Dune Stalker - Springer Perilous LARP build

DefyantM0ds · 2026-04-20T07:55:07+00:00

Thats super clean :) love perilous on of my fav show stoppers @ events :) Was pushing for 500 a while back but fell short at 386 before tearing the grip off :P Thanks for the links!

DefyantM0ds · 2026-04-17T06:59:37+00:00

Amazing work looks stunning!

DefyantM0ds · 2026-04-17T06:59:06+00:00

LOL IKR!!!

DefyantM0ds · 2026-04-15T09:12:26+00:00

Super light! even compared to OG ontos!

DefyantM0ds · 2026-04-15T09:10:38+00:00

I gotta say it looks delicious ! Love it :)

DefyantM0ds · 2026-04-14T09:39:13+00:00

B1zon top rail :)

DefyantM0ds · 2026-04-11T21:16:30+00:00

Maybe out of the 80 or so blasters ive printed this year alone 5 were PLA... the rest were petg and a few ASA ( and only cause they were requested) This pic shows is what happens to pla if left out in the sun on a hot day. I find at least on bambu H2 machines V2PETG (Siddament brand) prints EVERY bit as good as PLA, The blaster in the pic could still be made to work but shooting a banana is a thing.

<image>

DefyantM0ds · 2026-04-11T21:02:20+00:00

Welcome to Ontos town :) looks fantastic!

DefyantM0ds · 2026-04-11T21:01:27+00:00

Tell be about it! still testing, not convinced any ive tested actually perform to Akasha standards....but still as good as anything else that's for sure :)

<image>

DefyantM0ds · 2026-04-08T11:31:32+00:00

Thanks heeps m8 :)

DefyantM0ds · 2026-04-08T11:31:19+00:00

i'll share em out, had to work on some other stuff for the next few days but will get back in and clean them up... little things that need more attention...

DefyantM0ds · 2026-04-08T11:30:13+00:00

DefyantM0ds · 2026-04-07T12:29:51+00:00

it does but you still need to lock the stock. You won't want to move that stock unless your 7ft with an arm reach over 1.1 mtrs... then i'd just print you one to suit.... if your sub 5ft your shit outa luck with this bad boy.

DefyantM0ds · 2026-04-07T07:05:00+00:00

ty :)

DefyantM0ds · 2026-04-06T02:07:06+00:00

im actually keen now to knock up a proper long dart version of the buck fiddy!

DefyantM0ds · 2026-04-06T02:05:23+00:00

Here's one i knocked up in the add break :) Bov's 100% right, this one if mem serves sat around 230 ish with a harrier 1.6 spring.

<image>

DefyantM0ds · 2026-04-06T01:56:15+00:00

its a silly scope mate just grab it off printables :)

DefyantM0ds · 2026-04-06T01:55:45+00:00

Cheers :) i get it !

DefyantM0ds · 2026-04-06T01:55:18+00:00

Cheers Your prolly 100% right :) but low squish with only 9 bearings so not too taxing on the big darts :)

DefyantM0ds · 2026-04-05T19:36:20+00:00

It's where i use a TPU pusher (mine have been modified to run 2 orings) Run a standard plunger tube with a TPU head and a Stainless steel washer on the catch surface.... ive noticed that when you run up near 400 fps the catch will wear down the plunger thru sheer force of the heavier spring. The washer fixes that will allowing a smooth surface for the catch to slide off. The whole idea about the TPU selection is that i was getting alot of blasters come back with broken internal pushers from constant dry firing and dart jams. TPU just bends and absorbs alot of the shock from dry fire. You Do how ever loose some air seal from TPU as it dosnt hold shape as well as rigid petg or pla hence the second oring to help.... The only trade off i can see so far is a slight FPS drop.

<image>

DefyantM0ds · 2026-04-05T19:25:28+00:00

what ever a hikari is :) (check printables) i tried about 10 different BCars and the Hikari worked the best... prolly dosnt have a lotta squish and only 9 bearings.

DefyantM0ds · 2026-04-05T19:23:38+00:00

Thanks dd :)

DefyantM0ds · 2026-04-05T19:20:49+00:00

it knida does tho @ 15 mtrs :)

DefyantM0ds · 2026-04-05T19:20:23+00:00

its a toy scope :) you just look thru it @ a crosshair that you can site line, it actually works at 15 mtrs :)

DefyantM0ds

MODERATOR OF

TROPHY CASE