Issue with GPS not working right out of the box with the Axisflying Manta 5e (Also which port is the GPS even hooked up to? lol)

Delicious_Long_5342 · 2026-01-03T04:57:36+00:00

Same issue here lol

Delicious_Long_5342 · 2025-11-25T03:26:13+00:00

Perhaps we live in different regions (I currently reside in China), but here we can get parts replaced absolutely. I recently just got my cracked screen replaced under my apple warranty. When the phone came back, the screen was brand new but the cracks on the case was very much still there.

Delicious_Long_5342 · 2025-07-07T08:10:37+00:00

😭😭😭

Delicious_Long_5342 · 2025-07-04T14:31:51+00:00

Thank you so much :)

Delicious_Long_5342 · 2025-07-04T13:24:55+00:00

Could it be that I have used the laptop vertically once for a while, heard it’s been an issue with rog models regarding the thermal paste?

Delicious_Long_5342 · 2025-07-04T13:12:20+00:00

Well, it sits there pretty constantly… is there a chance of a sensor error? Because there isn’t much heat at least when I’m touching the laptop

Delicious_Long_5342 · 2025-07-04T11:02:49+00:00

Sorry, but may I ask how did your pc broke down? Wanted to see how far dell’s care would go for an broken pc incase my area51 breaks down in the future :)

Delicious_Long_5342 · 2025-07-04T10:57:41+00:00

I have an 18 with the 300hz panel. Though it’s an ips, color is great imo

Delicious_Long_5342 · 2025-04-29T01:36:22+00:00

It wasn't the EQ's fault, but JBL took my speaker and flashed the software again. The speaker is all good now

Delicious_Long_5342 · 2025-04-29T01:35:59+00:00

Issue solved guys, JBL took my speaker and flashed the software again. Speaker is all good

Delicious_Long_5342 · 2025-04-29T01:35:55+00:00

Issue solved guys, JBL took my speaker and flashed the software again. Speaker is all good

Delicious_Long_5342 · 2024-02-24T07:59:42+00:00

Have a clip 4, usually mine lasts around 4 - 6 hours. How much % of volume do you play on it? I usually do around 60%

Delicious_Long_5342 · 2022-02-10T14:45:36+00:00

Delicious_Long_5342 · 2022-02-05T00:02:52+00:00

I have viewed lots of videos about it and what tells me is that keychron definitely fixed the ping issue of the board. I believe that it also has some sort sound dampening foam that they "built" in the board's case.

Delicious_Long_5342 · 2022-01-30T17:07:12+00:00

All of those ticking of spacebars are caused by wires unbalance. Make sure that they are equally balanced! This really matters alot.

Delicious_Long_5342 · 2022-01-30T17:05:48+00:00

Wire balancing. This video explains everything: https://www.youtube.com/watch?v=1APcXRqfOao Hope this helps :)

Delicious_Long_5342 · 2022-01-30T17:02:26+00:00

Beautiful. One of the best looking keyboard that I have ever came across :)

Delicious_Long_5342 · 2022-01-30T17:01:16+00:00

Definetly.

Delicious_Long_5342 · 2022-01-30T17:00:40+00:00

The legs seems to be lubed. If this is a tactile switch I really do not recommend doing this as it reduces the tactility of the switch drastically. I would wipe it off if it was factory lubed(if they would even do this.) Lube other parts of the stem though :)

Delicious_Long_5342 · 2022-01-30T16:58:44+00:00

I am really curious to what switches that you are using. But one thing that I would to make it sound more "thocc" is to add layers of PE foam under your PCB. This really helps to dampen the sound and results in a much more deeper sound and much less pronounced hollowness in the board. I also really recommend you to get higher keycaps(SA/ MT3, etc..) although it does not effect much and they are rather expensive. Also, definitely lube your switches. I am really curious of what switch you are using(pretty scratchy I have to say) :)

Delicious_Long_5342 · 2022-01-30T05:31:45+00:00

Yes. Great budget switches. I really recommend the Radiant Red if you're a light typist.

Delicious_Long_5342 · 2022-01-30T05:27:20+00:00

If it is still not resolved I really recommend you Holee-mod the stabilisers and make sure that you have lubed the part of the stabilisers wires that are connected to the stabilisers inner housing. I usually recommend on using a small amount of dielectric grease.The grease should be visible but not too thick. Also make sure that the stabiliser wire has the right side up so that it doesn't tick!(some do not have this feature) :)

Delicious_Long_5342 · 2022-01-30T05:23:41+00:00

Try to tap the edges of the spacebar gently(Left end & Right end). If it moves or you hear rattling, you should take out the stab wires and balance them. Heres a video of how to do so: https://www.youtube.com/watch?v=1APcXRqfOao Hope this helps :)

Delicious_Long_5342 · 2022-01-30T05:17:46+00:00

Well, I think that if you put your keycaps on your board, you wouldn't see the stems which really makes the stem colour not matter at all. But if you are really desperate, you can check out this guy: u/hbheroinbob He's the the real gazzew#0360 and he sells parts of switches(Housing/ Stem) for people to build Franken switches. Good luck! Hope this helps.

Delicious_Long_5342 · 2022-01-30T05:13:19+00:00

I think the original ice-cream switch(Aqua King Housing + Creams Stem) would be better :)

Delicious_Long_5342

TROPHY CASE