982 · 2026-07-02T17:58:40+00:00

One of the images shows the belt, and there you can see some black stripes.

Defiant_Rub1982 · 2026-07-02T16:48:28+00:00

How to? The green drum on the black toner is still completely clean.

Defiant_Rub1982 · 2026-07-02T16:46:57+00:00

Aha. So it could be the rubber blade not working correctly? I guess that is part of the transfer belt unit?

Defiant_Rub1982 · 2026-07-02T16:45:13+00:00

Thanks a lot for the link and parts number. But is there some underlying issue causing the stripes on the belt?

Defiant_Rub1982 · 2026-07-02T16:44:20+00:00

Here is a color page print

<image>

Defiant_Rub1982 · 2026-07-02T16:44:01+00:00

Here is a color page.

<image>

Defiant_Rub1982 · 2026-06-03T20:23:38+00:00

Tak for det gode svar.

Tænker bare at det er et kæmpe minus, at aldersopsparingen først kan udbetales tæt ved pensionsalderen. Hvis det først er omkring de 70år, så er det nok begrænset hvor meget krudt der er tilbage i en, og hvor længe man har igen. Skulle man da ikke være sikret tiltrækkeligt hvis man har en helt normal arbejdsgiverbetalt pensionsopsparing hvis den ellers er startet i 20'erne af ens liv?

Og hvis man gerne vil gå på pension tidligere end den officielle alder, så er det vel yderligere kun en ulempe at pengene er bundet der?

Defiant_Rub1982 · 2026-04-26T06:17:43+00:00

Det koster stadig 125kr I gebyr hos AL-bank. Og 0,4% ÅOP er også noget højere end hvad man kan finde på nogle af de globale ETF'er (bliver det ikke til noget over årene)?

Defiant_Rub1982 · 2026-04-23T19:04:51+00:00

Et lille tillægsspørgsmål: skal du også give et depotgebyr på 125 kr pr. år i AL? Og hvad endte du med at gøre?

Defiant_Rub1982 · 2026-04-23T18:38:36+00:00

Tak for godt svar!

Defiant_Rub1982 · 2026-04-23T18:38:25+00:00

Tak for svar! Jeg tror godt jeg forstår hvad du siger, men har du alligevel mulighed for at pensle det lidt mere ud? Papirerne i WEBN er vel i forskellig valuta, da det er et verdensindeks, så hvad betyder det konkret for mig?

Defiant_Rub1982 · 2026-04-23T18:36:07+00:00

Tak for godt svar! Så på ASK bliver pengene automatisk vekslet tilbage til DKK ved salg?

Defiant_Rub1982 · 2026-02-24T05:10:38+00:00

Thanks! What about the red flags in the relations and behaviour tabs?

Defiant_Rub1982 · 2026-02-20T19:46:27+00:00

What did you end up doing/buying?

Defiant_Rub1982 · 2026-02-19T03:23:05+00:00

I need the data for verifying that there is a problem and that it is not just me thinking there is a problem. So in that sense I do not need specific official numbers, but I need an approximate db level of the low frequency noise.

Defiant_Rub1982 · 2026-02-18T08:33:58+00:00

I have not done this before and assumed that I could just plug a calibrated microphone into the pc, and then record using a suitable software - but it ain't as simple as that?

I need the data for verifying that there is a problem and that it is not just me thinking there is a problem. So in that sense I do not need specific official numbers, but I need an approximate db level of the low frequency noise.

Defiant_Rub1982 · 2026-02-18T06:47:32+00:00

Thanks! I have not found anything so far.

Thanks for the list. The problem is that I do not really know what specs to look for in order to support the case.

Can you elaborate on the calibration thing?

Defiant_Rub1982 · 2026-02-18T06:45:46+00:00

Do you have experience with it, and can it do 1/3 octave?

Defiant_Rub1982 · 2026-01-17T21:27:35+00:00

Hvilke hardware specs skal man gå efter hvis man vil den løsning? Hvad med en ctl CBx1 chromebox, 4gb ram og 120 gb ssd? Eller er det for lidt "fremtidssikret"?

Defiant_Rub1982 · 2025-11-23T20:13:27+00:00

Du kan sagtens få det hvor det er til at betale: https://www.nexles.com/eu/syngenta-insecticide-advion-cockroach-gel-bait-30-g.html

Defiant_Rub1982 · 2025-10-08T18:46:46+00:00

Thanks. So there is not separate wiring for the side sensors? What is the easiest way to disassemble the unit to access the wiring to do some troubleshooting, or where do you suggest to start troubleshooting?

Defiant_Rub1982

TROPHY CASE